圆窗片表面次级电子倍增效应的数值模拟

基于Monte Carlo模拟算法, 建立了粒子输运模型, 通过对盒形窗内圆窗片表面次级电子倍增现象进行数值仿真, 获得了TE₁₁模非均匀分布电场作用下次级电子倍增的规律. 结果表明: 在微波输入端, 指向窗片表面的磁场力起到了维持次级电子与窗片碰撞的作用, 在电场强度较高的区域倍增剧烈, 有质动力对倍增无贡献; 在微波输出端, 受背离窗片表面磁场力的影响, 在表面静电场较弱的情况下, 次级电子倍增不能发生; 当表面静电场足以维持单面倍增的发生, 随着传输功率的增大, 电子渡越时间增长, 有质动力使得倍增强烈的区域由强电场区逐渐转移到弱电场区域. 对利用外静电场抑制微波输入端次级电子倍增效应的方法进行了数值模拟验证. 关键词： 圆窗片 11模')" href="#">TE₁₁模 次级电子倍增 MonteCarlo模拟     

Theoretical study of stereodynamics for the N+H2/D2/T2 reactions

The effects of isotopic variants on stereodynamic properties for the title reactions have been investigated using a quasi-classical trajectory method based on the first excited state NH2（I^2A＇） potential energy surface [Li Y Q and Varandas A J C 2010 J. Phys. Chem. A 114 9644]. The forward–backward symmetry scattering of the differential cross section can be observed, which demonstrates that all these reactions follow the insertion mechanism. Three angle distribution functions P（θr）, P（φr）, and P（θr, φr） with different collision energies and target molecules H2/D2/T2 are calculated. It is shown that the product rotational angular momentum is not only aligned, but also oriented along the direction perpendicular to the scattering plane. The title reaction is mainly governed by the ＂in-plane＂ mechanism through the calculated distribution function P（θr, φr）. The observable influences on the rotational polarization of the product by the isotopic substitution of H/D/T can be demonstrated.     

Encapsulation of Photosensitizers and Upconversion Nanocrystals in Lipid Micelles for Photodynamic Therapy

Photodynamic therapy (PDT) is a promising method for cancer therapy. However, it is constrained by limited penetration depth of visible light, hydrophobicity of photosensitizers, and lack of tumor targeting. In this work, the photosensitizer zinc phthalocyanine (ZnPc) and upconversion nanocrystals (UCNs) are encapsulated into OQPGA‐PEG/RGD/TAT lipid micelles. The UCNs acting as a nanotransducer convert deep‐penetrating near‐infrared (NIR) light to visible light for activating the photosensitizer. OQPGA‐PEG/RGD/TAT lipid micelles are used as a carrier for the photosensitizer, with improved biocompatibility and cancer‐targeting ability. The results show that the photosensitizer ZnPc‐ and UCNs‐loaded OQPGA‐PEG/RGD/TAT lipid micelles are nanoparticles with an average size of 25 nm. The lipid micelle nanoparticles are stable in water with low leakage of photosensitizer. The absorption peak of the photosensitizer overlaps with the emission peak of UCNs, so the visible fluorescence emitted from the UCNs upon excitation by the NIR laser at 980 nm can activate the photosensitizer to produce singlet oxygen for PDT. The targeting RGD peptide and cell‐penetrating TAT peptide on the surface help the nanoparticles getting into cancer cells. The OQPGA‐PEG/RGD/TAT lipid micelles encapsulated with both the photosensitizer ZnPc and UCNs could be used for targeted PDT by using deep‐penetrating NIR light as the light source.     

Compare study between smoothing efficiencies of epicyclic motion and orbital motion

The smoothing efficiencies of epicyclic motion and orbital motion in CCOS (computer controlled optical surfacing) were compared. CCOS polishing can smooth out mid-to-high spatial frequency errors which are smaller than tool size on optical mirrors due to the rigidity of polishing tools. The smoothing efficiencies of epicyclic motion and orbital motion with pitch lap and RC lap were compared and the result proved pitch lap with epicyclic motion smoothed ∼1.6 times faster than pitch lap with orbital motion while RC lap with epicyclic motion smoothed ∼1.85 times faster than RC lap with orbital motion.     

