Efficient microwave induced direct α-halogenation of carbonyl compounds

A novel and direct method for the synthesis of α-halocarbonyl compounds using sequential treatment of carbonyl compounds with [hydroxy(tosyloxy)iodo]benzene followed by magnesium halides under solvent-free microwave irradiation conditions is described.     

The Analysis and Improving of the Microwave Exciter in the Lower Hybrid Wave System

When we carry out lower hybrid wave heating and current driving plasma experiment at tokamak, we need mega-watt order of microwave power. The microwave signal at frequency of 2450 MHz is generated by a microwave exciter. According to the experiment＇s demands, the microwave exciter must provide output power of 1.5～ 2. 5 W with stabilized frequency and amplitude tobe used as the klystron input. Being amplified by the klystron, the microwave signal is transmitted through the transmitting system to the antenna and is emitted into the HL-2A tokamak. So we can see that the microwave exciter＇s function is very important to the lower hybrid wave heating and current driving plasma experiment.     

The structure of invertible substitutions on a three-letter alphabet

We study the structure of invertible substitutions on three-letter alphabet. We show that there exists a finite set of invertible substitutions such that any invertible substitution can be written as I_wσ₁σ₂σ_k, where I_w is the inner automorphism associated with w, and for 1jk. As a consequence, M is the matrix of an invertible substitution if and only if it is a finite product of non-negative elementary matrices.     

The Design for Automation of Pellet-Forming Process in HL-2A Pellet Fueling System

In the ever fusion experiments in SWIP, pellet forming process was carried out through adjusting relative devices by staff member in site, which will make every pellet-forming process slight distinction and will result in pellet difference in shape, size and intensity. In the intervals of HL-2A discharges, staff member have to go site to accomplish the pellet-forming process, this wastes human power and increase the potential danger. So it is necessary to develop a remote control system to perform the pellet-forming process. The control system needs have the features of real-time, reliability and be easy to operate and maintain.     

Effect of induced shielding current transmission in longitudinal direction on levitation force of melt grown single-domain YBa_2Cu_3O_(7-x) cylindrical superconductor

YBa2Cu3O7-x (YBCO) bulk is one of the most important high temperature superconducting materials for magnetic levitation applications, because it has a high magnetic irreversibility field Hirr at liquid nitrogen temperature, and can grow into large grains. The levitation force of YBCO bulk is proportional to the critical current density (Jc) and grain radius (r)[1], so higher Jc and r are appreciated for YBCO bulks to achieve higher levitation force. Now single-domain YBCO bulks up to s…     

非线性光纤环形镜的脉冲透过特性研究

研究了光纤反常色散区非线性环形镜（NOLM）的脉冲透过特性，得到NOLM周期性透过率函数 第一极大值处透过率、压缩比和对应的孤子阶数与环长之间的函数关系图.通过比较长环和 短环NOLM对无啁啾、啁啾脉冲的透过率和压缩比特性，得出了长环有利于脉冲整形而短环有 利于脉冲压缩的结论. 关键词： 非线性环形镜 透过率 压缩比 孤子阶数     

Deposition of Hydrogen-Free Silicon Nitride Thin Films by Microwave ECR plasma Enhanced Magnetron Sputtering at Room Temperature

Hydrogen-free silicon nitride （SiNx） films were deposited at room temperature by microwave electron cyclotron resonance （MW-ECR） plasma enhanced unbalance magnetron sputtering system. Both Fourier-transform infrared spectroscopy and x-ray photoelectron spectroscopy are used to study the bonding type and the change of bonding structures of the silicon nitride films. The results indicate that the chemical structure and composition of SiNx films deposited by this technique depend strongly on the N2 flow rates, the stoichiometric SiNx film, which has the highest hardness of 22.9 GPa, could be obtained at lower N2 flow rate of 4 sccm.     

Crystallographic report: Bis{[diacetyl‐bis(2,6‐isopropylphenylimine)]nickel(I)(µ‐chloro)}

The first α‐diimine nickel(I) complex having a chloro bridge is reported. The centrosymmetric dinuclear structure of {[ArN?C(Me)C(Me)?NAr]NiCl}₂[Ar?2,6?C₆H₃(i‐Pr)₂] features two chelating α‐diimine ligands and two bridged chlorine atoms, so that a distorted tetrahedral N₂Cl₂ coordination geometry for nickel results. Copyright © 2004 John Wiley & Sons, Ltd.     

芴与硒吩共聚物的光致发光与电致发光研究

采用不同共聚比例的9，9-二辛基芴和硒吩的共聚物制备了发光二极管。研究了不同硒吩含量对器件性能的影响。针对共聚物的特点和器件存在的问题，采用阴极界面修饰及高分子共混的方法。使器件的性能得以提高。     

如何发现问题

在现代的各种教学思想中，都强调如何让学生在特定的教学资源中独立发现问题．因为发现问题是学习的起点，是对已有状态进行更深入的反思，没有问题的学习，从教的角度说叫“填”．从学的角度说叫“机械记忆”．发现问题的具体方法有如下几种．