光谱成像技术无损鉴别西洋参饮片的研究

应用电可控液晶光谱成像装置,测定不同市售来源的西洋参饮片,以期为其质量控制提供新的方法。系统光谱分辨率5nm,光谱覆盖范围为405～680nm,空间分辨率50lp·mm-1。从成像光谱立方体中提取特征光谱曲线,构建饮片指纹图谱;采用主成分等聚类分析方法解析其指纹图谱,用于饮片真伪鉴别与质量判定。结果与性状,显微及理化鉴定结果相吻合。表明光谱成像分析技术可用于中药指纹图谱的构建和质量评价,操作方法简便、快速、无损。     

Surface redox induced bipolar switching of transition metal oxide films examined by scanning probe microscopy

The bipolar resistive switching mechanisms of a p-type NiO film and n-type TiO₂ film were examined using local probe-based measurements. Scanning probe-based current–voltage (I–V) sweeps and surface potential/current maps obtained after the application of dc bias suggested that resistive switching is caused mainly by the surface redox reactions involving oxygen ions at the tip/oxide interface. This explanation can be applied generally to both p-type and n-type conducting resistive switching films. The contribution of oxygen migration to resistive switching was also observed indirectly, but only in the cases where the tip was in (quasi-) Ohmic contact with the oxide.     

In vitro and in vivo mineralization and osseointegration of nanostructured Ti6Al4V

Surface characteristics of the orthopedic implants remarkably affect the corresponding biological responses. In this study, Ti6Al4V alloy was subjected to the surface mechanical attrition treatment (SMAT) in order to achieve favorable surface properties. The SMAT substrates exhibited a highly hydrophilic surface with nanograins about 20–40 nm. Then, the in vitro and in vivo mineralizations were evaluated on the untreated and SMAT processed substrates. The in vitro experimental results showed a significant increase in the deposition of calcium-containing minerals on the SMAT surface both with and without osteoblasts. The in vivo experiments also revealed a higher bone mineral apposition on the SMAT processed implants after 8 and 12 weeks post operation. The well-organized bone formation on the SMAT substrates indicated an enhanced osseointegration on the bone-implant interface. Therefore, it was suggested that the obvious improvements of biomineralization and osseointegration were attributed to the nanostructure features on the SMAT surface, as well as the higher surface hydrophilicity.     

三维目标与粗糙面复合散射的广义稀疏矩阵平面迭代及规范网格算法

提出了快速计算二维导体粗糙面与面上金属目标复合散射的广义稀疏矩阵平面迭代及规范网格法(G-SMFSIA/CAG).推导了二维导体粗糙面与面上目标相互作用的耦合积分方程,用稀疏矩阵平面迭代及规范网格法(SMFSIA/CAG)求解粗糙面部分的表面积分方程,而用基于RWG基函数的矩量法(MOM)计算目标部分的表面积分方程,并通过更新方程的激励项迭代求解目标与粗糙面的相互耦合作用.结合Monte-Carlo方法产生具有PM(Pierson-Moskowitz)海浪谱的随机海洋粗糙面,数值分析了海面上不同形状导体目 关键词： 复合散射 广义稀疏矩阵平面迭代及规范网格法 随机海洋粗糙面 双站散射系数     

Influence of Sm-substitution on structure and electromagnetic properties of Ba3−xSmxCo2Fe24O41 powders

Sm-substituted barium hexaferrites, Ba_3−xSm_xCo₂Fe₂₄O₄₁ (x=0-0.25), were prepared by a conventional ceramic sintering method. The microstructure, complex permittivity, complex permeability and static magnetic properties of the samples were studied using powder X-ray diffraction, field emission scanning electron microscopy, vector network analyzer and vibrating sample magnetometry. The results reveal that by introducing a relatively small amount of Sm³⁺ instead of Ba²⁺ an important modification of both structure and high-frequency electromagnetic properties can be obtained. Doping of Sm³⁺ suppressed the grain growth and gave rise to a decrease of the grain size. As the Sm content increases, the static magnetic properties continuously increase. The real part and imaginary part of complex permittivity initially increase with Sm content, and then decreases when x>0.10. The imaginary part of complex permeability decreases after Sm³⁺ is doped. There is no obvious change in the real part of the complex permeability for different Sm contents. The reasons are discussed using electromagnetic theory.     

Measurement of the spatial backscattering impulse-response at short length scales with polarized enhanced backscattering

In this Letter, we describe an easy to implement technique to measure the spatial backscattering impulse-response at length scales shorter than a transport mean free path with resolution of better than 10 μm using the enhanced backscattering phenomenon. This technique enables spectroscopic measurements throughout the visible range and sensitivity to all polarization channels. Through a combination of Monte Carlo simulations and experimental measurements of latex microspheres, we explore the various sensitivities of our technique to both intrinsic sample properties and extrinsic instrumental properties. We conclude by demonstrating the extraordinary sensitivity of our technique to the shape of the scattering phase function, including higher order shape parameters than the anisotropy factor (or first moment).     

一种基于运动式发射天线的光学接收天线设计

设计一款应用于多发射天线多接收天线自由空间激光通信系统中的折射式光学接收天线。天线焦距120.02 mm,相对孔径1∶1.13,工作波长为850 nm,波长范围覆盖820 nm ~880 nm,在50 lp/mm频率处0视场的MTF为0.5。接收天线可以在发射天线移动48 mm范围内利用光敏面直径为0.5 mm的雪崩光电二极管（APD）接收3 mrad发散角的光信号。该天线由两组、共4片球面透镜组成,结构简单,可实现对运动式发射天线的光信号的接收。     

几种陆用惯性自寻北方案的比较

介绍几种目前广泛应用于军事及民用工业领域的高精度自寻北方案,同时讨论并分析了这些方案的精度和误差补偿方法,提出在兵器领域尤其是在陆用车辆上的适用性等问题。     

三线摆振动周期与角振幅的关系

本根据机械能守恒定律推出了三线摆的振动周期和角振幅的关系，并据该关系式讨论了角振幅对周期的影响以及角振幅的确定。     

大口径光学元件中频波前的检测

大口径光学元件中频波前的准确评价已成为高功率激光系统中关注的焦点,元件中频波前均方根值是重要评价指标之一。根据波前中频检测频段及波前检测设备频响特性,将波前的中频区域分为两个检测频段,分别采用干涉仪和光学轮廓仪实现了中频波前均方根值的检测。采用大口径干涉仪可实现全口径波前中频区域低频段波前的检测,通过比对大口径干涉仪和采用小口径干涉仪结合分块融合平均方法的检测结果,提出采用分块融合平均方法也可检测相应频段全口径波前均方根。采用光学轮廓仪通过离散采样的方法检测大口径元件中频区域高频段波前均方根,针对不同离散采样方式的实验结果表明：33的采样方式能满足对410 mm410 mm口径元件中频区域高频段波前均方根的检测。