物理教学中让学生学会提出问题

分析了当前学生缺乏提出问题能力的原因，从教师的教学实际出发，借鉴成功教育的理念，通过培养学生在探究学习中敢问、能问，直到学生会问，逐步提高学生的学习、探究和创新的能力．     

2×n阶网络侧端等效电阻的另一种公式

再次研究了2×n阶梯形网络的侧端等效电阻,通过网络分析构建差分方程模型,给出了2×n阶梯形网络侧端等效电阻的另外一个普适规律,并通过具体的特例进行了比较与验证.     

纳米材料用于吸收电磁波的物理机制

本文从物理学的角度分析吸波材料与电磁波作用的影响因素和纳米材料在吸波应用上的微观机制，随着纳米材料和纳米科技的深入发展，纳米吸波材料将以更优异的性能广泛应用于军事装备和民用电磁波防护上．     

What is the highest Tc for phonon-mediated superconductivity?

We suggest that the high-temperature superconductivity can be attributed to the director-roles of the van Hove singularity between an electron-electron interaction and an electron-phonon interaction. The difference between the critical temperature and the pairing temperature is presented, and the Fermi arc, the d-wave symmetry and the poor conductivity, etc., are discussed. In particular, the non-s-wave symmetry is predicted to have the highest T _c for superconductors.      

应用键轨道连接矩阵方法预测烷烃折光率.

应用键轨道连接矩阵方法提取结构参数PX1CC和PX1CH， 并用于建立预测烷烃折光率的QSPR模型．该模型不仅预测精度较高(其误差仅为0.0048)，而且模型中采用的参数表达了直接与分子的折光能力相关的结构信息(即烷烃分子中电子被极化的能力)．此参数提取简单，既具备拓扑指数简单、易算，物理意义明确．     

Adaptive synchronization and lag synchronization of uncertain dynamical system with time delay based on parameter identification

In this paper, the adaptive synchronization and lag synchronization are considered for uncertain dynamical system with time delay based on parameter identification and a novel control method is then further given using the Lyapunov functional method. With this new and effective method, parameter identification and lag synchronization can be achieved simultaneously. Simulation results are given to justify the theoretical analysis in this paper.     

Influence of aramid fiber moisture regain during atmospheric plasma treatment on aging of treatment effects on surface wettability and bonding strength to epoxy

One of the main differences between a low-pressure plasma treatment and an atmospheric pressure plasma treatment is that in atmosphere, the substrate material may absorb significant amount of water which may potentially influence the plasma treatment effects. This paper investigates how the moisture absorbed by aramid fibers during the atmospheric pressure plasma treatment influences the aging behavior of the modified surfaces. Kevlar 49 fibers with different moisture regains (MR) (0.5, 3.5 and 5.5%, respectively) are treated with atmospheric pressure plasma jet (APPJ) with helium as the carrier gas and oxygen as the treatment gas. Surface wettability and chemical compositions, and interfacial shear strengths (IFSS) to epoxy for the aramid fibers in all groups are determined using water contact angle measurements, X-ray photoelectron spectroscopy (XPS), and micro-bond pull out tests, respectively. Immediately after the plasma treatment, the treated fibers have substantially lower water contact angles, higher surface oxygen and nitrogen contents, and larger IFSS to epoxy than those of the control group. At the end of 30 day aging period, the fibers treated with 5.5% moisture regain had a lower water contact angle and more polar groups on the fiber surface, leading to 75% improvement of IFSS over the control fibers, while those for the 0.5 and 3.5% moisture regain groups were only 30%.     

Use of elemental size distributions in identifying particle formation modes

The chemical composition of particles generated during pulverized coal combustion is the consequence of their formation processes. This work aims to use the size resolved elemental composition of coal-derived particles to identify their formation modes. A size-classified bituminous coal is burnt in a laboratory drop tube furnace at 1150, 1250, and 1350 °C, respectively. The elemental composition of the size-segregated particles from coal combustion is analyzed and the total mass fraction size distributions of Si and Al are obtained. Three particle formation modes are observed in these distribution profiles. The coarse mode has the highest value of the total mass fraction of Si and Al while the ultrafine mode has the lowest one. The total mass fraction of Si and Al in these two modes is nearly independent of particle size. It is believed that the coarse mode is formed by the mineral coalescence mechanism and the ultrafine mode by the vaporization–condensation mechanism. The difference in the total mass fraction of Si and Al between the central mode and the other two indicates that the central mode is formed by different mechanisms. Based on the observation that the total mass fraction of Si and Al in this mode increases with increasing particle size, heterogeneous condensation of vaporized species on existing fine residual ash particles is proposed to account for the formation of these particles. The study of the elemental composition of the three modes represented in five categories verifies the proposed formation mechanisms for them to some extent.     

Construction of the elliptic Gaudin system based on Lie algebra

Gaudin model is a very important integrable model in both quantum field theory and condensed matter physics. The integrability of Gaudin models is related to classical r-matrices of simple Lie algebras and semi-simple Lie algebra. Since most of the constructions of Gaudin models works concerned mainly on rational and trigonometric Gaudin algebras or just in a particular Lie algebra as an alternative to the matrix entry calculations often presented, in this paper we give our calculations in terms of a basis of the typical Lie algebra, A _n , B _n , C _n , D _n , and we calculate a classical r-matrix for the elliptic Gaudin system with spin.