Adsorption of a polymeric siloxane surfactant on carbon black particles dispersed in mixtures of water with polar organic solvents

The adsorption of a rake-type polymeric siloxane surfactant (polydimethylsiloxane-graft-polyether copolymer) on carbon black (CB) particles dispersed in mixtures of water with polar organic solvents (ethanol, formamide, or glycerol) has been investigated. The adsorption obeys the Langmuir isotherm at low surfactant concentrations (below the critical micelle concentration, CMC). At these conditions, the average surface area occupied by one siloxane surfactant follows the sequence water+glycerol mixture >plain water >water+ethanol mixture. At higher surfactant concentrations in the solution in contact with the particles, a sharp increase in the adsorbed amount is observed. The adsorbed layer thickness has been determined by dynamic light scattering. Below the CMC the adsorbed layer thickness is less than 10 nm. Above the CMC, the adsorbed layer thickness increases to 20-30 nm, a length scale comparable to the diameter of the siloxane surfactant micelles in aqueous solution. This fact, together with SANS data that we have obtained in the absence of added polar organic solvent, indicates that the structure of the adsorbed layer is similar to that of micelles. The findings presented here are relevant to waterborne coatings and ink formulations, where polymeric surfactants are used in conjunction with polar organic solvents.     

Ultra-high capacity liquid chromatography chip/quadrupole time-of-flight mass spectrometry for pharmaceutical analysis

Nanoflow liquid chromatography/mass spectrometry (nano-LC/MS) has attracted increasing interest in virtue of high sensitivity, low sample consumption, and minimal matrix effect. In this work a HPLC-Chip/quadrupole time-of-flight (Q-TOF) MS device with a new ultra-high capacity small molecule chip (UHC-Chip) which features a 500 nL enrichment column and a 150 mm × 75 μm analytical column, was evaluated with a drug mixture covering a wide range of polarities. Excellent chromatographic precision with 0.1-0.5% RSD for retention time and 1.7-9.0% RSD for peak area, low limit of detection, good chip-to-chip reproducibility and linearity were obtained by using this UHC-Chip. Compared with the standard HPLC-Chip with 40 nL trapping column, the UHC-Chip showed higher enrichment capability and hence gave a higher response in signal detection. Additionally, 4-30 times increase in sensitivity was obtained compared with conventional LC/MS, which indicated that UHC-Chip/MS was a valuable tool for the quantitative analysis of low level impurities and degradation products in pharmaceuticals. Moreover, satisfactory results obtained from trace drug analysis of serum samples further proved its practicality and potential for use in drug testing and development.     

Novel molecularly imprinted polymer using 1-(α-methyl acrylate)-3-methylimidazolium bromide as functional monomer for simultaneous extraction and determination of water-soluble acid dyes in wastewater and soft drink by solid phase extraction and high performance liquid chromatography

Novel water-compatible molecularly imprinted polymers were synthesized in methanol-water systems with Tratarzine as template and 1-(α-methyl acrylate)-3-methylimidazolium bromide (1-MA-3MI-Br) as functional monomer, which has π-π hydrophobic, hydrogen-bonding and electrostatic interactions with template molecule. 1-MA-3MI-Br molecularly imprinted polymers (1-MA-3MI-Br-MIPs) were used as selective sorbents for the solid-phase extraction (SPE) of water-soluble acid dyes from wastewater and soft drink. The good linearity of the method was obtained in a range of 5.0-2000 μg/L with the correlation coefficient of > 0.999. The detection limits were in a range of 0.13-0.51 μg/L for the water-soluble acid dyes in wastewater and 0.095-0.84 μg/L for those in soft drink. The mean recoveries for the acid dyes are from 89.1% to 101.0% in spiked wastewater and 91.0-101.3% in spiked soft drink. Compared with strongly anion exchange solid phase extraction (SAX-SPE), mixture anion exchange solid phase extraction (MAX-SPE), and 1-MA-3MI-Br non-imprinted solid phase extraction (1-MA-3MI-Br-NISPE), almost all of the matrix interferences were removed by 1-MA-3MI-Br-MISPE, exhibiting higher selectivity, recovery and enrichment ability for the acid dyes and better baselines in the results of HPLC analysis.     

Natural abundance solid-state 67Zn NMR characterization of microporous zinc phosphites and zinc phosphates at ultrahigh magnetic field

Zinc-phosphite and -phosphate based microporous materials are crystalline open framework materials with potential industrial applications. Although (31)P MAS NMR has been used for characterization of these materials, the local environments around zinc centres have never been directly probed by solid-state NMR due to the many unfavourable NMR characteristics of (67)Zn. In this work, we have characterized the local structure around the Zn centres in several representative microporous zinc phosphites and zinc phosphates by acquiring natural abundance (67)Zn solid-state NMR spectra at ultrahigh magnetic field of 21.1 T. The observed line-shapes are mainly determined by the second order quadrupolar interaction. The NMR tensor parameters were extracted from the spectra and are related to the local geometry around the Zn centre. Computational study of the electric field gradient (EFG) tensor at Zn was performed using hybrid density functional theory (DFT) calculations at B3LYP level of theory on model clusters. The calculations using Projector Augmented-Wave (PAW) method were also carried out with the CASTEP code wherever it was possible. The work has shown that it is possible to study Zn environments in porous materials which often have very low Zn concentration by natural abundance (67)Zn SSNMR at very high magnetic fields.     

