Thermal stability and photoluminescence property of hexagonal MoO3·0.55H2O microrods

The metastable phase of well-faceted, hexagonal, prism-like molybdenum oxide hydrate (MoO₃·0.55H₂O) was successfully synthesized by evaporating molybdic acid solution prepared through cation membrane electrolysis of Na₂MoO₄·2H₂O aqueous solution. The obtained crystals were characterized by X-ray diffraction (XRD), thermogravimetric (TG), scanning electronic microscopy (SEM) and photoluminescence (PL) spectrophotometry. The as-prepared MoO₃·0.55H₂O rods were of 2–4 μm in width and 5–12 μm in length. The MoO₃·0.55H₂O microrods displayed photoluminescence properties at room temperature and were transformed into stable orthorhombic α-MoO₃ after air annealing at 380 °C. Moreover, the influence of temperature factor on the phase transformation process, morphology and photoluminescence properties of MoO₃·0.55H₂O was investigated in detail.     

High-Power Diode-End-Pumped Slab Composite Tm:YLF Compact Laser

We design a continuous-wave Tm:YLF laser with a composite slab crystal end-pumped by two fiber-coupled laser diodes at room temperature. We achieve a maximum continuous wave output power of 105 W for the bonded slab Tm:YLF laser; the corresponding slope efficiency is 47.7% and the optical-to-optical conversion efficiency is 42.0% with respect to the incident pump power. The laser operated at 1,907.5 nm with a beam quality factor of M² ～3.2 at the highest output power.     

在电子传输层中添加PVK提高钙钛矿太阳能电池的性能

为了探究PVK对倒置平面异质结钙钛矿太阳能电池电子传输层的影响,向电子传输层PCBM中添加了一种富电子的聚乙烯基咔唑(PVK).采用原子力显微镜、PL光谱对薄膜进行了表征.实验结果表明:少量PVK的添加提高了覆盖在钙钛矿薄膜上PCBM层的平整度.当PVK的添加质量分数为4%时得到最佳器件效率,相比于纯PCBM作为电子传输层的器件,器件效率由(5.11±0.14)% 提升到(9.08±0.46)%.当PVK的添加质量分数大于4%时,粗糙度又趋于变大.PL光谱显示,少量PVK的加入使钙钛矿/电子传输层薄膜的PL强度降低,并使PL峰蓝移.研究表明:向PCBM中掺杂适量PVK能够改善钙钛矿/电子传输层/Al的界面接触,减少漏电流,并能够减少钙钛矿表面陷阱和晶界缺陷,减少电荷复合,从而提高了器件性能.     

两台自私型机器上自私工件排序的PoA紧界

本文研究了两台自私型机器上有自私型工件的关于二元均衡的排序问题。对任意工件序列$L$, 证明了二元均衡排序的PoA的紧界为$\frac{8}{7}$。如果工件尺寸在区间$[1, r](r\ge1)$内, 得到了二元均衡排序的PoA的紧界为关于$r$的分段线性函数。     

介质阻挡放电中的能量转换过程研究

研究了介质阻挡放电过程中的电流强度、电场强度以及电荷分布的演变规律，并对能量转换性质进行了分析.研究结果表明，在一个放电脉冲过程中，外加驱动电源所作的功、电场能量的增量均与起始时刻的壁电荷密度有关，而气体中放电电流所作的功即沉积于气体中的能量与起始时刻的壁电荷密度、放电电流的具体波形无关. 关键词： 介质阻挡放电 壁电荷 动力学过程 能量转换     

可吸入颗粒物在驻波声场中运动的可视化研究

采用可视化实验的方法,拍摄可吸入颗粒在驻波声场中的运动轨迹.根据拍摄结果,分别采用标尺测量、颗粒重力沉降特性和声波夹带特性计算颗粒粒径.实验表明,可吸入颗粒在声团聚室中受到声波夹带、重力作用和粘性力的影响.计算结果说明,利用声波夹带特性可以准确计算颗粒粒径,颗粒的漂移现象是由漂移力引起.     

N掺杂锐钛矿TiO2光学性能的第一性原理研究

用平面波赝势方法(PWP)计算了N掺杂锐钛矿型TiO2前后的光学特性,即介电函数虚部ε2(w),光学吸收系数I(w)和反射率R(w).并从能带结构上解释了为什么掺N后锐钛矿型TiO2的光学谱在2.93,3.56和3.97 eV处相对掺杂前会出现3个峰值的原因.从光谱图上分析得出,掺杂后TiO2要发生红移现象,实验现象证实了这一结果.     

M元混沌扩频多通道Pattern时延差编码水声通信

Pattern时延差编码水声通信体制利用信息码元的时延值调制信息,他的抗多途扩展干扰能力与码型种类及码型脉宽有关.扩频通信可获得扩频增益,可胜任远程水声通信,但其通信速率低是使用受限的重要原因.提出将扩频通信与Pattern时延差编码水声通信体制相结合,并采用M元扩频、多通道工作方式,构成一种新的适用于水声环境的通信方案,既可获得扩频通信的优良性能,又可提高通信速率.湖试结果验证了本文提出的M元混沌扩频多通道Pattern时延差编码水声通信方案的鲁棒性及可行性.     

Structures and luminescence properties of Yb3＋ in the double perovskites Ba2YB＇O6 （B＇=Ta5＋, Nb5＋） phosphors

The Yb³⁺ doped Ba₂YB'O₆ (B'=Ta⁵⁺, Nb⁵⁺) were prepared by high temperature solid-state reaction method, their structures were determined by x-ray diffraction and refined by Rietveld method. The diffuse reflection absorption, excitation and emission spectra of Yb³⁺:Ba₂YB'O₆ (B'=,Ta⁵⁺, Nb⁵⁺) were measured at room temperature. Under the excitation of ultraviolet light, these phosphors exhibit broad charge transfer band emissions of TaO₆ or NbO₆ centre with large Stokes shift. The Yb³⁺ doped into these hosts are situated at Y³⁺ sites of cubic symmetry (O_h). The experimental energy levels of Yb³⁺ in Ba₂YTaO₆ and Ba₂YNbO₆ were determined by photoluminescence and diffuse reflection absorption spectra. Their wavefunctions and theoretical energy levels were obtained by diagonalising the Hamiltonian matrix. The experimental energy levels were fitted by Levenberg--Marquardt iteration algorithm to determine crystal field parameters. Then, the magnetic-pole transition line strengths of Yb³⁺:Ba₂YB'O₆(B'=Ta⁵⁺, Nb⁵⁺) from (²F_5/2)Γ₈^- to the low-energy states were calculated.     

Structural, magnetic properties and photoemission study of Ni-doped ZnO

Nickel-doped ZnO (Zn_1−xNi_xO) have been produced using rf magnetron sputtering. X-ray diffraction measurements revealed that nickel atoms were successfully incorporated into ZnO host matrix without forming any detectable secondary phase. Ni 2p core-level photoemission spectroscopy confirmed this result and suggested Ni has a chemical valence of 2+. According to the magnetization measurements, no ferromagnetic but paramagnetic behavior was found for Zn_0.86Ni_0.14O. We studied the electronic structure of Zn_0.86Ni_0.14O by valence-band photoemission spectroscopy. The spectra demonstrate a structure at ∼2 eV below the Fermi energy E_F, which is of Ni 3d origin. No emission was found at E_F, suggesting the insulating nature of the film.