不同窑口古代青瓷的产地特征的中子活化分析

产地属性是科学鉴别遗址和墓葬中出土的古陶瓷烧制产地的重要依据.用仪器中子活化（INAA）有损分析了浙江寺龙口越窑、江西洪州窑和陕西耀州窑出土的古瓷碎片样品,通过实验数据的统计分析,结果表明3个窑口古瓷的元素组成具有各自的特征,它们之间具有可以区分的依据,寺龙口越窑与南方江西洪州窑的制胎原料关系较近,与北方陕西耀州窑的关系较远.这些试验结果将为古陶瓷地研究提供重要参数.Provenance characteristic is an important scientific parameter to identify ancient porcelain wares unearthed from sites and graves.The porcelain samples of Si Long Kou kiln of Zhejiang Province,Hong Zhou kiln of Jiangxi Province and Yao Zhou kiln of Shanxi Province have been analyzed with neutron activation analysis(NAA) in this paper.The experimental data were studied with statistic methods.The results show that the chemical compositions of porcelain body samples for three kilns were different. The difference was been able identified. The body materials of both Si Long Kou Yue kiln and Hong Zhou kiln of Jiangxi were similar. The samples of Yao Zhou kiln in north of China existed obvious difference.     

废轮胎热解油的成分分析及二次热解反应

对废轮胎在中试回转窑中进行中温热解(450~650℃)所得热解油进行了GC-MS研究。通过对热解油化学组成 的全面分析,讨论了轮胎热解反应,尤其是较高热解温度和较长气相停留时间下的二次热解反应途径。通过与不同反应器 的比较研究,进一步得出了微负压回转窑热解技术的反应特点,并为回转窑热解油的应用提供了重要参考依据。     

自然循环加热段内对流传热特性的实验研究

本文以常压去离子水为工质,对自然循环工况下上升加热段内单相水的对流传热特性进行了实验研究。实验结果表明,自然循环工况下上升加热段内工质的物性变化及由浮升力引起的自由流动对对流传热特性有重要影响。通过分析,提出了计算自然循环工况下上升加热段内单相水的对流换热系数的经验关系式。     

多普勒漂移对超音速燃气流光辐射特性计算的影响

分析了超音速射流由于高速相对运动产生多普勒谱线漂移效应对光辐射特性计算的影响。通过采用逐线计算法对不同环境压力、气流温度、气流速度条件下超音速燃气射流在不同的红外光谱区(2.7微米谱带和4.3微米谱带)光辐射谱带积分强度的计算结果比较表明:多普勒漂移效应受环境总压影响最大,压力越大多普勒漂移的影响越小;随着温度升高多普勒漂移效应的影响降低;随着相对速度的增加,多普勒漂移效应的影响多数情况下是增加的。     

水蒸气超音速非平衡凝结流动中的激波效应

对水蒸气超音速非平衡凝结流动进行了数值模拟,研究了水蒸气超音速流动过程中的非平衡相变及凝结激波现象,揭示了压缩激波与核化凝结流动之间相互作用的非平衡流动规律.发现了激波的耗散效应对非平衡相变的影响,探讨了激波发生时,波阵面处核化凝结、液滴生长的变化规律.     

单色仪转角重复精度的相位板衍射准直方法测量

为准确测量上海光源软X射线谱学显微光束线采用的变包含角平面光栅单色仪的转角重复精度,提出了一种新的基于相位板衍射准直技术的测量方法.该方法将半导体激光单模光纤和相位板衍射准直技术结合起来,利用面阵CCD采集图像,通过测量光斑的位移变化确定平面镜和光栅的角度变化.实验表明.该方法可以测量掠入射情况下单色仪联动时的转角重复精度,测量精度可达士0.1",此测量精度优于同等实验条件下的商用ELCOMAT 3000自准直仪的测量精度.