Effect of nucleating agent on the structure and properties of polypropylene/poly(ethylene-octene) blends

The effect of the sorbital nucleating agent on properties of the ethylene-octene copolymer (POE) toughened polypropylene (PP) was studied. The results show that the addition of POE increases notched Izod and Charpy impact strength significantly but impair the tensile strength and flexural modulus. As a nucleating agent (1,3,2,4-di(p-methylbenzylidene) sorbitol, DM) was added, the toughness and stiffness of toughed PP increased simultaneously at the same content of POE. This result shows that the toughness and stiffness of toughed PP are in balance. Polarized light microscopy analysis shows that with the addition of POE and nucleating agent, only a low level of PP spherulites were observed.     

Calculation of Gurney parameters for aqueous tetraalkylammonium halides based on Friedman's cosphere-overlap model

Recalculations of the Gurney free-energy parameters A_ij based on the cosphereoverlap model of Friedman and co-workers have been made using more recent experimental data. Our procedure for calculation seems to be more systematic than those previously reported. The excess energy, entropy, and volume parameters (E_ij, TS_ij, and V_ij) were also recalculated for some aqueous tetraalkylammonium halides. In addition, the excess-heat-capacity parameters C_ij are also reported here for the first time. These data are discussed briefly in terms of the structural implications.     

Thermotropic copolyamides from triethyleneglycol bis (4-carboxyphenyl) ether,aromatic diamines,and p-aminobenzoic acid

It is proposed that depression of the transition temperatures, especially the melting point (T_m), can be achieved by the introduction of a different amide bond structure into the copolyamides of dicarboxylic acids and diamines by copolymerization of aminocarboxylic acids, such as p-aminobenzoic acid. The effect was examined by the amount and distribution of the structure in the copolylamindes. Copolycondensations of PEG₃, p-aminobenzoic acid, and diamines with different chain lengths showed that the structural change of the amide bond in the copolymers, especially its distribution, was more important than its total amount in them. Several types of aminocarboxylic acids were briefly examined to study the effect. © 1994 John Wiley & Sons, Inc.     

Encrypting Chemical Reactivity in Protein Sequences toward Information‐Coded Reactions†

Controlling chemical reactivity has been the central theme in chemistry. Herein, we review the recent progress on the development of genetically encoded protein coupling reactions and their potential applications. The chemical reactivity is encoded in the protein sequences. The information is read out by folding and molecular recognition between two reactive components and subsequently translated into chemical bonding via autocatalysis. It has emerged as a unique way to tune the chemical reactivity and is regarded as one type of information‐coded reactions. Not only has it received many applications such as protein topology engineering, bioconjugation, biomaterials and synthetic biology, but also its principle may be extended beyond protein chemistry to enable new modes of supramolecular interactions that promote chemical bonding and that are simultaneously reinforced by covalent bonds.     

基于核酸探针的光学传感方法和细胞成像研究

许多疾病的特征在于各种生物分子表现出的异常活性,这些物质通常在细胞内外显示过表达现象,因此对其灵敏靶向识别可以提供诊断和治疗效用。由于基因诊疗和化学传感技术的发展,用于灵敏检测细胞内外生物化学物质的核酸探针突显优势。核酸探针可以在稳定进入细胞的同时,特异性地结合目标物质,通过光学方法检测或通过成像技术标识出来。本文综述了采用光学传感方法和成像技术,基于核酸探针检测生物分子的新进展。根据检测对象进行分类,概括分析了几个代表性体系:核酸序列、蛋白质和酶、化学物质和物理化学条件,并详细阐述其关键设计原理、灵敏度及样品检测等结果,同时指出了各类核酸探针的优缺点。     

高效液相色谱与原子荧光光谱联用分析汞化合物形态的研究

建立了高效液相色谱与原子荧光光谱联用测定汞化合物形态的分析方法。实验对淋洗液组分浓度、氧化剂和还原剂浓度、载气流速及紫外消解管长度等操作条件进行了优化,获得了令人满意的分析结果。在优化的分离检测条件下,20μg/L的汞化合物标准溶液平行7次进样分析,甲基汞、无机汞和乙基汞的色谱峰高的相对标准偏差(RSD)分别为2.0%、2.9%和2.4%;3种汞化合物的线性范围为10~1000μg/L,25μL进样检出限分别为3、2和4μg/L。用建立的方法测定了脉红螺样品中甲基汞的含量,甲基汞和乙基汞的加标回收率分别为90%和92%。     

离子交换树脂纯化酪蛋白磷酸肽研究

通过单因素实验和正交试验确定了使用D-201型大孔强碱性阴离子交换树脂纯化酪蛋白磷酸肽(CPPs)的操作条件为：洗脱温度40℃、洗脱酸(HCI)浓度0．2mol／L、洗脱速度2．3ml／min、进样浓度2％(w／v)，进一步应用HPSEC技术分析考察了离子交换树脂纯化后含磷洗脱峰分子量分布情况，并计算了产品氮磷比与纯化收率．     

A New Silicate Clathrate Hydrate: An X-Ray Diffraction and Nuclear Magnetic Resonance Study of a System with Octameric Silicate Anions and Trivalent Cations

The first crystal structure is reported for a silicate clathrate hydrate involving a triply charged cation [C₁₈H₃₀N₃]³⁺ and an octameric cubic silicate cage. The structure is essentially a host/guest system, with the silicate cages linked into a framework by hydrogen bonding to water molecules. The space group is P with Z = 2, and the asymmetric unit includes a complete cation and half the anion, plus 21 water molecules (4 of which are in disordered positions). Solid-state (CPMAS) ²⁹Si and ¹³CNMR spectra are consistent with the diffraction-determined structure and indicate substantial distortion of the anion from cubic symmetry. Solution-state spectra of precursor solutions and of melted material are also presented and discussed.     

压力、温度和晶粒尺寸对Fe-N合金的合成及结构的影响

在 1× 1 0 - 3 Pa～ 4 GPa的压力和 5 80～ 930 K温度范围内 ,利用高压技术并结合机械球磨 ,研究了压力、温度和晶粒尺寸对α-Fe与非晶 BN的固态反应的影响 .发现高压和晶粒细化可以极大地促进α-Fe和非晶 BN的固态反应过程 ,α-Fe与非晶 BN发生固态反应的临界晶粒尺寸约 8nm.压力和温度对反应产物及其晶体结构有明显影响 .2 GPa和 80 0 K时 ,反应产物为具有正交结构的 Fe-N新相 ;在 3～ 4 GPa和 690～80 0 K时 ,可形成单一ε-Fex N合金相 ;而在 4 GPa和 930 K以上 ,反应产物由 Fe-N合金相转变为 Fe3B相     

铁矿粉化学热加工中亚铁含量的测定

提出了一种铁矿粉热加工生产工艺中亚铁含量测定的新方法。在氮气保护下，用盐酸溶出样中的亚铁，在硫磷混酸介质中以重铬酸钾标准溶液滴定，并对溶样条件进行了研究。该方法简单、快速、准确，已成功地应用于氧化催化法生产氧化铁中亚铁的控制分析和成品鉴定。