A simple and efficient one step synthesis of 1,3,4-oxadiazoles utilizing polymer-supported reagents and microwave heating

1,3,4-Oxadiazoles can be rapidly and efficiently synthesized from a variety of carboxylic acids and acid hydrazides in one simple step. The use of commercially available PS-PPh₃ resin combined with microwave heating delivered the product 1,3,4-oxadiazoles in high yields and purities.     

一锅法制备全乙酰吡喃溴代糖

将未保护的吡喃糖与醋酸酐在分子碘的催化下制得全乙酰吡喃糖 ,随后不经分离直接与溴化氢的冰醋酸溶液( 4 5 %)反应得到全乙酰吡喃溴代糖 .这种一锅法制备全乙酰吡喃溴代糖操作方便 ,收率高 ,经济实用且对环境友好     

医用聚丙烯酰胺水凝胶理化性能测试

测试了医用聚丙烯酰胺水凝胶产品的pH值、折射率、重金属含量、红外光谱、化学热稳定性和丙烯酰胺单体残留量等主要理化性能，重点研究了样品中残留单体丙烯酰胺的高效液相色谱分析法。     

反应挤出法合成S/B多嵌段共聚物的研究

在阴离子引发体系下 ,以双螺杆挤出机为反应器 ,采用丁二烯、苯乙烯混和单体加料方式 ,本体法一步合成了S B多嵌段共聚物 .考察了螺杆转速、进料速率以及不同丁苯配比对反应挤出合成PS及S B嵌段共聚物聚合转化率的影响 .用1 H NMR、IR、DMA、TEM等方法对S B嵌段共聚物进行了表征 ,结果表明共聚物由多个微小的丁二烯嵌段和少量无规段组成 .当丁二烯含量少至 15 %左右时 ,其嵌段可回缩成球状 ,粒径大约在 30～ 5 0nm .该材料的韧性随着共聚物中丁二烯含量的增加而逐渐提高 ,特别是断裂延伸率的提高尤为显著     

Relationship between the molybdenum phases and the conversion of n-butane over Mo/HZSM-5

The conversion of n-C₄H₁₀ was undertaken on MoO₃/HZSM-5 catalyst at 773–973 K and the phases of molybdenum species were detected by XRD. The XRD results show that bulk MoO₃ on HZSM-5 can be readily reduced by n-C₄H₁₀ to MoO₂ at 773 K and MoO₂ can be gradually carburized to molybdenum carbide above 813 K. The molybdenum carbide formed from the carburization of MoO₂ with n-C₄H₁₀ below 893 K is -MoC_1−x with fcc-structure, while hcp-molybdenum carbide formed above 933 K. During the evolution of MoO₃ to MoO₂ (>773 K) or the carburization of MoO₂ to molybdenum carbide (>813 K), deep oxidation, cracking and coke deposition are serious, in particular at higher reaction temperatures, these lead to the poor selectivity to aromatics. Aromatization of n-C₄H₁₀ can proceed catalytically on both Mo₂C/HZSM-5 and MoO₂/HZSM-5, the distribution of the products for the two catalysts is similar below 813 K, but the activity for Mo₂C/HZSM-5 is much higher than that for MoO₂/HZSM-5.     

The Study on the Thermal Stability of CLA in Egg Yolk

Conjugated linoleic acids (CLA) have been a subject of extensive investigation for their anticarcinogenic, hypolipidemic, antiatherosclerotic and immune-enhancing activities. Stability of CLA in foods has not received much attention by both academics and industry. Although CLA has shown many beneficial effects, its decomposition must be prevented when CLA in foods is processed, stored and transported. However, no study to date has addressed the stability of CLA in foods. The present study was carried out further to examine the stability of CLA in egg yolk during the storage and frying, using gas liquid chromatography (GLC) and silver ion high-performance liquid chromatography (Agt-HPLC). The eggs, containing 4.0% CLA per gramme of egg yolk, were 40s. Either storage for 6 months or frying for 40 s did not significantly change the composition of CLA in egg yolk. However, the degradation of CLA was statistically significant when the CLA components of egg yolk protected CLA from degradation. It is concluded that CLA is well preserved in egg before it is consumed.     

Determination of Dopamine in the Presence of Ascorbic Acid on the IrO2-Ta2O5 Type DSA Electrode

IrO2Ta2O5 (70%: 30%, molar ratio) electrodes (ITEs) were prepared by the thermal decomposition method. Typical “mud-cracked” surface and surface enrichment of Ta were observed. The determination of dopamine (DA) was carried out in the presence of ascorbic acid (AA). The detection limit of DA was 5~10 5 mol/L without the interference of AA.     

Controlled/“Living “Radical Polymerization of(-)-Menthyl Methacrylate

The atom transfer radical polymerization(ARP)of (-)-menthyl methacrylatc((-)-MnMA) mediated by CuCl/bipyridine and ethy1 2-bromopropionate or 1-phenylethyl bromide in THF system has been studied.The dependence of the specific rotation on molecular weight and the CD of Poly((-)-MnMA) thus obatined was investigated.     

合成产物PEPAMP及其副产物的电喷雾串联质谱分析

PEPAMP是应用于工业循环水中的新一代高效阻垢剂.采用电喷雾电离质谱和质谱/质谱技术分析了合成产物,注射泵直接进样,正离子方式检测,方法简便、快速.通过EI-MS技术获得了目标产物PEPAMP及主要副产物的准分子离子峰,通过ESI-MS-MS技术获得了其碎片信息,并对目标化合物及主要副产物进行了精确质量测定,确定了目标化合物及主要副产物的结构.     

聚丙烯中硫酯类抗氧剂的质谱分析

采用齐格勒-钠塔催化剂使丙烯催化聚合得到聚丙烯。聚丙烯树脂本身具有优良的性能,如机械强度好,易加工成型,质量轻,成本低等,但也存在一些缺陷,如由于聚丙烯结构中存在叔碳原子,在造粒加工、贮存和使用过程中,易受热、光、氧等的作用而降解,导致材料的性能降低。为了抑制和延缓聚丙烯的氧化降解,需要在造粒阶段加入抗氧剂。本文以一种聚丙烯树脂样品为研究对象,采用溶剂抽提法提取有机添加剂,并用柱层析法对添加剂进行了分离;利用EI-MS分析了添加剂的组成,其中通过谱图解析,鉴定出添加剂中含有硫酯类抗氧剂-硫代二丙酸二(十四)酯(DMTP),并用此类常用化合物进行了验证,分析结果对树脂牌号的开发具有指导意义。