Reaction Mechanism Investigation Using Vibrational Mode Analysis for the Multichannel Reaction of CH_3O+CO

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｍｅｔｈｏｘｙｒａｄｉｃａｌ (ＣＨ3Ｏ)ｉｓａｎｉｍｐｏｒｔａｎｔｉｎｔｅｒ ｍｅｄｉａｔｅｉｎｔｈｅｐｈｏｔｏｃｈｅｍｉｃａｌｏｘｉｄａｔｉｏｎｏｆｈｙｄｒｏｃａｒｂｏｎｓｉｎｔｈｅａｔｍｏｓｐｈｅｒｅ ,1 3ａｎｄｐｌａｙｓａｓｉｇｎｉｆｉｃａｎｔｒｏｌｅｉｎｔｒａｎｓ ｆｏｒｍｉｎｇｎｉｔｒｉｃｏｘｉｄｅｔｏｎｉｔｒｏｇｅｎｄｉｏｘｉｄｅ .4 Ｓｉｍｉｌａｒｌｙ ,ｔｈｅｒｅａｃｔｉｏｎｍｅｃｈａｎｉｓｍｓｏｆｈｙｄｒｏｘｙｌａｎｄｃａｒｂｏｎｍｏｎｏｘｉｄｅ5,6ａｎｄｏ…     

Synthesis for robust synchronization of chaotic systems under output feedback control with multiple random delays

Synchronization under output feedback control with multiple random time delays is studied, using the paradigm in nonlinear physics—Chua’s circuit. Compared with other synchronization control methods, output feedback control with multiple random delay is superior for a realistic synchronization application to secure communications. Sufficient condition for global stability of delay-dependent synchronization is established based on the LMI technique. Numerical simulations fully support the analytical approach, in spite of the random delays.     

Monte Carlo simulation of grain growth in polycrystalline materials

Understanding the kinetics of grain growth, under the influence of second phase (such as impurities, voids and bubbles) is fundamental to advances in the control of microstructural evolution. As a precursor to this objective, we have investigated the grain growth kinetics in a polycrystalline material using a standard Q-state Potts’ model under Monte Carlo settings. Based on physical reasoning, new modifications are suggested to circumvent some of the disadvantages in the basic Potts model. The efficacy of these modifications vis-à-vis the basic model is verified. The influence of second phase particles on the impurity loaded grain boundaries is investigated for the study of grain growth kinetics.     

In situ transmission electron microscopy study of the nucleation and grain growth of Ge2Sb2Te5 thin films

The nucleation and grain growth of the Ge₂Sb₂Te₅ (GST) thin films were studied using high voltage electron microscope operated at 1250 kV. As a result, we have found that 2 nm-sized nucleus forms as a cluster which atoms are arranged regularly at the stage of nucleation prior to the formation of grains having crystal structure. The high-resolution transmission electron microscopy study and fast-Fourier transformations revealed that coexistence of face-centered-cubic (FCC) and hexagonal structure occurs, and formation of twin defect is found in the hexagonal structure during the grain growth as the annealing temperature is increased. GST grain having the hexagonal structure grow from the surface, and the growth proceeded perpendicular to the [0 0 0 1], namely the path parallel to the (0 0 0 1) plane. Consequently, grain growth to a large-scale result in a lengthened shape.     

Electroless deposition of open-end Cu nanotube arrays

Cu nanotube arrays were fabricated by electroless deposition using porous anodic aluminium oxide membranes as templates. This was accomplished by a four-step procedure, i.e. pore-wall modification, polishing treatment, sensitization-activation and electroless deposition. The as-synthesized Cu nanotubes possess controllable inner diameter and open ends.     

超模的同构定理

本文利用模论导出超模的三个同构定理,同时,给出超模的Jordan-Holder定理,最后,探讨了超模的基本关系∈~*,并研究其性质．     

Pd (II)‐catalyzed vinyl addition polymerization of novel functionalized norbornene bearing dimethyl carboxylate groups

Three novel functionalized polynorbornenes (PNB) with pendant dimethyl carboxylate group (carboxylates—acetate, propionate, and butyrate) are synthesized as a vinyl‐type with a palladium (II) catalyst in high yield. The effects of size of substitutents, molar ratio of monomer to catalyst, solvent polarity, reaction time, and temperature on the polymerization of exo‐norbornene dimethyl propionate were systematically investigated. The low molar ratio and temperature, as well as high polarity of solvent, and long reaction time, are favorable for the enhancement of the monomer conversion, especially, the solvent have an obvious effect on the catalyst activity. The resulting poly(cis‐norbornene‐exo‐2,3‐dimethyl carboxylates) (PNB‐dimethyl carboxylates) show good solubility in common organic solvent and high thermal stability up to 360 °C. The glass transition temperature was detected by DMA at 331, 324, and 318 °C for acetate, propionate, and butyrate, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3391–3399, 2007     

用超磁致伸缩调谐光纤光栅的光分/插复用器

提出并研究了一种新型多信道切换的全光分/插复用器,它主要由光纤Bragg光栅(FBG)和一对光环行器组成.采用了一种高效的超磁致伸缩材料(GMM)使FBG产生有效的Bragg波长偏移.用控制电流来调控FBG的应变和Bragg波长偏移.用4只相同的FBG与波长叠加技术相结合,可建立能提供15种不同下路信道方式的OADM.     

Response to high acidity and basicity at a platinum electrode in chronopotentiometry

A simple and rapid method is developed to determine the high acidity and the basicity of solutions by chronopotentiometry with a platinum working electrode. The acidity range from 5.0 mol/l H⁺ to 1.0 mol/l OH⁻ can be measured by the adjustment of deposition potential and time. The response mechanism to acidity and basicity has been explored. The transition potential plateau in chronopotentiograms is caused from the oxidation of hydrogen adsorbed on electrode surface.     

On the Strong Law of Large Numbers and the Law of the Logarithm for Weighted Sums of Independent Random Variables with Multidimensional Indices

Let (X, X ; ^d} be a field of independent identically distributed real random variables, 0 < p < 2, and {a _, ; ( , ) ^d × ^d, ≤ } a triangular array of real numbers, where ^d is the d-dimensional lattice. Under the minimal condition that sup _, |a _, | < ∞, we show that | |^{− 1/p} ∑ _≤ a _, X → 0 a.s. as | | → ∞ if and only if E(|X|^p(L|X|)^{d − 1}) < ∞ provided d ≥ 2. In the above, if 1 ≤ p < 2, the random variables are needed to be centered at the mean. By establishing a certain law of the logarithm, we show that the Law of the Iterated Logarithm fails for the weighted sums ∑ _≤ a _, X under the conditions that EX = 0, EX² < ∞, and E(X²(L|X|)^{d − 1}/L₂|X|) < ∞ for almost all bounded families {a _, ; ( , ) ^d × ^d, ≤ of numbers.