对卫星近日点旋进现象的分析——"地球的扁率对卫星运动的影响"一文的疏忽

指出了一篇相关文献中的疏漏,讨论了卫星近日点的旋进现象,得出了在一般情况下卫星近日点旋进的快慢程度与近日点本身所处的位置有关的结论.     

A fast directional algorithm for high-frequency electromagnetic scattering

This paper is concerned with the fast solution of high-frequency electromagnetic scattering problems using the boundary integral formulation. We extend the O(N log N) directional multilevel algorithm previously proposed for the acoustic scattering case to the vector electromagnetic case. We also detail how to incorporate the curl operator of the magnetic field integral equation into the algorithm. When combined with a standard iterative method, this results in an almost linear complexity solver for the combined field integral equations. In addition, the butterfly algorithm is utilized to compute the far field pattern and radar cross section with O(N log N) complexity.     

Multi-color display and its model for a white OLED combined with optical color filters

A bright white organic light-emitting diode (OLED) has been successfully fabricated in which a greenish-white emitting host Bis-(2-(2-hydroxyphenyl) benzothiazole)zinc (Zn(BTZ)₂) is doped with an orange-red fluorescent dye 5,6,11,12-tetraphenylnaphthacene (rubrene). The pure white light emission with CIE coordinates of (0.341, 0.334) is achieved at the driving voltage of 20 V, and the corresponding luminance and external quantum efficiency are 4000 Cd/m² and 0.63%. On the other hand, the pure red, green, and blue (RGB) emissions are obtained from the white OLED combined well with RGB custom-built optical color filters (CFs) with peaks at 616, 556, and 456 nm, respectively. Moreover, based upon the color mixture principles, we build a model of multi-color display mixed by the pure RGB emissions under the controllable bias.     

槲皮素包裹修饰硅包银纳米颗粒作为荧光传感器对铜离子的识别作用

制备了一种基于天然产物槲皮素接枝硅包银核壳结构的纳米荧光传感器(Ag@SiO₂@Qc),对铜离子具有好的选择性和灵敏性。Ag@SiO₂@Qc与Cu2+离子结合后,荧光发射强度发生猝灭,并且可通过荧光滴定光谱得到了荧光滴定曲线：y = -32.864x+587.59(R2=0.998),其线性范围分别为：3×10-7~4.8×10-6 mol·L-1,最低检测限为1.0×10-7 mol·L-1。并且将Ag@SiO₂@Qc应用于环境中水样的检测结果的准确度好,精密度高,而且更加环保、方便、快捷,具有很大发展潜力与应用价值。     

LIBS/Raman光谱对称零面积变换自动寻峰方法研究

自动寻峰是进行光谱原位探测、实时自动分析的必要环节,对拓展光谱分析技术到长期海洋监测、石油录井等应用领域具有重要意义。该研究以实验室中获得的LIBS/Raman光谱数据,对Gaussian,Lorenz,Voigt三种线型函数构建的对称零面积变换函数进行了比较研究。结果证明各个光谱峰都存在一个最优的对称零面积变换函数,但三种变换函数在各自的最优化参数下获得的峰位、峰宽一致;以实验室中LIBS和Raman光谱定量实验数据对该方法的测试还证明,对称零面积变换寻峰方法对信号的大范围动态变化适应性强,弱峰识别能力达到或优于人工识别水平,有望应用于将来的LIBS/Raman自动原位分析中去。     

基于自由体积理论及跨接方程的黏度推算模型

结合自由体积理论黏度模型与跨接方程,本文建立了一个适用于从气相到液相且包含临界区在内的黏度推算模型。以水为研究对象,对其对比密度ρ_r(0.01～2.57)、对比温度T_r(0.46～1.12)范围内的黏度进行了计算,计算值与文献实验值的相对偏差绝对平均值为1.81%,近临界区域相对偏差绝对平均值为4.6%。与现有的自由体积理论黏度模型相比,本文建立的黏度推算模型显著提升了近临界区域黏度的计算精度。     

Heat Transport of Electron-Doped Cobaltates

Within the t-J model, the heat transport of electron-doped cobaltates is studied based on the fermionspin theory. It is shown that the temperature-dependent thermal conductivity is characterized by the low-temperature peak located at a finite temperature. The thermal conductivity increases monotonously with increasing temperature at low-temperatures T 〈 0.1 J, and then decreases with increasing temperature for higher temperatures T 〉 0.1 J, in qualitative agreement with experimental result observed from NaxCoO2.     

Preparation of BA/ST/AM nano particles by ultrasonic emulsifier-free emulsion polymerization

A kind of nano particle of butyl acrylate (BA)/styrene (ST)/acrylamide (AM) was prepared through a new method that was ultrasonic emulsifier-free emulsion polymerization, which was a kind of environmental protection and economical method. And no any volatile organic solvent (VOC), emulsifier and initiator were used in this method. Only water was used as solvent. The effects of sonic intensity, sonic time, inorganic salt content, N2 flow velocity, etc. on monomer conversion were studied. TEM photographs showed that its particles size was about 80 nm, which was less than particles size (about 140 nm) through conventional emulsifier-free emulsion polymerization method. The FTIR spectrum showed that after extracted by water for 48 h, CHCl3 for 48 h and THF for 48 hr, respectively, the sample obtained by this way was a ternary copolymer of BA, ST and AM, but not a blend of poly(butyl acrylate), polystyrene and polyacrylamide.