Fragmentation of wastewater sludge floc by planar ice front

Floc size has substantial impact on sludge dewaterability, which might be increased or reduced after freezing and thawing. It is commonly assumed that floc size would be increased by low-speed freezing, with a planar ice front rejecting most flocs ahead of it to form large aggregates. We demonstrate in this work that an advancing planar ice front can not only engulf an activated sludge floc of size 3030 mum, but also fragment it. During floc freezing, when the ice engulfed a thin layer of floc, the latter would be pulled apart vertically by the action of the former. This particular portion of floc was then axially elongated and fixed in the frozen layer, with accumulated force pushing upward. In the present test the floc's vertical length was increased by over 92% and its width decreased by 37% over freezing. The force measurement and floc morphology tracking revealed that the force gradient that pulled apart the floc was 0.0027 N/m. The floc under investigation was fragmented at the point where the normal stress acting on the interior network exceeded 8 Pa.     

Novel approach to synthesizing hydrophobically associating copolymer using template copolymerization: the synthesis and behaviors of acrylamide and 4-(omega-propenoyloxyethoxy) benzoic acid copolymer

Hydrophobically associating copolymers of acrylamide (AM) with a small amount of 4-(omega-propenoyloxyethoxy) benzoic acid (PEBA, <2.5%) were synthesized by template copolymerization in the presence of poly(allylammonium chloride) (PAAC) as a template in an aqueous medium. These template copolymers exhibited remarkable thickening properties due to the effective hydrophobic association, which were similar to those copolymers with a multiblock structure obtained by the micellar process. The pH of the reaction medium and the molecular weight of the template strongly influenced the thickening properties of the products. In the experimental range, the higher the PEBA content, the larger the thickening capacity of these hydrophobic copolymers. The aggregate behaviors of these copolymers were studied by fluorescence, transmission electron microscopy (TEM), and light scattering techniques. The apparent critical interpolymer aggregate concentration (cac) of the copolymer solution was about 0.5 g/dL. As the concentration of the copolymer became higher than the cac, the aggregates changed their morphology from small hollow spheres to big flower-shaped aggregates. All the above results indicated that the template copolymerization gave access to a very simple and powerful means for the preparation of hydrophobically associating copolymers and other functional polymer materials.     

Electron field emission characteristics and field evaporation of a single carbon nanotube

Direct transmission electron microscope (TEM) observations of the field emission and evaporation process of emitting carbon nanotubes (CNTs) shown that the tip structure of the CNT is in general composed of irregular shaped graphitic sheets which extend typically more than 10 nm from the end of the CNT. It is found that the irregular shaped graphitic sheets at the tip of the CNT may greatly enhance the field emission characteristics of the CNT when compared with that having an ideal circular edge. The field evaporation of the CNT proceeds typically via the removal of the irregular shaped graphitic sheets from the tip of the CNT, and field emission characteristics of a CNT depend far more sensitively on the tip structure than on the geometric length of the CNT.     

An immediate luminescence enhancement method for determination of vitamin B1 using long-wavelength emitting water-soluble CdTe nanorods

A method for determination of vitamin B₁ has been developed that is based on the enhancement effect of vitamin B₁ on the luminescence of water-soluble CdTe nanorods modified with thioglycolic acid and cysteine. The effect of variables including the size of the nanorods on the enhancement of luminescence have been investigated. A preliminary mechanistic study showed that the passivating action of vitamin B₁ on the surface of the CdTe nanorods is likely to be responsible for the enhancement. Interferences by shortwave fluorescence are effectively eliminated because measurements are performed in the near-infrared. Due to the near-infrared measurement character, the fluorescence interference of vitamin B₂ can be effectively eliminated. Under the optimum conditions, the extent of luminescence enhancement is proportional to the concentration of vitamin B₁ in the range from 0.1 to 3.0 μmol L^?1 and the detection limit is 0.03 μmol L^?1. The relative standard deviation for 2.0 μmol L^?1 vitamin B₁ is 1.3% (n?=?6). The method is highly sensitive and selective, avoids the sample treatment needed in other procedures, and can be applied to the determination of vitamin B₁ in real samples with satisfactory results.     

