Measurement of Gamma-Rays from 11ΛB and 12ΛC

From the ^12 C（π^＋,K^＋）^12 AC reaction the γ -rays of 261.6±0.24 ke V（7/2^＋ →5/2^＋）and 1481.7±0.7 ke V（1/2^＋ →5/2^＋） of ^11 A B,and 2667.3±2.8 keV（1^- 2 → 2^- 1）of ^12 A C hypernuclei have been identified using a large germanium detector array Hyperball2 at K6 beam line of KEK. The observed energies of the transitions 1481.7keV and 261.6 keV are significantly different from the values predicted by the shell model using the △ and SN parameters determined from the ^7 △ Li data.     

Admissibility and minimaxity of generalized Bayes estimators for spherically symmetric family

We give a sufficient condition for admissibility of generalized Bayes estimators of the location vector of spherically symmetric distribution under squared error loss. Compared to the known results for the multivariate normal case, our sufficient condition is very tight and is close to being a necessary condition. In particular, we establish the admissibility of generalized Bayes estimators with respect to the harmonic prior and priors with slightly heavier tail than the harmonic prior. We use the theory of regularly varying functions to construct a sequence of smooth proper priors approaching an improper prior fast enough for establishing the admissibility. We also discuss conditions of minimaxity of the generalized Bayes estimator with respect to the harmonic prior.     

Mobility performance of a rigid wheel in low gravity environments

To investigate influences of gravity on mobility of wheeled rovers for future lunar/planetary exploration missions, model experiments of a soil-wheel system were performed on an aircraft during variable gravity maneuvers. The experimental set-up consists of a single rigid wheel and a soil bed with two kinds of dry sands: lunar soil simulant and Toyoura sand. The experimental results revealed that a lower gravity environment yields higher wheel slippage in variable gravity conditions. In addition to the partial gravity experiments, the same experiments with variable wheel load levels were also performed on ground (1 g conditions). The on-ground experiments produced opposite results to those obtained in the partial gravity experiments, where a lower wheel load yields lower slippage in a constant gravity environment. In low gravity environments, fluidity (flowability) of soil increases due to the confining stress reduction in the soil, while the effect of the wheel load on sinkage decreases. As a result, both of these effects are canceled out, and gravity seemingly has no effect on the wheel sinkage. In the meantime, in addition to the effect of wheel load reduction, the increase of the soil flowability lessens the shear resistance to the wheel rotation, as a result of which the wheel is unable to hold sufficient traction in low gravity environments. This suggests that the mobility of the wheel is governed concurrently by two mechanisms: the bearing characteristics to the wheel load, and the shearing characteristics to the wheel rotation. It appears that, in low gravity, the wheel mobility deteriorates due to the relative decrease in the driving force while the wheel sinkage remains constant. Thus, it can be concluded that the lunar and/or Mars’ gravity environments will be unfavorable in terms of the mobility performance of wheels as compared to the earth’s gravity condition.     

Morphology and physical properties of a novel Ramie‐PU blended nonwoven by electrospinning: The effect of cosolvent ratio

A novel macro/nano blended nonwoven with excellent physical properties was prepared by electrospinning polyurethane (PU) nanofibers onto the surface of ramie webs under different weight ratios of N,N‐dimethylacetamide (DMAc)/acetone cosolvents. The ratio of cosolvents has a significant influence on the morphology, tensile properties, resilience, and thermal properties of the resultant samples. Bead‐free and fine interconnected nanofibers were obtained with an increase of acetone content up to 60 wt%. The total physical properties of the blended nonwovens were optimal for a DMAc/acetone ratio of 40/60, in which the tensile load at break, extension at break and Young's modulus were 441, 54, and 256% higher than that of pure ramie web, respectively. The resilience of the blended nonwovens was ～20% higher than that of nonblended ramie web. The significant improvement of physical properties may be due to the good connection between PU nanofiber membranes and ramie webs and the molecular chain structure differences, interconnected structural differences, and high extensibility of PU nanofibers, according to the results of crystallization by differential scanning calorimetry (DSC) and morphological observation by scanning electronic microscopy (SEM). © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1–14, 2010     

Novel Designs for Centrifugal Countercurrent chromatography: V. Comparative Studies on Performance of Various Column Configurations

The conventional toroidal coil in centrifugal countercurrent chromatography has a low level of stationary phase retention, since a half of each helical turn is entirely occupied by the mobile phase. In order to cope with this problem, several new column designs including zigzag, saw-tooth and figure-8 patterns have been introduced and their performance was compared in terms of retention of the stationary phase (Sf), peak resolution (Rs), theoretical plate number (N) and column pressures. Overall results of experiments indicate that the figure-8 column yields the highest Rs when the lower phase is used as the mobile phase. Since the column pressure of all these new columns are much lower than that in the traditional toroidal coil column, the separation efficiency can be improved using a long separation column without a risk of column damage by high back pressure.     

Counter-current chromatographic separation of nucleic acid constituents with a hydrophilic solvent system

Nucleic acid constituents such as nucleobases, nucleosides and nucleotides were separated by counter-current chromatography using type J coil planet centrifuge. The separation was performed with a hydrophilic solvent system composed of 1-propanol/800 mM potassium phosphate buffer (pH 7.4) (1:1, v/v) by eluting the lower aqueous phase at a flow-rate of 0.5 ml/min. Eight selected nucleic acid constituents (4.0 mg, 0.5 mg of each), uridine monophosphate (UMP), adenosine monophosphate (AMP), deoxyadenosine monophosphate (dAMP), uridine, urasile, deoxy uridine, adenosine and adenine were well resolved within 160 min.     

Vortex Counter-Current Chromatography: Performance of a New Preparative Column

A new preparative column for the vortex counter-current chromatograph was fabricated by making many (966) cylindrical separation units to a high-density polyethylene disk and then threading them with 6–40 taps. The resulting column had a total capacity of 364 mL. The performance of this vortex column was examined with three different two-phase solvent systems each using a set of suitable test samples: hexane–ethyl acetate–methanol–0.1 M hydrochloric acid (1:1:1:1, v/v) for the separation of DNP-amino acids; 1-butanol–acetic acid–water (4:1:5, v/v) for the separation of dipeptides; and hexane–acetonitrile–water (20:15:2, v/v) for the separation of Sudan dyes. Most of the separations show high partition efficiency of over a thousand theoretical plates, as expected based on the results previously obtained in preliminary separations with a small column. Overall, the results of the present study suggest that further improvement of the partition efficiency can be obtained by the modifying column configuration.

     

Localization and completion of nilpotent groups of automorphisms

We study nilpotent subgroups of automorphism groups in the category of groups and the homotopy category of spaces. We establish localization and completion theorems for nilpotent groups of automorphisms of nilpotent groups. We then apply these algebraic theorems to prove analogous results for certain groups of self-homotopy equivalences of spaces.