Two singular integrals containing a partial wave of the two-body coulomb T-matrix

The operatorsT _C,l E+i0)[–G ₀(E+i0)]^1–i andT _C,l(E+i)G ₀[–iG ₀(E+i)]ⁱ acting on spaces of Hölder continuous, differentiable and analytic functions are investigated. The results of their action are expressed in terms of explicit singular factors and terms and Hölder (differentiable, analytic) functions. The most singular part of these operators is shown to be determined by a simple functional.     

The preparation and characterization of novel cocylic(arylene disulfide) oligomers

A series of homo‐ and cocyclic(arylene disulfide) oligomers were synthesized under high dilution conditions by the catalytic oxidation of arylenedithiols with oxygen in the presence of a copper‐amine catalyst in DMAc. The aryl groups contained moieties such as sulfone, ether, and ketone. The free radical ring‐opening polymerization of these cyclic(arylene disulfide) oligomers led to the formation of linear poly(thio arylene)s. The homo‐ and cocyclic(arylene disulfide) oligomers were characterized by gradient high pressure liquid chromatography (HPLC), get permeation chromatography (GPC), ¹H‐NMR, and differential scanning calorimetry (DSC) methods. These cocyclic(arylene disulfide) oligomers except those containing sulfone moiety had lower melt flow temperature as low as 140 °C and therefore could readily undergo free radical ring‐opening polymerization under mild conditions. The glass transition temperatures of these cocyclics ranged from 72.3 to 190.0 °C, while the glass transition temperatures of the polydisulfides derived from these cocyclics ranged from 78.4 to 194.5 °C. In this article, a new method of preparing arylene dithiols 4,4′‐oxybis(benzenethiol) and diphenylmethane‐4,4′‐dithiol is reported. Copyright © 2003 John Wiley & Sons, Ltd.     

4,6-Thioanhydro-hexopyranosides,synthesis and chemical behaviour of methyl 2-0-p-toluenesulfonyl-4,6-thioanhydro-α-d-gulopyranoside

Methyl 4-0-benzoyl-6-bromo-6-deoxy-α-D-glucopyranoside ($\text{1}$, Figure 1) was converted, via the corresponding ditosylate $\text{2}$, into methyl 2,3-di-0-p-toluenesulfonyl-4-0-benzoyl-6-S-acetyl-6-thio-α-D-glucopyranoside ($\text{3}$) by a selective nucleophilic displacement of 6-bromo-group with thioacetate. Unexpectedly, on treating the compound $\text{3}$ with an excess of sodium methoxide in benzene-methanol (1:1) at room temperature, methyl 2-0-p-toluenesulfonyl-4,6-thioanhydro-α-D-gulopyranoside ($\text{4}$) was obtained in a yield of 84%. In order to determine the structure of the relatively unstable oily product $\text{4}$, some stable crystalline derivatives ($\text{5}$, $\text{6}$ and $\text{7}$) were prepared. Detailed analysis of the ¹H-NMR-spectra (200 MHz) of $\text{6}$ and $\text{7}$ gave the conclusive evidence for the structure of $\text{4}$ A self-imposing mechanism of the clean and smooth transformation of $\text{3}$ to $\text{4}$ is proposed, involving: a) formation of $\text{9}$ (Figure 2) as a crucial intermediate and b) a highly regioselective epoxide opening in $\text{9}$ (at C-4) by an intramolecular nucleophilic attack of the mercaptide anion from C-6.     

Flow-injection chemical vapor-generating procedure for the determination of Au by atomic absorption spectrometry

Volatile Au species in an acidified medium were generated at room temperature by reduction with NaBH4 in acidified aqueous medium using a flow-injection chemical vapor-generation atomic absorption spectrometric (FI-CVG-AAS) system in the presence of micro amounts of sodium diethyldithiocarbamate (DDTC). Precision of 2.0% RSD (n = 11, 2.0 mg L(-1) level) was obtained at a sample throughput of 180 h(-1). A detection limit of 24 ng mL(-1) (3sigma) was obtained with 300 microL sample solution. The method was used for the determination of gold in ore sample digests, and the results obtained agreed well with those obtained by flame AAS.     

Computer-assisted optimization of selectivity by tuning temperature and carrier gas pressure drop in two GC capillary columns coupled in series

The paper shows a computer-assisted procedure for the optimization of selectivity of two columns coupled in series by tuning the working temperature (using the isothermal mode) and columns coupling-point pressure at constant inlet and outlet carrier gas pressures. The optimization procedure validation was tested by the separation of 32 hydrocarbons in a column series with the aim to resolve the maximum number of components in the shortest possible analysis time.Dedicated to Professor J. F. K. Huber on the occasion of his 65th birthday     

Highly regioselective construction of spirocycles via phosphine-catalyzed [3 + 2]-cycloaddition

A direct entry to spirocycles with low to moderate regioselectivity was achieved by triphenylphosphine-catalyzed [3 + 2]-cycloaddition of active exo-methylenecycles (1) and ethyl 2,3-butadienoate (2). The regioselectivity of the reaction was greatly improved by using the bulky tert-butyl ester of the 2,3-butadienoate (5). The regioselectivity of the reaction was further enhanced by using the tert-butyl 2-butynoate as the substrate. This protocol provided an efficient entry to the skeleton of spirocarbocycles, especially spiro[4.n]alkanes.     

