This study describes the facile synthesis of platinum nanoparticle-containing porous carbons (Pt/C) by carbonization of freeze-dried agarose gels containing potassium tetrachloroplatinate under a nitrogen atmosphere at 800 °C. By adjusting the ratio between agarose and platinate in the freeze-dried gels, the Pt content in the final Pt/C products could be systematically varied from 0–10 wt.%. Transmission electron microscopy, inductively coupled plasma atomic emission spectrometry, X-ray photoelectron spectroscopy, Raman spectroscopy, and nitrogen physisorption measurements revealed that the Pt/C materials obtained by this method possess high surface areas (350–500 m2 g−1), narrow Pt nanoparticle size distributions (6 ± 3 nm) and nanocrystalline graphite –like carbon character. By immobilization of glucose oxidase on the surface of a 4 wt.% Pt/C electrocatalyst prepared by this route, a very sensitive amperometric glucose biosensor was obtained (response time <2 min, sensitivity 1.9 mA M−1; and a linear response with glucose concentration up to 10 mM). The simplicity and versatility of the described synthetic method suggests its application to the preparation of carbon supported noble metal catalysts including palladium/C and gold/C.
This study describes the facile synthesis of platinum nanoparticle-containing porous carbons (Pt/C) by carbonization of freeze-dried agarose gels containing potassium tetrachloroplatinate. The Pt/C materials exhibited excellent electrocatalytic activities, as demonstrated by their successful integration into amperometric glucose biosensor
Stereoselective construction of the tricyclic core of yonarolide (1), a marine norditerpenoid, was achieved. This synthetic route includes a Diels-Alder reaction and an intramolecular aldol condensation. It also involves efficient epimerization through a retro-Michael reaction-Michael addition and will be applicable to the total synthesis of 1. 相似文献
A10(PO4)6(OH)2 (A = Ca and Sr)-supported Pt catalysts were prepared and their catalytic activity in NO reduction were investigated. The Sr10(PO4)6(OH)2-supported catalyst had high catalytic activity in the C3H6?CNO?CO2 reaction; the activity was higher than that of the ??-Al2O3-supported catalyst at 300 °C. The basicity of the apatite supports would affect the chemical state of Pt on catalyst, resulting in promotion of NO reduction. 相似文献
2′-Deoxyguanosine (dG) suffers from oxidation by reactive oxygen species (ROS) to form 8-oxo-2′-deoxyguanosine (8-oxo-dG), which is regarded as a marker of oxidative stress in the cells. In our continuous study for the recognition molecule of 8-oxo-dG, 8-oxoGclamp and its derivatives have been identified as the selective fluorescent probe. However, it is an obstacle for further application that dG also forms a complex with 8-oxoGclamp, resulting in fluorescence quenching in less polar solvents. Quenching of the fluorescence of 8-oxoGclamp is thought to involve photo-induced electron transfer in the complex. It was hypothesized that the energy level of the excited state of 8-oxoGclamp and the HOMO energy of dG are the preliminary determinant of the quenching efficiency. Thus, fluorescence properties of the substituted derivatives at the 7-position of the 1,3-diazaphenoxazine part of 8-oxoGclamp were investigated. Among the new derivatives, fluorescence of the 7-phenyl substituted 8-oxoGclamp was not quenched by dG even in the stable complex, exhibiting the highest selectivity for 8-oxo-dG. 相似文献
We have developed a new carbon film electrode material with thornlike surface nanostructures to realize efficient direct electron transfer (DET) with enzymes, which is very important for various enzyme biosensors and for anodes or cathodes used in biofuel cells. The nanostructures were fabricated using UV/ozone treatment without a mask, and the obtained nanostructures were typically 2-3.5 nm high as confirmed by atomic force microscopy measurements. X-ray photoelectron spectroscopy and transmission electron microscopy revealed that these nanostructures could be formed by employing significantly different etching rates depending on nanometer-order differences in the local sp(3) content of the nanocarbon film, which we fabricated