系列退火条件下Bi2201相超导电性的进化

通过对Pb掺杂Bi2201相超导样品进行系列条件下的真空退火处理,固定退火时间,调节退火温度,使得样品氧含量随退火温度升高而降低,从而使样品载流子浓度随退火温度升高而依次降低,进而影响样品超导电性.我们系统研究了退火条件、正常态电阻率和超导电性之间的关联,确定了样品最高超导转变温度的退火条件,讨论了Bi2201相超导样品在系列退火条件下其超导电性的进化,并获得了该体系最高超导转变温度Tconset=43K.     

三价镧系离子掺杂的Cd3Al2 Ge3O12的长余辉发光

系统地研究了三价镧系离子在Cd3Al2Ge3O12基质中的长余辉发光。总结了余辉性能与激活离子电负性的关系。研究发现该体系中易失电子的激活离子产生的余辉效果较好。在254nm紫外光激发下,基质和所有镧系离子(Pm除外)掺杂的样品都有发光和余辉。按照发光和余辉性质的不同可以将激活离子分为三类：Pr^3 、Tb^3 和Dy^3 等是有特征余辉发光的离子;Eu^3 和Sm^3 等是有特征发射,但没有特征余辉发光的离子;Ce^4 、La^3 、Nd^3 以及其他是没有特征发光的镧系离子。长余辉的产生是由缺陷引起的。由于Cd^2 离子在高温下容易挥发,基质中存在大量的Cd^2 离子空位,这种空位可以作为俘获电子的陷阱。同时为了补偿Cd^2 所产生的正电荷,在Cd^2 离子空位周围会有相应的负离子空位产生,比如氧离子空位。这种补偿作用的存在使得基质本身的缺陷种类和数量十分丰富,使得该体系的余辉性能比较优越。     

微腔结构对铕配合物有机电致发光二极管(OLEDs)性能的提高

成功制备了铕配合物的微腔结构有机发光二极管(0LEDs),其发射层采用质量比为1：3的空穴传输材料(TPD)和电子传输材料(Eu(DBM)3bath)的混合层。该器件实现了Eu^3 高色纯度红光发射,其色坐标为(x=0．651,y=0．338);并克服了微腔器件的发光颜色随探测角度增大而变化的缺点。在微腔器件中,最大亮度在19V时达到1160cd／m^2;在高电流密度时的EL效率得到明显提高。     

TiAl3 和Ti/TiAl3 非合金化电极n型GaN欧姆接触的实现

在不进行合金化的情况下,首次直接采用TiAl3合金材料作为金属接触电极.在蓝宝石衬底上生长的n型载流子浓度为2×1018 cm-3的GaN上,成功地得到低接触电阻的欧姆接触,并由环形传输线模型方法测得比接触电阻率为3×10-5 Ω*cm2.与通常n型欧姆接触采用的Ti/Al双层结构比较,TiAl3合金结构更容易形成非合金化的n型欧姆接触.在此实验基础上,进一步分析了N空位和界面层处的TiAl3在形成非合金化或低温退火欧姆接触中发挥的作用,由此设计的Ti/TiAl3/Ni/Au接触结构,在TiAl3合金结构基础上明显地降低了接触电阻率.     

Lamb wave topological imaging for blind hole defects in isotropic plates

The research aims at validating the ability of topological imaging to blind holes in isotropic plates using Lamb waves. Due to the defect is not symmetric around the midplane of the plate, the effect of Lamb mode conversion will have to be taken into account.The imaging method is based on two computations of ultrasonic fields, one forward and one adjoint, performed for the defect-free reference medium. The excited signal and scattered Lamb waves caused by the blind hole, are used as emitting sources to compute the forward problem and the adjoint problem, respectively. With the help of the finite element simulations,the natural refocusing process of the multimode Lamb waves at the defect location is visually demonstrated by the transient acoustic field snapshots at the different moments to strengthen the physical mechanism of the topological imaging method. The numerical results demonstrate that topological imaging has relatively stronger applicability to the blind hole in contrast to classical Delay And Sum(DAS) method and Time Reversal(TR) method. The topological imaging could handle complex Lamb wave signals containing mode conversions without the imaging quality being affected. The proposed imaging method presents a certain developing potential for detecting and imaging asymmetric defects in plate-like configurations using Lamb waves.     

盐酸托哌酮的NMR研究

应用1D NMR和脉冲梯度场2D NMR技术深入研究盐酸托哌酮的溶液结构,对其¹H和¹³C NMR化学位移进行全归属,并讨论其立体化学.     

Effects of Annealing on Schottky Characteristics in A1GaN/GaN HEMT with Transparent Gate Electrode

A1GaN/GaN heterostructure transistors are promising for power and switching applications. In addition, the transparent wide band-gap A1GaN/GaN heterostructure systems have received considerable attention to transparent electronics. Nowdays, Al-doped ZnO （AZO） thin film plays an increas- ingly important role in various fields of transparent electronics.The AZO-gated A1GaN/GaN HEMT with good dc characteristics and frequency character- istics has been reported. Annealing is widely used to improve the electri- cal characteristics of A1GaN/GaN HEMTs. It is re- ported that the Schottky leakage current can be re- duced by over four orders of magnitude by annealing in an A1GaN/GaN heterostructure with ITO/Ni/Au electrode. Pei et al. reported that the transparency of Ni/ITO gates of A1GaN/GaN HEMTs has been sig- nificantly improved after annealing. However, the evaluation of Schottky C V characteristics was ab- sent. Up to now, few results are reported on the Schot- tky annealing characteristics of AZO in A1GaN/GaN HEMT. Thus the effects of annealing on the leakage current, transparency and interface states character- istics need further study.     

激光微多普勒探测系统中降低相位噪音影响的方法研究

相干微多普勒激光雷达具有探测灵敏度高、探测信息量大等特点,特别适合于动目标探测、目标特征识别等应用.本文从线宽和探测距离两个方面讨论了模场相位随机起伏（相位噪音）对于测速准确度的影响,实验证实了相位噪音对激光微多普勒探测的影响,并探索出解决上述问题的方法——光纤补偿法.实验中,以输出波长为1.064 μm单块非平面环形腔激光器为光源,利用光纤补偿方法,并结合时频变换的算法,用外差探测的方式成功观测到了微多普勒频移,在传输距离为11 km时,系统最低探测速度达到了0.5 mm/s,速度分辨率达到了mm/s量级,频率分辨率达到了kHz量级,为微多普勒激光雷达的实际应用奠定了良好的实验基础.     

温度和加热时间对大气环境中纯铁光谱发射率的影响

纯铁的光谱发射率受温度的影响很大,尤其是在大气环境中,由于温度升高加剧了表面的氧化,导致其光谱发射率发生了“无规律”变化。基于基尔霍夫定理,利用研制的反射法光谱发射率测量装置对纯铁1.55μm波长的光谱发射率进行了系统的研究,探讨了温度、加热时间等因素对纯铁光谱发射率的影响。研究结果表明：纯铁的光谱发射率随着温度的升高而增大,并且在一定的温度下出现了峰值和谷值,通过分析有氧化层时金属的发射率模型,解释了这种现象的发生。恒温长时间测量结果表明,在不同的温度下,加热时间对光谱发射率的影响不同。研究结果将进一步丰富纯铁的光谱发射率数据,并为其光谱发射率在大气环境中的应用提供了实验依据。