Concurrent formation of two different type precipitation-free zones during the initial stage of homogenization

Transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy were used to study the microstructure evolution of Al–Cu–Mg alloy during the initial stage of homogenization. It was found that two types of precipitation-free zones (PFZs) can form concurrently: one near grain boundaries and the other at the grain centres. Depth profile analyses of solute concentrations and dislocation-loop distributions strongly suggested that the formations of the two type of PFZs are different, due solely and exclusively to solute and vacancy depletion, respectively. A mechanism model was proposed to explain the concurrent formation of the two different type of PFZs during the initial stage of homogenization.     

Relaxation dynamics of stretched polymer chains traced by shear induced Shish‐Kebab structure

We have developed a morphologic method to investigate the relaxation processing of the stretched polymer chains in melts, in which an atomic force microscope probe was used to shear the surface of an isotactic polypropylene melt to obtain the isolated shish‐kebab structure. We present the results of the time dependence of length of the isolated shish‐kebab structure and the stress dependence of the kebab density along the direction of shish in this paper. Our results demonstrate that the shear‐oriented polymer melts show the relaxation dynamics of worm‐like chain where the length deficit of the isolated shish‐kebab structure is scaled with the relaxation time as a power of 1/3. The melting behavior of shish‐kebab structure was also investigated. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 907–914     

A modified procedure for synthesis of the side chain of ceftazidime-activated thioester

A modified procedure for synthesis of the side chain of ceftazidime-activated thioester has been established. This key intermediate of ceftazidime was obtained by a more eco-friendly process than conventional methods, and the yield was much higher (up to 92.4 %). It was found that different organic bases (triethylamine or pyridine) used in this reaction had different effects. The reaction conditions were also optimized to make the route more competitive and suitable for large-scale industrial production.     

Synthesis of 5-Thio-D- Galactopyranose

5-Thio-D-galactopyranose has been synthesized from diacetone galactofuranose in nine steps and 13.4% overall yield. The key step involved a successful conversion of furanosyl 5,6-epoxide with an L-altrose configuration into the corresponding 5,6-thiirane D-galactose derivative, which was hydrolyzed to the target compound.     

Dye sensitized solar cells prepared by flames stabilized on a rotating surface

A previously developed flame synthesis method was applied to the preparation of mesoporous titania films for application in dye sensitized solar cells (DSSC). The method combines the synthesis of narrowly sized, ultrafine metal oxide particles with controllable chemical and phase purity and the deposition of these particles into a uniform, porous thin film in a single step. The current work used a series of ethylene–oxygen–argon flames to produce DSSC anode films of wide ranging properties. The performance of the solar cells prepared with these anode films was studied at the fundamental level with respect to variations of the titania crystal phase purity and content resulting from changes primarily from flame stoichiometry changes. Based on the basic relationship established among flame synthesis condition-material property-cell performance, a highly efficient DSSC was designed, which shows photocurrent densities better than some of the best performing cells reported to date. Additional studies have focused on a demonstration of the suitability of the flame process in engineering TiO₂ films structurally and chemically with the potential of further improved DSSC efficiency.     

Extended breakdown of Simpleman approximation

In this letter, we solve three-dimensional time-dependent Newton equations for atoms interacting with a ten-cycle elliptically polarized laser pulse. The ionized electron momentum distributions show a tilt angle between the distribution density peak and the main polarization axis. The tilt angle’s behavior changes with an increasing laser intensity. We show that this behavior change is directly related to the release time of the electron from the atom.     

An optical study of the D-D neutron irradiation-induced defects in Co-and Cu-doped ZnO wafers

Room-temperature photoluminescence and optical transmittance spectroscopy of Co-doped(1×1014,5×1016,and 1×1017cm-2) and Cu-doped(5×1016cm-2) ZnO wafers irradiated by D-D neutrons(fluence of 2.9×1010 cm-2) have been investigated.After irradiation,the Co or Cu metal and oxide clusters in doped ZnO wafers are dissolved,and the wu¨rtzite structure of ZnO substrate for each sample remains unchanged and keeps in high c-axis preferential orientation.The degree of irradiation-induced crystal disorder reflected from the absorption band tail parameter(E0) is far greater for doped ZnO than the undoped one.Under the same doping concentration,the Cu-doped ZnO wafer has much higher irradiation-induced disorder than the Co-doped one.Photoluminescence measurements indicate that the introduction rate of both the zinc vacancy and the zinc interstitial is much higher for the doped ZnO wafer with a high doping level than the undoped one.In addition,both crystal lattice distortion and defect complexes are suggested to be formed in doped ZnO wafers.Consequently,the Co-or Cu-doped ZnO wafer(especially with a high doping level) exhibits very low radiation hardness compared with the undoped one,and the Cu-doped ZnO wafer is much less radiation-hard than the Co-doped one.     

Analysis of total nitrogen and total phosphorus in soil using laser-induced breakdown spectroscopy

Laser-induced breakdown spectroscopy(LIBS) is used to determine the total nitrogen(TN) and total phosphorus(TP) in soil.Quantitative determinations are conducted using the line intensity of the analyte element and element concentration.Calibration models are obtained using ten samples for TN and seven samples for TP.The rest samples are used to validate the results.Strong linear correlations are obtained from the determined TN and TP concentrations.LIBS is a powerful tool for analyzing soil samples to determine nutrient elements by selecting calibration and validation samples with similar matrix composition.     

Impacts of air pressure on the evolution of nanosecond pulse discharge products

Based on the nonequilibrium plasma dynamics of air discharge, a dynamic model of zero-dimensional plasma is established by combining the component density equation, the Boltzmann equation, and the energy transfer equation. The evolution properties of nanosecond pulse discharge (NPD) plasma under different air pressures are calculated. The results show that the air pressure has significant impacts on the NPD products and the peak values of particle number density for particles such as O atoms, O3 molecules, N2(A3) molecules in excited states, and NO molecules. It increases at first and then decreases with the increase of air pressure. On the other hand, the peak values of particle number density for N2(B3) and N2(C3) molecules in excited states are only slightly affected by the air pressure.