Optical properties of AgI/Ag infrared hollow fiber in the visible wavelength region

We report on AgI/Ag infrared hollow fiber with low-loss in visible region. Improved methods of silver plating and iodination were proposed to fabricate the hollow fiber. The surface roughness of the silver layer and the silver iodide layer was reduced by the pretreatment with an SnCl2 solution and low iodination temperature. Losses for the Er:YAG and green laser light were 0.4 and 7dB/m. The loss property of green laser beam was low to deliver a pilot beam for the invisible infrared laser light. Owing to the smooth and uniform AgI film, the loss spectrum of the hollow fiber showed clear interference peaks in the visible region. An empirical formula for AgI material dispersion was derived, which is of special importance for the design of high-performance AgI/Ag hollow fiber.     

Sonochemical preparation of composite nanoparticles of Au/gamma-Fe2O3 and magnetic separation of glutathione

We prepared Au/gamma-Fe2O3 composite nanoparticles by sonochemically reducing Au(III) ions employing no stabilizer in the aqueous solution to form stable Au nanoparticles and allowing them to attach onto the surface of gamma-Fe2O3 particles with an average size of 21 nm. Size of the formed Au nanoparticle depended on the initial concentration of Au(III) ions. The number of the Au nanoparticles, supported on each gamma-Fe2O3 particle was controlled by changing the relative amounts of Au(III) ions and gamma-Fe2O3 particles. The composite nanoparticles exhibited a high affinity with glutathione, a tripeptide with mercapto group so that separation and manipulation of glutathione in aqueous solutions could be performed by application of external magnetic field. Because the surfaces of the Au nanoparticles were not shielded by any stabilizers, or naked, sonochemically prepared Au/gamma-Fe2O3 composite nanoparticles seemed to show stronger affinity to the glutathione than those by the radiochemical method.     

Raman probe using a single hollow waveguide

A simple Raman probe was realized using a single flexible hollow waveguide (HW). A HW coated with a silver film, which had reasonable transmission and little optical background noise, was used as a bidirectional transmission fiber for both the excitation and collection of Raman scattered light. The HW itself generated no Raman scattering or fluorescence noise during transmission. A complex filtering system at the end of the waveguide was thus unnecessary. In addition, the measured Raman spectra showed better signal-to-noise ratios than a conventional Raman fiber probe. The HW's suitability as a Raman fiber probe was also demonstrated.     

A compact optical heterodyne interferometer by optical integration and its application

A compact high-resolution optical heterodyne interferometer combining a two-frequency light module and a minute optical system is described. The light module, which generates two independent frequencies of light, is fabricated by proton exchange method on LiNbO₃ substrate. We report an experiment evaluating measurement accuracy using a micro-displacement measurement system which incorporates this interferometer. Results of the experiment with a standard thickness sample show high thermal stability with maximum measurement error of 1.8 nm at a temperature from 19°C to 33°C. The system was used to measure the hysteresis of a piezoelectric element for displacements of several nm, thereby making it possible to analyze the system quantitatively in practice.     

Improved coating method for uniform polymer layer in infrared hollow fiber

An improved coating method was proposed in order to form a uniform polymer layer in the fabrication of cyclic olefin polymer-coated silver (COP/Ag) hollow fiber. A COP solution was flowed in a closed loop, in which the silver-coated tube was used as a part of the loop. Owing to the constant flowing speed of the COP solution and the airtight flowing environment, a COP layer was uniformly formed. The hollow fibers attain high performance and deliver multi-wavelength laser light from the infrared to the visible simultaneously. The method was successfully applied to the fabrication of practical hollow fibers with 2 m length for the near and mid-infrared lasers.     

Rugged distal tips for CO2 laser medicine

Low-loss and rugged distal tips for CO₂ laser have been proposed and fabricated based on a commercially available stainless steel (St) pipe. A method of smoothening the inner surface of the St pipe with a rough inner surface is put forward. Fabrication parameters, transmission properties, and mechanical strength of the cyclic olefin polymer-coated silver hollow St distal tip are experimentally discussed.     

Optimal design for hollow fiber inner-coated by dielectric layers with surface roughness

We report the optimal design for hollow fiber inner-coated with metallic and multidielectric layers by using ray-optics theory. Transmission characteristics of the multilayer hollow fiber are more dependent on the film surface roughness in the IR region. Comparisons of fibers with smooth and rough films are made and discussed in detail. The optimal design for film thickness, inner radius, and the number of layers and refractive indices is presented. The calculation results are important for structure design, material selection, and fabrication when considering imperfections in film-coating techniques. Multilayer fibers are fabricated based on the calculation and experimental results agree with the theoretical ones.     

Reaction dynamics of excited 2-(3-benzoylphenyl)propionic acid (ketoprofen) with histidine

Photoreaction dynamics of 2-(3-benzoylphenyl)propionic acid (ketoprofen, KP), one of nonsteroidal anti-inflammatory drugs, with histidine in a phosphate buffer solution (pH 7.4) was investigated with the laser flash photolysis. The deprotonated form of KP (KP(-)) was decarboxylated via UV laser excitation to form a carbanion. It was found that histidine accelerates the protonation reaction of the carbanion to 3-ethylbenzophenone ketyl biradical (3-EBPH) for the first time. The experimental results of the photoreaction of KP with alanine as well as the photoreaction of KP with 4-methylimidazole (a part of the side chain of histidine) in methanol, clearly showed that the protonated form of histidine is a key species for the protonation reaction of the carbanion. These series of the initial reactions should result in the occurrence of photosensitization in vivo. The reaction mechanism was discussed in detail.     

Asymmetric borane reduction of ketones promoted by menthopyrazole‐zncl2 complex

The enantioselective reduction of ketones was accomplished by borane in the presence of pyrazole derivatives, particularly 2‐methoxymethyl‐3‐phenyl‐1‐menthopyrazole (8). The catalysis of zinc chloride makes it possible to lower the reaction temperature below 0 °C, and to promote enantioselectivity.