甲烷氧化偶联纳米SrTiO3催化剂的原位ESR和TPSR表征

采用溶胶-凝胶法制备了纳米钙钛矿型复合氧化物SrTiO3催化剂,并用X射线粉末衍射、透射电子显微镜、原位电子自旋共振和程序升温表面反应等技术对催化剂进行了表征,测定了催化剂对甲烷氧化偶联(OCM)反应的催化性能.结果表明,与相同组成的常规SrTiO3催化剂相比,纳米SrTiO3催化剂具有较好的低温(～650℃)催化性能.通过增大Sr/Ti比可进一步优化纳米SrTiO3的催化性能.纳米SrTiO3催化剂表面的吸附氧物种和F中心均具有活化及催化甲烷分子生成C2烃产物的活性,但吸附氧物种易使OCM反应中间体和产物深度氧化,而F中心具有低温活化甲烷分子及高选择性生成C2烃产物的特性.纳米氧化物粒子因表面原子配位不饱和(配位数低),其表面存在较多的F中心。     

Characterization of ZnE (E = S, Se, or Te) materials synthesized using silylated chalcogen reagents in mesoporous MCM-41

The binary materials ZnS, ZnSe, and ZnTe have been successfully prepared within the mesoporous framework of MCM-41 at room temperature through the use of silylated chalcogen reagents. Postsynthesis grafting of ethylenediamine facilitates the complexation of anhydrous zinc acetate to the pore surface via a ligand exchange process between monodentate 3,5-lutidine ligands and the anchored chelating moiety. Coordinated zinc acetate readily reacts with E(SiMe(3))(2) (E = S, Se, or Te), thereby encapsulating zinc chalcogenides in the mesoporous channels. ZnE-MCM-41 materials have been characterized by EDX analysis, nitrogen sorption analysis, and Raman, UV-vis, and solid-state NMR spectroscopy. The observed blue shift in the absorption maximum is in agreement with the expected quantum confinement of these materials given the nanometer dimensions of the mesoporous architecture of the silicate host.     

Characterization of Zn‐Containing Metal–Organic Frameworks by Solid‐State 67Zn NMR Spectroscopy and Computational Modeling

Metal–organic frameworks (MOFs) are an extremely important class of porous materials with many applications. The metal centers in many important MOFs are zinc cations. However, their Zn environments have not been characterized directly by ⁶⁷Zn solid‐state NMR (SSNMR) spectroscopy. This is because ⁶⁷Zn (I=5/2) is unreceptive with many unfavorable NMR characteristics, leading to very low sensitivity. In this work, we report, for the first time, a ⁶⁷Zn natural abundance SSNMR spectroscopic study of several representative zeolitic imidazolate frameworks (ZIFs) and MOFs at an ultrahigh magnetic field of 21.1 T. Our work demonstrates that ⁶⁷Zn magic‐angle spinning (MAS) NMR spectra are highly sensitive to the local Zn environment and can differentiate non‐equivalent Zn sites. The ⁶⁷Zn NMR parameters can be predicted by theoretical calculations. Through the study of MOF‐5 desolvation, we show that with the aid of computational modeling, ⁶⁷Zn NMR spectroscopy can provide valuable structural information on the MOF systems with structures that are not well described. Using ZIF‐8 as an example, we further demonstrate that ⁶⁷Zn NMR spectroscopy is highly sensitive to the guest molecules present inside the cavities. Our work also shows that a combination of ⁶⁷Zn NMR data and molecular dynamics simulation can reveal detailed information on the distribution and the dynamics of the guest species. The present work establishes ⁶⁷Zn SSNMR spectroscopy as a new tool complementary to X‐ray diffraction for solving outstanding structural problems and for determining the structures of many new MOFs yet to come.     

Tetramethylnorbornadiene, a versatile alkene for cyclopentenone synthesis through intermolecular Pauson-Khand reactions

1,2,3,4-Tetramethyl-bicyclo[2.2.1]hepta-2,5-diene (TMNBD, for tetramethylnorbornadiene) has been prepared and used successfully as an acetylene equivalent in the synthesis of substituted cyclopentenones. TMNBD is easily accessible on a multigram scale and displays excellent reactivity toward the intermolecular Pauson-Khand reaction. Conjugate additions on the resulting tricyclic compounds proceed with exquisite diastereoselectivity. The retro-Diels-Alder reaction of these TMNBD derivatives occurs under much smoother conditions than those required for its norbornadiene homologues.