Improved multiparty quantum key agreement in travelling mode

The need to simultaneously balance security and fairness in quantum key agreement (QKA) makes it challenging to design a flawless QKA protocol, especially a multiparty quantum key agreement (MQKA) protocol. When designing an MQKA protocol, two modes can be used to transmit the quantum information carriers: travelling mode and distributed mode. MQKA protocols usually have a higher qubit efficiency in travelling mode than in distributed mode. Thus, several travelling mode MQKA protocols have been proposed. However, almost all of these are vulnerable to collusion attacks from internal betrayers. This paper proposes an improved MQKA protocol that operates in travelling mode with Einstein-Podolsky-Rosen pairs. More importantly, we present a new travelling mode MQKA protocol that uses single photons, which is more feasible than previous methods under current technologies.     

A novel carbon source coated on C-LiFePO<Subscript>4</Subscript> as a cathode material for lithium-ion batteries

The poor electronic conductivity and low lithium-ion diffusion are the two major obstacles to the largely commercial application of LiFePO₄ cathode material in power batteries. In order to improve the defects of LiFePO₄, a novel carbon source polyacrylonitrile (PAN), which would form the hierarchical porous structure after carbonization, is fabricated and used. This work comes up with a simple and facile carbothermal reduction method to prepare porous-carbon-coated LiFePO₄ (C-LiFePO₄-PC) composite and to study the effect of carbon-coated temperature on ameliorating the electrochemical performance. The obtained C-LiFePO₄-PC composite shows a high initial discharge capacity of 164.1 mA h g^?1 at 0.1 C and good cycling stability as well as excellent rate capacity (49.0 mA h g^?1 at 50 C). The most possible factors that improve the electrochemical performance could be related to the enhancement of electronic conductivity and the existence of porous carbon layers. In a word, the C-LiFePO₄-PC material would become an excellent candidate for application in the fields of lithium-ion batteries.     

基于腔体滤波器的可调谐微波开关的设计

为了满足无人机数据链路测试中信号转换的需求,提出一种可调谐的S波段分波道微波转换开关设计方案,其中采用开关控制电路对输入微波信号进行分波道选择,两路加载集总电容的三阶方杆梳状腔体滤波器对微波信号进行选频、滤波,同时可通过调节调谐螺钉实现两波道中心谐振频点同频或异频,调谐中心频率范围可达20 MHz,自由度较高;微波开关经参数仿真结果满足设计要求,研制完成的微波开关经过实际测试和应用验证,各项技术指标满足使用要求,同时该微波转换开关具有大功率、低损耗、高隔离度等优点,性能稳定、自由度高、易于实现,可满足无人机数据链测试诊断的信号转接要求。     

基于贝叶斯的智能电能表可靠性评估方法

针对具有高可靠、长寿命特点的智能电能表,应用加速退化试验方法进行可靠性评估是一种有效的方法。开展加速退化试验过程中,在高加速应力激发下,一方面可观测到智能电能表的性能退化,也可能出现智能电能表的整表失效。如何融合智能电能表加速寿命试验过程中的整表失效数据、性能退化数据转化得到的伪寿命数据,从而进行智能电能表的综合可靠性评估,是智能电能表可靠性评估急需解决的问题。本文研究提出基于贝叶斯方法的智能电能表可靠性评估方法,给出融合智能电能表的整表失效数据、伪寿命数据的数据处理方法及计算模型,探讨了伪失效数据计算方法、整表失效数据与伪失效寿命数据相容性检验方法等。     

低β 162.5 MHz taper型HWR腔的机械性能分析（英文）

北京大学正在设计β=0.09,频率为162.5 MHz taper型的二分之一波长射频超导谐振腔(HWR腔),这种腔针对高流强质子束(约100mA)和氘束(约50mA)的加速而设计。对于这种超导腔而言机械性能分析是十分重要的,可以通过机械性能分析来估计由于腔体的形变带来的频率偏移。用ANSYS分析了由于液氦压力不稳定造成的麦克风效应以及洛伦兹力造成的腔体失谐,并且对沿腔体轴线方向的调谐进行了分析。模拟结果显示这只腔压力敏感系数为31.1 Hz/kPa,洛伦兹力系数为-0.41Hz/(MV·m~(-1))~2。腔体的调谐范围达到±177kHz,足够补偿腔体可能的频率偏移。腔体的机械性能满足腔体正常运行的要求。     

基于VISA的PXI设备访问新方法

由于PXI设备的灵活性,在访问过程中需要用户参与到配置过程中。为了方便用户,并增强PXI设备访问的安全性和准确性,避免系统因用户配置问题导致的功能异常,提出了一种基于VISA的以PXI设备串号为基础的设备访问方法。通过将PXI设备的串号信息固化在PXI设备的配置寄存器中,根据设备串号信息自动获得设备资源描述符,进而对设备进行访问。实际应用表明,该方法能够完成对PXI设备的访问,避免了用户的配置过程,实现了PXI设备资源的自动配置,增强了设备访问的安全性和准确性,具有良好的实际应用价值。     

反向响应过程抗负载干扰PID控制回路性能评估

反向响应过程广泛存在于化工领域中,但针对反向响应过程的性能评估研究较少。针对一类二阶时滞反向响应过程,通过幂级数展开的方法简化了对象模型,然后研究其抗负载干扰PID控制回路性能评估问题。根据DS-d控制原理获取期望闭环传递函数以及PID控制器参数,推导干扰模型为阶跃情况下的PID控制回路累积绝对误差(IAE)性能基准值,并将其推广到斜坡输入以及一般输入情形,为不同干扰类型情况下的反向响应过程建立通用化的IAE性能评价标准。仿真结果验证了所提性能评估算法的正确性以及通用性。