Speciation analysis of aluminium(III) in natural waters and biological fluids by complexing with various catechols followed by differential pulse voltammetry detection

The biological effects of aluminium have received much attention in recent years. Speciation of Al is of basic relevance as it concerns its reactivity and bioavailability. A differential pulse voltammetry (DPV) procedure is proposed for speciation analysis of Al(III) in natural waters and biological fluids using six catechols (L-dopa, dopamine, epinephrine, norepinephrine, caffeic acid and o-benzenediol) as electroactive ligands. The decrease of the DPV anodic peak current for each catechol ligand is linear with the increase of Al concentration. This speciation analysis idea is based on the measurement of the complexation capacity, namely, different affinities of Al(III) for catechols and organic ligands under two pH conditions. The labile monomeric Al fraction (mainly inorganic aluminium) is determined at pH 4.6, while the total monomeric Al fraction is determined at pH 8.5. The principle for Al(III) speciation analysis by an electrochemical method is discussed. This sensitive and simple fractionation method is successfully applied to the speciation analysis of Al in natural waters and the results agree well with those of Driscoll's method. The speciation analysis of Al in biological fluids is also explored and the results are compared with those obtained by ultrafiltration and dialysis. Compared with other speciation protocols the electrochemical method possesses some remarkable advantages: rapidity, high sensitivity, cheap instrumentation and a simple operation procedure.     

Oxidation of Stereo‐regular Poly(styrene‐co‐4‐methylstyrene) by Cobalt(II) Acetate Tetrahydrate/Sodium Bromide Catalyst

Chemical modification on the stereo‐regular poly(styrene‐co‐4‐methylstyrene) (sPS‐PMS) was attempted in this study. Metallocene copolymerization of styrene (St) and 4‐methylstyrene (MSt) was performed by using η⁵‐pentamethylcyclopentadienyl‐titanium(IV)tributoxide (Cp*Ti(OBu)₃)/methylaluminoxane (MAO)/tri‐iso‐butylaluminum (TIBA) catalyst in the bulk state. Cobalt(II) catalyst was then applied to oxidize the benzylic methyl group on the MSt units of the resulting sPS‐PMS copolymer. Both aldehyde and carboxylic acid in the oxidized products were resolved by the FTIR and ¹H NMR. The oxidized sPS‐PMSs exhibit a low and a high‐temperature T_g and T_m corresponding to the transitions in the amorphous and the crystalline regions. Hydrogen‐bond and polar interactions between the aldehyde and carboxylic acids tend to interrupt the regular chain packing of the oxidized sPS‐PMS, resulting in the lowering of T_m with oxidation level. The oxidized sPS‐PMS showed better adhesion to glass fiber than pure sPS‐PMS copolymer as evaluated from the respective SEM fractured micrographs.     

Synthesis and biological activity of novel epothilone aziridines

[reaction: see text]. A series of 12alpha,13alpha-aziridinyl epothilone derivatives were synthesized in an efficient manner from epothilone A. The final semisynthetic route involves a formal double-inversion of stereochemistry at both the C12 and C13 positions. All aziridine analogues were tested for effects on tubulin binding polymerization and cytotoxicity. The results indicate that the aziridine moiety is a viable isosteric replacement for the epoxide in the case of epothilones.     

Concise total syntheses of the bioactive mesotricyclic diterpenoids jatrophatrione and citlalitrione

The highly functionalized [5.9.5] tricyclic framework resident in jatrophatrione (1) and citlalitrione (2) has been synthesized. The route begins with the tandem anionic oxy-Cope rearrangement/methylation/transannular ene cyclization of 21 and subsequent introduction of a conjugated enone double bond. Hydroxyl-directed 1,4-reduction of this functionality in 25 with LiAlH(4)/CuI/hexamethylphosphoramide/tetrahydrofuran sets the stage for the implementation of a Grob fragmentation and expedited generation of 27. Stereocontrolled intramolecular hydrosilylation allows for the subsequent introduction of a cyclic carbonate as in 53. This intermediate undergoes remarkably efficient, fully regiocontrolled Treibs reaction to generate 54, with this maneuver serving as a pivotal step for making 1 available five steps later. Treatment of 1 with m-chloroperbenzoic acid leads to 2, with attack occurring preferentially on a alpha-face of the double bond more remote to the carbonyl.     

