掺Er光纤飞秒激光器载波包络位相偏移的探测

本文介绍了基于掺Er光纤飞秒激光器光学频率梳中光学部分的研制. 实验上采用重复频率为230 MHz的掺Er光纤飞秒激光器,通过放大、光谱展宽以及单臂f—2f系统,在优化及分析相关参数影响的基础上,获得了~30 dB信噪比f₀的输出,为光纤光学频率梳的建立奠定了基础. 关键词： 掺Er光纤激光器 光学频率计量 光纤光学频率梳 光谱展宽     

透射光栅的实验标定和衍射效率的理论模拟

透射光栅广泛应用于软X射线能谱测量.为了获得用于惯性约束聚变研究的透射光栅的各级衍射效率及其他参数,在北京同步辐射源上200—1600 eV能量范围内对其进行了标定,获得了透射光栅衍射效率的实验结果.扩展了透射光栅衍射效率的计算方法,提出了7边准梯形截面衍射效率计算模型.分析拟合了实验数据,理论结果与实验结果很好符合.得到了7边准梯形的透射光栅栅线截面结构. 关键词： 透射光栅 衍射效率 实验标定 光栅模型     

具有频率噪声的单模激光线性模型随机共振

将频率有涨落的周期信号输入单模激光增益模型,计算出输出光强的相关函数及功率谱,对信噪比随噪声强度和系统参数的变化进行了研究. 结果表明:信噪比随频率噪声强度的变化、抽运噪声强度的变化、量子噪声强度的变化均出现随机共振;信噪比随增益系数和损失系数的变化也出现随机共振. 关键词： 频率噪声 功率谱 随机共振     

Observable T7 lepton flavor symmetry at the Large Hadron Collider

More often than not, models of flavor symmetry rely on the use of nonrenormalizable operators (in the guise of flavons) to accomplish the phenomenologically successful tribimaximal mixing of neutrinos. We show instead how a simple renormalizable two-parameter neutrino mass model of tribimaximal mixing can be constructed with the non-Abelian discrete symmetry T(7) and the gauging of B-L. This is also achieved without the addition of auxiliary symmetries and particles present in almost all other proposals. Most importantly, it is verifiable at the Large Hadron Collider.     

Graphite nanosheets doped with Fe, Ni, and N, synthesized in one step, and their unique magnetic performance

Graphite nanosheets (GNs) doped with N, Fe, or Ni were synthesized by pyrolysis of metal tetrapyridinoporphyrazine (MPTpz, M=Fe²⁺, and Ni²⁺) and a mixture of MPTpzs in a chemical vapor deposition furnace. The products obtained were characterized by scanning and transmission electron microscopy, and X-ray photoelectron spectroscopy. The magnetic properties of the GNs obtained were investigated at room temperature using a vibrating sample magnetometer with an applied field of −10 000-10 000 Gs. The results show the GNs obtained are terrace-like and ultra-thin, with very high aspect ratio. Fe, Ni and N atoms have been doped to the GNs successfully. There are two types of N atom that are introduced into pure carbon systems: pyrinidic and graphitic N atoms. The GNs obtained exhibit ferromagnetic behavior at room temperature. Sample S1, obtained by pyrolysis of a mixture of MPTpzs (M=Fe²⁺ and Ni²⁺), have the highest coercivity force. The saturation magnetization (M_s), remanent magnetization (M_r), and coercivity (H_c) values of sample S1 are 24.51 emu g⁻¹, 3.95 emu g⁻¹, and 207.34 Gs, respectively.     

Reconstruction for limited-projection fluorescence molecular tomography based on projected restarted conjugate gradient normal residual

Limited-projection fluorescence molecular tomography (FMT) can greatly reduce the acquisition time, which is suitable for resolving fast biology processes in vivo but suffers from severe ill-posedness because of the reconstruction using only limited projections. To overcome the severe ill-posedness, we report a reconstruction method based on the projected restarted conjugate gradient normal residual. The reconstruction results of two phantom experiments demonstrate that the proposed method is feasible for limited-projection FMT.     

Zonal slope prediction for open-loop adaptive optics

We present what we believe to be the first results that obtained with the recursive least square zonal slope predictor working on an open-loop liquid-crystal adaptive optics system operating on astronomical implementation at visible and near infrared wavelength on a 1.23 m telescope. The system produces substantially better results than a direct open-loop correction based on previous measurement. A 27% relative gain in full-width at half-maximum and 30% relative gain in Strehl ratio are obtained.     

Diffraction inhibition in two-dimensional photonic crystals

We show the existence of flat equal-frequency contour across the entire first Brillouin zone in two-dimensional photonic crystals. Under this condition, light diffraction can be inhibited. Moreover, the beam can be highly localized between two neighboring rows of the defect-free photonic crystal. Such a finding may have novel applications in light beam manipulations and on-chip integrated photonic devices.     

Fabrication of fluorinated polyimide optical waveguides by micropen direct writing technology

A novel and cheap direct writing method based on the micropen has been developed to fabricate fluorinated polyimide stripe optical waveguides on Si/SiO₂ wafers. The overall design, starting material, micropen direct writing system and fabrication processes of the stripe optical waveguides are presented. The effects of the key direct writing parameters, such as the tip-to-substrate distance, extrusive gas pressure, writing speed and viscosity of the polyamic acid, on the dimension and morphology of the stripe optical waveguides are discussed in detail. After deposition by the micropen system and baking process, the fluorinated polyimide stripe optical waveguides with good morphology and surface quality can be fabricated using the optimal parameters. The propagation losses at the wavelength of 1.55 μm are in the range of 1.4-3.5 dB cm⁻¹ as characterized by different length combinations of the strip optical waveguides.     

External cavity diode laser with kilohertz linewidth by a monolithic folded Fabry-Perot cavity optical feedback

We present a extended-cavity diode laser (ECDL) with kilohertz linewidth by optical feedback from a monolithic folded Fabry-Perot cavity (MFC). In our experiments, an MFC replaces the retroreflecting mirror in the traditional ECDL configuration. Beat-note measurements between this MFC-ECDL and a narrow-linewidth reference laser are performed and demonstrate that the linewidth of this MFC-ECDL is about 6.8 kHz. Phase locking of this MFC-ECDL to the reference laser is achieved with a unity gain as small as 10.2 kHz.