Properties of MgB2 bulks after combined doping with Fe and C by adding Iron(II) lactate (C6H10FeO6)

Bulk MgB₂ doped with C and Fe was prepared by using the solid state sintering method with C₆H₁₀FeO₆ as dopant. The phase composition, microstructure, and superconducting properties were studied. X-ray diffraction (XRD) shows the presence of iron after the doping. The addition of C₆H₁₀FeO₆ increases the a- and c-axis parameters of MgB₂, as evidenced by the shifting of the (100) and (002) peaks to a lower angle on the XRD patterns. Fe atoms were distributed uniformly, as shown by the field emission scanning electron microscope images, while the magnetization of the sample was dominated by the signals from the MgB₂ superconductor, although the iron-containing materials also contributed a minor amount of magnetization. The residual resistivity ratio was decreased as the C₆H₁₀FeO₆ doping level increased. The critical temperature also decreased with increased doping level, as did the critical current density, J_c. The doping also caused decreases in the irreversibility field, H_irr, and the upper critical field, H_c2. The decrease in H_c2 and H_irr, together with the harmful effects from impurity phases such as MgO is the reason for the decrease in J_c.     

Molecular modeling for the interaction between proteasome beta 5 subunit and organotin compounds

It has been reported that organotins can inhibit the proteasomal chymotrypsin-like activity and induce cell death, but the interaction mode of organotins with proteasome has not been well defined. In this study, the IC₅₀ of butyltins and phenyltins against the proteasomal activity and the nature of their inhibition were investigated. It was found that both mono- and di-organotins were weak, reversible inhibitors against the proteasome, while tributyltin and triphenyltin were potent, irreversible proteasome inhibitors. In silico studies using the reversible organotin proteasome inhibitors demonstrated a tight correlation of the estimated proteasomal inhibition constants (Ki) with the experimental IC₅₀ values for proteasome inhibition. Furthermore, the Sn atom in TBT and TPT was found susceptible to form a coordinate bond with Thr 1 O^γ of the β5 subunit, which may account for the irreversible proteasome inhibition. The computational docking approach well predicted the inhibition nature of organotins toward the proteasomal chymotrypsin-like activity. This predictive model might aid in understanding the cytotoxic behavior of similar organometallic compounds.     

New implementations of MRCI in semiempirical frameworks

Multireference configuration interaction with single and double excitations (MRCISD) as well as its analytic CI gradients has been implemented in the semiempirical framework. The hole‐particle symmetry and a mixed driven model for computing coupling coefficients have been used in the new code that allows us to perform MRCI and gradient calculations with higher efficiency and less storage requirements. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2010     

Encapsulation of polyaniline in 3-D interconnected mesopores of silica KIT-6

Composite material PANI/KIT-6, with polyaniline (PANI) chains encapsulated in the 3-D interconnected pore channels of mesoporous silica, KIT-6, has been synthesized via a gas-phase method. The composite formation and the presence of PANI inside the pore channels of KIT-6 were evidenced by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), small-angle X-ray scatter (SAXS), transmission electron microscopy (TEM), and N₂ adsorption–desorption isotherms. The PANI/KIT-6 composite showed good electrical conductivity (2.4 × 10^?3 S/cm) due to the formation of 3-D networks of PANI inside the 3-D interconnected channels of KIT-6. The resistance of PANI/KIT-6 composite at different relative humidities (RH) was investigated. An essentially linear relationship between the relative resistance of the composite and the relative humidity of the environment was found from 11.3% to 97.3% RH.     

The nonlinear refraction sign turned to reverse by intercalating cresyl violent dye into layered titanate nanosheets

Solid-state dye-doped materials are an attractive alternative to conventional liquid dye solution. In this study, the spectral characteristics of dye cresyl violet before and after intercalating into layered titanate nanosheets and forming a nanohybrid thin film were investigated by measuring absorption and fluorescence spectra. In addition, their nonlinear optical properties were studied using single beam z-scan technique under irradiation of low power continuous wave (CW) produced by DPSS laser with a wavelength of 532 nm. The nonlinear studying results reveal that the dye cresyl violet in solution has a negative nonlinear refractive index, but it reverses to positive after the dye is intercalated into layered titanate nanosheets with a negative nonlinear refractive index forming CV/HTO nanohybrid thin film. This method can provide a way to turn to reverse nonlinear refraction sign of the materials.     