Systematic investigation of the hydrothermal syntheses of Pr(III)-PDA (PDA = pyridine-2,6-dicarboxylate anion) metal-organic frameworks

A series of novel two-dimensional (2D) and three-dimensional (3D) praseodymium coordination polymers, namely, {[Pr3(PDA)4(HPDA)(H2O)8] x 8H2O}n (2), {[Pr2(PDA)3(H2O)3] x H2O}n (3), {[Pr(PDA)(H2O)4] x ClO4}n (4), and { [Pr2(PDA)2(H2O)5SO4] x 2H2O}n (5) (PDA = pyridine-2,6-dicarboxylic anion), was designed and synthesized under hydrothermal conditions. Complexes 1-3 (chainlike polymer, {[Pr(PDA)(HPDA)(H2O)2] x 4H2O}n (1) was also obtained independently by us, although it has been reported recently by Ghosh et al.) were fabricated successfully by simply tuning the Pr/PDA ratio and exhibited various and intriguing topological structures from a 1D chain to a 3D network. While the synthetic strategy of 5 was triggered and further performed only after 1 was structurally characterized. The complexes were characterized by X-ray single-crystal determination, spectroscopic, and variable-temperature magnetic susceptibility analyses. In complex 2 an unusual nanosized square motif as a building block constructed by eight Pr ions was further assembled into a highly ordered 2D grid compound. In complex 3 the decanuclear Pr metal-based structure as a repeat unit interpenetrated to form a novel 3D polymer. Complex 4 was a 3D network polymer fabricated through a hexanuclear Pr ring as a building block, and ClO4- anions as guests were trapped in the cavity. In complex 5 six Pr atoms, two SO4(2-) anions, and carboxylic oxygen bridges constructed an intriguing rectangle structure as a repeat unit in the grid to form a 2D coordination polymer in which the unique bi-bidentate coordination mode of SO4(2-) anion was observed.     

Molecular design of free volume as a route to low-kappa dielectric materials

Polymers incorporating the triptycene subunit were prepared for the molecular-level design of low dielectric constant (low-kappa) materials that can be used to manufacture faster integrated circuits. Triptycenes having restricted rotation by multiple point attachment to the polymer backbone are shown to introduce free volume into the films, thereby lowering their dielectric constants. The triptycene containing polymers exhibit a number of desirable properties including low-water absorption and high thermal stability. Systematic studies wherein comparisons are made between two separate classes of triptycene polymers and their non-triptycene containing analogues demonstrate that proper insertion of triptycenes into a polymer backbone can give rise to a reduction in the material's dielectric constant while also improving its mechanical properties. These characteristics are desired by the semiconductor industry for the next generation of microprocessors and memory to provide insulation of the increasingly shrinking features.     

Electrochemical insertion of magnesium ions into V2O5 from aprotic electrolytes with varied water content

The electrochemical performance of V2O5 has been studied in propylene carbonate (PC)-containing magnesium perchlorate [Mg(ClO4)2] electrolytes in view of their application as positive electrode in the rechargeable magnesium batteries. V2O5 exhibited good properties in hosting magnesium ions and its electrochemical performance depended on the amount of H2O in the electrolytes. The highest first discharge specific capacities of V2O5 electrode was up to 158.6 mAh/g in 1 mol dm(-3) Mg(ClO4)2 + 1.79 mol dm(-3) H2O/PC electrolytes. Electrochemical impedance spectroscopy (EIS) and charging-discharging tests showed that a reasonable amount of H2O in the electrolyte solution facilitated the electrochemical performance of V2O5 electrodes.     

Elucidating dominant factors of PO43-, Cd2+ and nitrobenzene removal by biochar: A comparative investigation based on distinguishable biochars

Four distinct biochars were employed to remove three typical pollutants, meanwhile, path analysis, a multi-statistical regression method, was performed to elucidate the dominant factors of biochar adsorption. This work can provide a new insight to prepare a targeted biochar as adsorbents.     

Mammalian cell growth studiedin situ by fourier transform infrared spectroscopy

Fourier transform infrared techniques were used to monitor mammalian cell growth plated on attenuated total reflection (ATR) crystals. Consistently, the growth kinetics plots generated from the obtained spectra demonstrated a sigmoidal curve representing a sequence of slow, rapid, then tapering cell growth which correlated well with non-spectral cell growth determinations. Significant advantages over traditional methods of measuring cell growth kinetics are demonstrated. The technique has promising potential to be used to study events in areas such as toxicology and cell biology.     

三溴偶氮胂催化光度法测定痕量铁

本文研究了硫酸介质中痕量 Fe(Ⅲ)催化加速抗坏血酸、溴酸钾和三溴偶氮胂之间的褪色反应及动力学条件,建立了动力学光度法测定痕量Fe(Ⅲ)的新方法.方法灵敏度为1.82×10~(-12)g·ml~(-1).测定范围为Fe(Ⅲ)0～30ng/25ml.已用于人发和食品中痕量铁的测定.结果满意.