One-step preparation of positively-charged gold nanoraspberry

Self-assembling particles were prepared by a new synthetic strategy for a raspberry-like aggregate, based on three-dimensional particle-aniline oligomer-particle repeated sequences; this one-step process, without the need for extra control, organic solvents, or ligand exchange, could further help in the realization of nanoscale electronics and molecular devices.     

Spallative ablation of dielectrics by X-ray laser

A short laser pulse in wide range of wavelengths, from infrared to X-ray, disturbs electron–ion equilibrium and increases pressure in a heated layer. The case where the pulse duration τ _L is shorter than acoustic relaxation time t _s is considered in the paper. It is shown that this short pulse may cause thermomechanical phenomena such as spallative ablation regardless of wavelength. While the physics of electron–ion relaxation strongly depends on wavelength and various electron spectra of substances: there are spectra with an energy gap in semiconductors and dielectrics opposed to gapless continuous spectra in metals. The paper describes entire sequence of thermomechanical processes from expansion, nucleation, foaming, and nanostructuring to spallation with particular attention to spallation by X-ray pulse.     

A six-axis hybrid vibration isolation system using active zero-power control supported by passive weight support mechanism

This paper presents a six-degree-of-freedom hybrid vibration isolation system integrated with an active negative suspension, an active-passive positive suspension and a passive weight support mechanism. The aim of the research consists in maximizing the system and control performances, and minimizing the system development and maintenance costs. The vibration isolation system is, fundamentally, developed by connecting an active negative suspension realized by zero-power control in series with an active-passive positive suspension. The system could effectively isolate ground vibrations in addition to suppress the effect of on-board generated direct disturbances of the six-axis motions, associated with vertical and horizontal directions. The system is further reinforced by introducing a passive weight support mechanism in parallel with the basic system. The modified system with zero-power control allows simplified design of the isolation table without power consumption. It also offers enhanced performance on direct disturbance suppression and large payload supporting capabilities, without degrading transmissibility characteristics. A mathematical model of the system is presented and, therefore, analyzed to demonstrate that zero-compliance to direct disturbance could be generated by the developed system. Experimental demonstrations validate the proposed concept that exhibits high stiffness of the isolation table to static and dynamic direct disturbances, and good transmissibility characteristics against ground vibration. Further improvements of the vibration isolation system and the control system are discussed as well.     

Production of new charmoniumlike states in e+e- -->J/psiD*D[over](*) at sqrt[s] approximately 10.6 GeV

We report a study of the processes e+e- -->J/psiD*D[over](*). In J/psiD*D[over]* we observe a significant enhancement in the D*D[over]* invariant mass spectrum, which we interpret as a new charmoniumlike state and denote X(4160). The X(4160) parameters are M=(4156(-20)+25+/-15) MeV/c2 and Gamma=(139(-61)+111+/-21) MeV. We also report a new measurement of the X(3940) mass and width: M=(3942(-6)+7+/-6) MeV/c2 and Gamma=(37(-15)+26+/-8) MeV. The analysis is based on a 693 fb(-1) data sample recorded near the Upsilon(4S) resonance by the Belle detector at the KEKB asymmetric-energy collider.     

Influence of tabletting speed on compactibility and compressibility of two direct compressible powders under high speed compression

To examine the influence of tabletting speed on compactibility and compressibility under high speed compression, two direct compressible powders, alpha-lactose monohydrate and microcrystalline cellulose of different particle size ranges were compressed using an instrumented rotary press with varying tabletting speed and compression force. The maximum applied force and total time during compression (contact time) were determined from a time-force profile, and the relation between these parameters and properties of compacts was examined. For all lactose tablets, the porosity and tensile strength of compacts were less affected by compression rate though they depended on the applied force. However, the properties of microcrystalline cellulose tablets were varied depending on the tabletting speed in addition to the applied force. In an attempt to quantitatively evaluate the effect of compression rate on the compactibility, an empirical equation was derived from the numerical analysis of the experimental data. The compactibility parameters deduced from the equation well elucidated the effect of tabletting speed on the properties of microcrystalline cellulose tablets and lactose tablets made of various particle size powders.     

Extension of measurable range of film dosimetry by a low energy X-ray absorption method

The availability of an X-ray absorption technique employing a very low power X-ray tube was examined to extend measurable range for photographic film dosimetry. The X-ray tube having titanium target was operated at 8 kV and 0.2 microA to emit Ti KX-rays of moderate intensity. The degree of the Ti KX-ray absorption, defined as similar to photographic density, was measured for the two kinds of badge film, Fuji gamma-ray badge film and Kodak personal monitoring film, type 2 exposed for 60Co or 137Cs gamma-rays and developed by the respective standard procedures. The experimental results show that the dosimetric range of 0.01-100 R for the Fuji film and 0.03-1,000 R for the Kodak film may be easily measured by 1 minute counting with the relative statistical error (sigma) of 10%.     

Measurement of the CP asymmetry in B-->Xs gamma

Direct CP violation in the b-->sgamma process is a sensitive probe of physics beyond the standard model. We report a measurement of the CP asymmetry in B-->X(s)gamma, where the hadronic recoil system X(s) is reconstructed using a pseudoreconstruction technique. In this approach there is negligible contamination from b-->dgamma decays, which are expected to have a much larger CP asymmetry. We find A(CP)=0.002+/-0.050(stat)+/-0.030(syst) for B-->X(s)gamma events having recoil mass smaller than 2.1 GeV/c(2). The analysis is based on a data sample of 140 fb(-1) recorded at the upsilon(4S) resonance with the Belle detector at the KEKB e(+)e(-) storage ring.     

Measurements of the branching fraction and polarization in B+ --> rho+ K*0 decays

We present the results of a study of the charmless vector-vector decay B+ --> rho+ K*0, based on 253 fb(-1) of data collected with the Belle detector at the KEKB asymmetric-energy e+ e- collider. We obtain the branching fraction B(B+ --> rho+ K*0) = [8.9 +/- 1.7(stat) +/- 1.2(syst)] x 10(-6). We also perform a helicity analysis of the rho and K* vector mesons, and obtain the longitudinal polarization fraction f(L)(B+ --> rho+ K*0) = 0.43 +/- 0.11(stat)(-0.02)(+0.05) (syst).     

Observation of rho/omega meson modification in nuclear matter

We measured the invariant mass spectra of electron-positron pairs in the target rapidity region of 12-GeV p+A reactions. We have observed a significant difference in the mass spectra below the omega meson between p+C and p+Cu interactions. This difference indicates that the spectral shape of mesons is modified at normal nuclear-matter density.