Single-bunch emittance dilution in the perfect ILC main linac

In the ILC(International Linear Collider)main linac, low emittance preservation is the most important issue for beam dynamics study. As the main sources of emittance dilution, the dispersive and wakefield effects were studied in this paper. The theoretical calculations and numerical simulations of these two effects on single-bunch emittance dilution, without any misalignment errors, are presented in detail.     

赤铁矿和三羟铝石吸附Cu~(2+)的红外光谱研究

应用红外光谱法,研究了不同pH值和Cu2+浓度条件下,合成赤铁矿和三羟铝石吸附Cu2+后表面羟基结构及其特征吸收峰的变化。结果表明:(1)随Cu2+浓度增加,赤铁矿表面H—O—H和OH的变形振动参与了吸附反应,Cu2+强烈地缔结在Fe—O上,形成了Fe—O—(Cu)结构。(2)酸性条件下,H+破坏了赤铁矿表面的O—H结构,NO3-促使弱峰1 131 cm-1的产生。随pH值增大,赤铁矿表面OH-逐渐由伸缩振动转变为变形振动,Fe—OH和Fe3+—O2-结构不断发生改变。(3)三羟铝石对Cu2+的吸附发生在高波位,随Cu2+浓度增大,其表面游离羟基的O—H弯曲振动、水分子的OH-伸缩振动和H—O—H弯曲振动均参与了吸附反应,Al—O基中的Al3+渐被Cu2+取代从而加强了较低波位的振动强度。(4)随pH值增加,三羟铝石Al—OH的弯曲振动和Al—O的伸缩振动逐渐发生着改变,表明吸附Cu2+后,在其表面形成了AlOCu+与AlOCuOH结构。     

A simple solution-immersion process for the fabrication of superhydrophobic cupric stearate surface with easy repairable property

The present work reports a simple and time-saving method to fabricate cupric stearate film on zinc substrate by a solution-immersion process. Superhydrophobic surfaces are conventionally prepared employing two steps: roughening a surface and lowering its surface energy. The fabrication of superhydrophobic cupric stearate surface is reported using a one-step process by immersing a zinc plate coated with copper into the stearic acid solution, simplifying the complexity of two different steps involved in the conventional methods. The surface of the zinc plate coated with copper is found to be covered with low surface energy cupric stearate film providing the water contact angle of 160 ± 1° with the rolling off properties. In addition, the damaged superhydrophobic surface can restore superhydrophobicity property by immersing the surface into the stearic acid solution again.     

Immobilized anthraquinone for redox mediation of horseradish peroxidase for hydrogen peroxide sensing

The detection of hydrogen peroxide is detailed using horseradish peroxidase and anthraquinone. Both species are immobilized on a glassy carbon electrode substrate. This dual immobilization gives rise to lower detection limits compared with the situation when either of the species is immobilized. Detection limits of 40 nM are reported within physiologically-relevant media.     

Enhanced Crude Oil Sorption by Modified Plant Materials in Oilfield Wastewater Treatment

The treatment of oilfield wastewater with high crude oil content and complex composition is a problem requiring considerable attention. In order to effectively remove crude oil contained in wastewater, in this work, rice straw, as an oil-absorbing material, was modified and used as a sorbent for crude oil. Rice straw was modified with alkali and cetyltrimethylammonium chloride (CTAC) by simple substitution reaction. The adsorption capacity of modified rice straw for oil was evaluated. The results illustrate that the adsorption rate of rice straw for crude oil was increased from 0.83 to 8.49 g/g, with the optimal conditions of 18% NaOH reacted for 90 min at 50 °C and 2% CTAC reacted for 60 min at 20 °C. The proposed modification method could be used for different materials to enhance the adsorption rate. The results of the contact angle test show that the modified straw changed from hydrophilic to hydrophobic, which may be the main reason for the improvement in the oil absorption rate. Finally, the surface structure of rice straw was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and N₂ adsorption–desorption isotherms, which further confirmed the hydrophobicity of the modified rice straw.