Alkyne coupling at a rhenium-monocarborane substrate: synthesis of Re,B-eta2:sigma-butadienyl complexes

Treatment of 7-NH(2)Bu(t)-nido-7-CB(10)H(12) in tetrahydrofuran (THF) with LiBu(n)(3 equiv) and then [ReBr(CO)(3)(THF)(2)] gives the rhenacarborane dianion [1-NHBu(t)-2,2,2-(CO)(3)-closo-2,1-ReCB(10)H(10)](2-), isolated as the bis-[N(PPh(3))(2)](+) salt (4). Iodine oxidation of this Re(I) intermediate gives the Re(III) complex [1,2-mu-NHBu(t)-2,2,2-(CO)(3)-closo-2,1-ReCB(10)H(10)] 6 in which the carborane functions formally as an 8-electron (6pi+ 2sigma) donor. Reaction of with ligands L in the presence of Me(3)NO gives substituted products [1,2-mu-NHBu(t)-2,2-(CO)(2)-2-L-closo-2,1-ReCB(10)H(10)][L = PPh(3)(7a), CNXyl (7b; Xyl = C(6)H(3)Me(2)-2,6), or Bu(t)C triple bond CH (7c)]. Formation of complex 7c is unexpectedly accompanied by [1,2-mu-NHBu(t)-2,2-(CO)(2)-3,2-sigma:eta(2)-{C(=CHBu(t))-CH=CHBu(t)}-closo-2,1-ReCB(10)H(9)] 8a, in which an alkyne-derived dienyl group is bound to both the rhenium centre and to an adjacent boron vertex. Complex 8a is also obtained from 7c with Bu(t)C triple bond CH and Me(3)NO. The same reaction of 7c, using PhC triple bond CH or CNXyl instead of Bu(t)C triple bond CH, gives, respectively, [1,2-micro-NHBu(t)-2,2-(CO)(2)-3,2-sigma:eta(2)-{C(=CHBu(t))-CH=CHPh}-closo-2,1-ReCB(10)H(9)] 8b and [1,2-micro-NHBu(t)-2-Bu(t)C triple bond CH-2-CO-2-CNXyl-closo-2,1-ReCB(10)H(10)] 9. Addition of donors L to results in displacement from rhenium of the pendant dienyl moiety, yielding [1,2-mu-NHBu(t)-2,2-(CO)(2)-2-L-3-{C(=CHBu(t))-CH=CHBu(t)}-closo-2,1-ReCB(10)H(9)][L = PMe(3)(10a), CNBu(t)(10b)]. Single-crystal X-ray diffraction analyses have confirmed the novel structural features of compounds 6, 7c, 8b and 9.     

Analytic expressions for the partial waves of the off-shell two body coulomb T-matrix

Closed form expressions for all partial waves of the pure Coulomb off-shell T-matrix p¦ T_c,l.(k ²) ¦p are obtained. All singularities appear through simple special functions, which makes it possible to study the analytic properties of p¦ T_c,l(k²) ¦p as a function not only of one of the momentap, p but even of both of them. With use of the renormalization procedure found by Zorbas the transition to half-and on-shell values is performed reproducing known expressions. By the same method simple expressions for the partial waves of the Coulomb wave function in the momentum representation are found.     

The biosynthetic gene cluster for the antitumor drug bleomycin from Streptomyces verticillus ATCC15003 supporting functional interactions between nonribosomal peptide synthetases and a polyketide synthase

BACKGROUND: The structural and catalytic similarities between modular nonribosomal peptide synthetases (NRPSs) and polyketide synthases (PKSs) inspired us to search for a hybrid NRPS-PKS system. The antitumor drug bleomycin (BLM) is a natural hybrid peptide-polyketide metabolite, the biosynthesis of which provides an excellent opportunity to investigate intermodular communication between NRPS and PKS modules. Here, we report the cloning, sequencing, and characterization of the BLM biosynthetic gene cluster from Streptomyces verticillus ATCC15003. RESULTS: A set of 30 genes clustered with the previously characterized blmAB resistance genes were defined by sequencing a 85-kb contiguous region of DNA from S. verticillus ATCC15003. The sequenced gene cluster consists of 10 NRPS genes encoding nine NRPS modules, a PKS gene encoding one PKS module, five sugar biosynthesis genes, as well as genes encoding other biosynthesis, resistance, and regulatory proteins. The substrate specificities of individual NRPS and PKS modules were predicted based on sequence analysis, and the amino acid specificities of two NRPS modules were confirmed biochemically in vitro. The involvement of the cloned genes in BLM biosynthesis was demonstrated by bioconversion of the BLM aglycones into BLMs in Streptomyces lividans expressing a part of the gene cluster. CONCLUSION: The blm gene cluster is characterized by a hybrid NRPS-PKS system, supporting the wisdom of combining individual NRPS and PKS modules for combinatorial biosynthesis. The availability of the blm gene cluster has set the stage for engineering novel BLM analogs by genetic manipulation of genes governing BLM biosynthesis and for investigating the molecular basis for intermodular communication between NRPS and PKS in the biosynthesis of hybrid peptide-polyketide metabolites.     

[Mn(H_2O)_4(NCS)_2)(18C6)和(Co(H_2O)_4(NCS)_2)(18C6)单晶的培养及物性表征

用凝胶法和蒸发法分别培养出配合物[Mn(H_2O)_4(NCS)_2]18C6)和[Co(H_2O)_4(NCS)_2](18C6)的单晶。对两个配合物进行了溶解性能的测试、元素分析、电导测量、红外光谱分析、热分析和质谱分析。表征的指派为晶体结构分析结果所证实。 。。