Phosphonium and arsonium ylides. XVII. A facile synthesis of methyl 2,6-bisperfluoroalkylbenzoates via acyclic precursors

The title compounds 6a—6f were prepared with high yield via intramolecular Wittig reaction of methyl 3-perfluoroalkyl-6-peifluoroacyl-2-triphenylphosphoranylidenchex-3,5-dienoates (5a—5i) which were obtained from the reaction of 3-perfluoroacylprop-2-enylidenetriphenylphosphoranes (3a—3c) with methyl perfluoroalkynoates (4a—4c).     

Ion excitation in a linear quadrupole ion trap with an added octopole field

Modeling of ion motion and experimental investigations of ion excitation in a linear quadrupole trap with a 4% added octopole field are described. The results are compared with those obtained with a conventional round rod set. Motion in the effective potential of the rod set can explain many of the observed phenomena. The frequencies of ion oscillation in the x and y directions shift with amplitude in opposite directions as the amplitudes of oscillation increase. Excitation profiles for ion fragmentation become asymmetric and in some cases show bistable behavior where the amplitude of oscillation suddenly jumps between high and low values with very small changes in excitation frequency. Experiments show these effects. Ions are injected into a linear trap, stored, isolated, excited for MS/MS, and then mass analyzed in a time-of-flight mass analyzer. Frequency shifts between the x and y motions are observed, and in some cases asymmetric excitation profiles and bistable behavior are observed. Higher MS/MS efficiencies are expected when an octopole field is added. MS/MS efficiencies (N(2) collision gas) have been measured for a conventional quadrupole rod set and a linear ion trap with a 4% added octopole field. Efficiencies are chemical compound dependent, but when an octopole field is added, efficiencies can be substantially higher than with a conventional rod set, particularly at pressures of 1.4 x 10(-4) torr or less.     

红外光谱法研究LB膜中的分子取向

The structure information of orientation and packing of molecular chains can be obtained from infrared transmission and reflection-absorbance (RA) spectra. In the present paper, on the basis of Umemura et al., their FORTRAN program of minicomputer was developed and can be run on 486 personal computer. By comparison of infrared transmission and RA intensities, surface enhancement factors and molecular orientation angle were calculated using the above program, and the influence of complex refractive index, angle of incidence, and thickness of LB film were discussed. These results are consistent with that of Umemura et al.     

Crystal Structures and Magnetic Studies of Naphthalene Derivatives Containing Nitronly Nitroxides

Crystal structures of new nitronyl nitroxide derivatives 1, 2 and 3 were determined with X‐ray diffraction analysis: 1, monoclinic, C₂/c, a = 1.2404(5) nm, b = 0.9730(5) um, c = 2.7049(10) ran, β = 98.189(15)°, V = 3.2315(24) nm³, Z = 8; 2, or‐thorhombic, Pbca, a = 0.61262(2) nm, b = 1.11426(6) nm, c = 2.30543(13) nm, V = 1.57373(13) nm³, Z = 4; 3, monoclinic, P2(1)/n, a=0.64253(4) nm, b=2.55003(17) nm, c = 1.15497(6) nm, β = 95.000(3)°, V = 1.8852(2) nm³, Z = 4. Their magnetic properties were measured with SQUID and analyzed based on their crystal structures with simple singlet‐triplet, modified one dimensional antiferromagnetic chain and modified singlet‐triplet models respectively: 1, J/k_b= ?2.5 K; 2, J/k_b = 7.8 K, θ = 2.8 K; 3, J/k_b = ?0.96 K, θ = 0.21 K.     

流动分析法同时测定铬（Ⅵ）及铬（Ⅲ）过程中铈（Ⅳ）氧化剂的影响

以Ｃｅ（Ⅳ）为氧化剂，采用流动分析在线氧化技术，实现了对Ｃｒ（Ⅵ）和Ｃｒ（Ⅲ）的同时在线分析，发现Ｃｅ（Ⅳ）氧化剂在测定过程中产生负干扰，在而Ｃｒ（Ⅲ）存在时会使Ｃｒ（Ⅵ）的测定结果偏高，本文提出了一个校正模型，通过数学方法消除上述干扰，所建立的分析方法对Ｃｒ（Ⅵ）和Ｃｒ（Ⅲ）分析的平均相对误差不大于６．５％。     

Recent progress in two-photon small molecule fluorescent probes for enzymes

This review aims to provide a summary of the progress in TP small molecule fluorescent probes for enzymes in recent years and displays the main fluorescent mechanisms that have been applied to design probes.     

掺杂ZrO＿2的Pt／Al＿2O＿3表面氧性质及一氧化碳氧化性能研究

用ＴＰＤ－ＭＳ、ＴＰＳＲ－ＭＳ及ＣＯ氧化活性测定等方法研究了Ｐｔ／Ａｌ２Ｏ３和掺杂超细ＺｒＯ２的样品的表面氧脱出－恢复性能、ＣＯ表面氧化性能及催化氧化性能．结果表明，在Ｐｔ／Ａｌ２Ｏ３中掺杂ＺｒＯ２后，样品表面上的氧物种脱出和氧化恢复性能明显提高，脱氧量也明显增大；并发现在ＣＯ－ＴＰＳＲ过程中程脱物ＣＯ２的脱附量大小及峰顶温度次序与对ＣＯ的催化氧化活性也有一致的关系     

Preparation and properties of polyurethane networks based on α,ω-difunctional poly(hexafluoropropylene oxide)

Poly(hexafluoropropylene oxide), poly(HFPO), networks were prepared from functional polymers by end linking via urethane groups. The prepolymers were characterized by NMR spectroscopy and GPC. The networks were characterized by determination of the number of network chains from the shear modulus, and were snown to contain both trifunctional crosslinks and difunctional links. The properties of the networks were investigated by a range of techniques. Compared with fully-fluorinated networks formed via triazine cross-links, investigated previously, the urethane-linked networks were more readily prepared but were poorer elastomers, were less thermally stable, and were less resistant to swelling by common polar solvents. © 1995 John Wiley & Sons, Inc.     

Separation and determination of ephedrine alkaloids and tetramethylpyrazine in Ephedra sinica Stapf by gas chromatography-mass spectrometry

A simple, sensitive, and reliable method using gas chromatography (GC)-mass spectrometry (MS) is developed for the simultaneous determination of ephedrine alkaloids and 2,3,5,6-tetramethylpyrazine (TMP) in Ephedra sinica Stapf. The sample is extracted with ethyl ether and submitted to GC-MS for identification and quantitation without derivatization. The column used for GC is an HP-5 (30.0 m x 250 microm x 0.25 microm, 5% phenyl methyl siloxane), and the carrier gas is helium. The detection limits for ephedrine, pseudoephedrine, and TMP are 0.4 ng 0.7 ng, and 0.02 ng (signal-to-noise ratio of 3), respectively. The reproducibility of the total procedure is proved to be acceptable (RSD < 2%), and the recoveries are above 93%.     

对MDTA中测样品热容量的准恒温法的评述

对用调制差热分析（ＭＤＴＡ）准恒温法测样品热容量的情形进行了讨论。通过结合最基本的热传导定律和ＭＤＴＡ模型，指出了目前国际上测量样品热容量的准恒温法只能得到在所测温度范围内的物质热容量平均值，调制温度的幅度越大或调制频率越高，所得到的热容量数据越平滑。在所测温度范围内样品热容量基本不变时，用ＭＤＴＡ准恒温法较好；但当样品热容量在所测温度范围内有明显变化时，用传统差热分析法（ＤＴＡ）更好一些。