with the electron cyclotron resonance sputtering method. These structures could not be realized using other carbon films such as boron-doped diamond, glassy carbon, pyrolyzed polymers based on spin-coated polyimide or vacuum-deposited phthalocyanine films, or diamond-like carbon films because those carbon films have relatively homogeneous structures or micrometer-order crystalline structures. With physically adsorbed bilirubin oxidase on the nanostructured carbon surface, the DET catalytic current amplification was 30 times greater than that obtained with the original carbon film with a flat surface. This efficient DET of an enzyme could not be achieved by changing the hydrophilicity of the flat carbon surface, suggesting that DET was accelerated by the formation of nanostructures with a hydrophilic surface. Efficient DET was also observed using cytochrome c. 相似文献
Catalytic conversion of unreactive sp(3) C-O bonds in alkyl ethers to C-C bonds is described. Alkyl ethers bearing 2- or 4-pyridyl groups were coupled with triarylboroxines in the presence of a ruthenium catalyst. Triarylboroxines bearing a variety of functional groups including electron-withdrawing and -donating groups can be used for the reaction. No additional base was required for the coupling with the organoboron reagents, and base-sensitive groups can be tolerated. The reaction is considered to proceed via dehydroalkoxylation followed by addition of triarylboroxines to form C-C bonds. 相似文献
In 3-ethoxycarbonyl-2,4-dienal compounds, a thermal [1,5]-H shift of aldehyde hydrogen easily proceeded to produce the corresponding vinyl ketenes due to the remarkable substituent effect caused by the C3 ester group. The produced ketenes were captured by an alcohol and olefins to afford the corresponding esters and four-membered ring compounds, respectively. 相似文献
This review article summarizes our recent researches for molecular design of polyoxometalates (POMs) and their related compounds
for environmentally-friendly functional group transformations. The divacant POM [γ-SiW10O34(H2O)2]4− exhibits high catalytic performance for mono-oxygenation-type reactions including epoxidation of olefins and allylic alcohols,
sulfoxidation, and hydroxylation of organosilanes with H2O2. We have successfully synthesized several POM-based molecular catalysts (metal-substituted POMs) with controlled active sites
by the introduction of metal species into the divacant POM as a “structural motif”. These molecular catalysts can efficiently
activate H2O2 (vanadium-substituted POM for epoxidation) and alkynes (copper-substituted POM for click reaction and oxidative homocoupling
of alkynes). The aluminum-substituted POM exhibits Lewis acidic catalysis for diastereoselective cyclization of (+)-citronellal
to (−)-isopulegol. In addition, we have developed POM-based “molecular heterogeneous catalysts” by the “solidification” and
“immobilization” of catalytically active POMs. 相似文献
The quantitative excited energy transfer reaction between cationic porphyrins on an anionic clay surface was successfully achieved. The efficiency reached up to ca. 100% owing to the "Size-Matching Rule" as described in the text. It was revealed that the important factors for the efficient energy transfer reaction are (i) suppression of the self-quenching between adjacent dyes, and (ii) suppression of the segregated adsorption structure of two kinds of dyes on the clay surface. By examining many different kinds of porphyrins, we found that tetrakis(1-methylpyridinium-3-yl) porphyrin (m-TMPyP) and tetrakis(1-methylpyridinium-4-yl) porphyrin (p-TMPyP) are the suitable porphyrins to accomplish a quantitative energy transfer reaction. These findings indicate that the clay/porphyrin complexes are promising and prospective candidates to be used for construction of an efficient artificial light-harvesting system. 相似文献
The diiron carbonyl cluster is held by a native CXXC motif, which includes Cys14 and Cys17, in the cytochrome c sequence. It is found that the diiron carbonyl complex works well as a catalyst for H(2) evolution. It has a TON of ~80 over 2 h at pH 4.7 in the presence of a Ru-photosensitizer and ascorbate as a sacrificial reagent in aqueous media. 相似文献