Optical characteristics of semiconductor saturable absorber mirrors investigated by the reflection Z-scan technique

Recently, the semiconductor saturable absorber mirror (SESAM) has become a key component of passive mode-locked solid-state lasers. Here we present a simple method based on the reflection Z-scan technique to measure the key optical parameters of SESAM such as saturation fluence and modulation depth. The experimental results demonstrate that our method is able to perform with a high accuracy of 10⁻⁴ and a dynamic range of over four orders of magnitude.     

塑料闪烁体的辐照特性

利用⁶⁰Co放射源分别对3种塑料闪烁体(BC-408, EJ-200, BC-404)进行辐照损伤研究, 比较辐照前后的透射谱、发射谱及光产额的变化, 发现3种闪烁体在低剂量具有较好的抗辐照性能; 当照射剂量超过1.44×10⁴Gy时,透射谱明显变坏, 光输出减少很严重, 但发射谱却保持不变.     

模拟退火法在吸收薄膜的椭偏反演算法中的应用

将一种广泛用于求解复杂系统优化问题的技术－－模拟退火法－－用来求解椭偏反演方程。首先假设一个薄膜模型，计算出其相应的椭偏参数（Ψ，Δ）的值，在这个计算值的基础上加入不同标准偏差的高斯噪声；然后将加入噪声后的值（Ψm,Δm)作为模拟的测量数据，采用模拟退火算法进行求解，验证得知这种方法求得的薄膜参数很接近于假设的薄膜模型参数的真值，与其他文献的报道结果一致，而且在扩大搜寻范围时，仍然可以得到准确解，从而证明了该方法的可行性以及有效性。     

Homogeneous immunoassays

Applied Biochemistry and Biotechnology -     

利用微悬臂梁表面应力研究聚N-异丙基丙烯酰胺分子的构象转变

提出了一种基于微悬臂梁传感技术研究大分子折叠/构象转变的新方法.通过分子自组装的方法将热敏性的聚N-异丙基丙烯酰胺(PNIPAM)分子链修饰到微悬臂梁的单侧表面，用光杠杆技术检测温度在20—40℃之间变化时由于微悬臂梁上的PNIPAM分子在水中的构象转变所引起的微悬臂梁变形.实验结果显示：在升温过程中，微悬臂梁的表面应力发生了变化并且导致微悬臂梁产生了弯曲变形，这个过程对应着微悬臂梁上的PNIPAM分子从无规线团构象到塌缩小球构象的构象转变.在降温过程中，微悬臂梁发生了反方向的弯曲变形，这对应着PNIPA 关键词： 构象转变 聚N-异丙基丙烯酰胺分子链 表面应力 微悬臂梁     

表面传导电子发射显示器件电场分布的理论研究

利用电磁理论对表面传导电子发射显示器件的单个子像素在笛卡尔坐标系内建立合理的电学物理模型，对内部电场强度和电势进行了深入研究，推导出了模型不同部分的面电荷密度、电场强度和电势的表达式.为了形象地表征其电学特性，利用MATLAB 6.5对电场强度和电势的分布情况进行了模拟，从理论上对模拟曲面给出了合理的解释，分析了子像素内部电子的发射机理和电学行为，并与电子多重散射模型和惯性离心模型进行了对比，解释了SED阳极电流形成的重要原因.在误差允许的范围内，本模型有关电场强度分布的结论与惯性离心模型一致. 关键词： 表面传导电子发射显示 遂穿效应 面电荷密度 电场强度     

Study on anti-emission materials for non-emitting grid applications in microwave power tubes

Hafnium and platinum were deposited onto molybdenum grids by ion-beam assisted deposition method. Electron-emission characteristics from molybdenum grids with Hf and Pt films, which were contaminated by active electron-emission substances (Ba, BaO) of the cathode, were measured using analogous diode method. The surfaces of grids were analyzed by X-ray diffraction. The results revealed that the reaction between BaO and Hf formed BaHfO₃ compound, which greatly reduced the accumulation of BaO on the surface and accordingly decreased grid emission. In contrast, Ba were formed by the decomposition of BaO on the surface of Pt film under high temperature and re-evaporated from its surface, which reduced the active electron-emission substances on the surface of the grid and effectively restrained grid emission. Their mechanisms for grid-emission suppression are discussed and a good method to develop new grid-coating materials is suggested.     

火工品可靠性试验数据的综合分析方法

升降法试验数据和固定刺激量下的成败型试验数据,是两种最常见的火工品可靠性试验数据．我们应用Markov链,研究了升降法试验数据下,感度分布参数的极大似然估计的特性．在此基础上,应用Bootstrap方法和Bayes方法,给出了综合分析两种试验数据的方法．最后,将该方法应用于520底火的可靠性鉴定,得出了有益的结论．     

Simulation of island aggregation influenced by substrate temperature, incidence kinetic energy and intensity in pulsed laser deposition

Using kinetic Monte Carlo method, we have simulated a pulsed energetic growth process in pulsed laser deposition. During the growth of film, substrate temperature mainly influences upon film morphology by directly enhancing the adatom mobility through the temperature-dependent thermal vibration. By contrast, the effect of incidence kinetic energy on film growth is complex resulting from the collisions between the incident particles and the adatoms. The results show that improving incident kinetic energy cannot significantly accelerate the migration rate of adatom but change surface microstructure and promote single adatom formation resulting in more island aggregation density. Moreover, since pulse-influx characterizes pulsed laser deposition, the intensity per pulse contributes to the evolvement of nucleation density and the results illustrate that a general scaling law different from ordinary power law still exists in energetic growth of pulsed laser deposition.