Metallic Co4N Porous Nanowire Arrays Activated by Surface Oxidation as Electrocatalysts for the Oxygen Evolution Reaction

Designing highly efficient electrocatalysts for oxygen evolution reaction (OER) plays a key role in the development of various renewable energy storage and conversion devices. In this work, we developed metallic Co₄N porous nanowire arrays directly grown on flexible substrates as highly active OER electrocatalysts for the first time. Benefiting from the collaborative advantages of metallic character, 1D porous nanowire arrays, and unique 3D electrode configuration, surface oxidation activated Co₄N porous nanowire arrays/carbon cloth achieved an extremely small overpotential of 257 mV at a current density of 10 mA cm⁻², and a low Tafel slope of 44 mV dec⁻¹ in an alkaline medium, which is the best OER performance among reported Co‐based electrocatalysts to date. Moreover, in‐depth mechanistic investigations demonstrate the active phases are the metallic Co₄N core inside with a thin cobalt oxides/hydroxides shell during the OER process. Our finding introduces a new concept to explore the design of high‐efficiency OER electrocatalysts.     

非完全消化-火焰原子吸收光谱法测定水果中铜铁锌

用非完全消化法处理杏、油桃和草莓样品,即在低温下用浓硝酸-高氯酸(3+1)混合酸消解样品,再加入乳化剂TX-10溶解消化过程中所产生的油脂,将所得橙红色的均匀透明溶液用火焰原子吸收光谱法测定其中铜、铁和锌元素的含量.对样品处理条件、混合酸中杂质及共存TX-10的干扰进行了试验.铜、铁和锌的检出限(3s/k)分别为0.019,0.145,0.009 mg·L-1.用此法测定水果实样中铜、铁和锌的含量,所得结果与灰化法测定结果相一致.     

Development and validation of an immunochromatographic assay for rapid multi-residues detection of cephems in milk

A one-step immunochromatographic assay (ICA) was developed for the detection of seven kinds of cephems in milk. Polyclonal antibodies (PcAb) with group-specific to cephems were raised in rabbits after immunization with cephalexin-keyhole limpet hemocyanin (KLH) conjugate. The specificity of anti-sera was determined by indirect competitive enzyme-linked immunosorbent assay (icELISA), and the 50% inhibitions (IC₅₀) of cephalexin and cefadroxil were obtained at 1.5 ng mL⁻¹; IC₅₀ of cefatiofur, cefapirin, cefazolin, cefalothin and cefotaxine were 4, 3.7, 3.2, 4.5 and 5 ng mL⁻¹, respectively. The PcAb against cephems were conjugated to colloidal gold particles as the detection reagent for ICA strips to test for cephems. This method achieved semi-quantitative detection of cephems in <5 min, with high sensitivity to cephalexin and cefadroxil (both 0.5 ng mL⁻¹). At the same time, cefatiofur, cefapirin, cefazolin, cefalothin and cefotaxine were detected at <100 ng mL⁻¹ in spiked processed-milk samples. This method was compared with an enzyme-linked immunosorbent assay by testing 40 milk samples, and the positive samples were validated by a high-performance liquid chromatographic method, with an agreement rate of 100% for both comparisons. In conclusion, the method was rapid and accurate for the multi-residue detection of cephems in milk.     

A novel electrochemical method to detect mercury (II) ions

A novel and sensitive electrochemical method for determination of mercury (II) ions (Hg²⁺) based on the formation of thymine–Hg²⁺–thymine complexes and gold nanoparticle-mediated signal amplification is reported. Two 5′ end thiolated complementary oligonucleotides containing six strategically placed thymine–thymine mistakes were introduced in this work. One of the two oligonucleotides was immobilized on a gold electrode and the other one on gold nanoparticles (AuNPs). Due to six thymine–thymine mistakes the two oligonucleotides were not able to be hybridized, so AuNPs could not be immobilized onto the electrode surface after the electrode was immersed in the DNA–AuNPs solution. However, if Hg²⁺ existed, T–Hg²⁺–T complexes could be formed and AuNPs could be immobilized onto the electrode surface. Meanwhile, large numbers of [Ru(NH₃)₆]³⁺ molecules as electrochemical species could be localized onto the electrode surface. The Hg²⁺ detection limit of this assay could be as low as 10 nM, which is the US Environmental Protection Agency (EPA) limit of Hg²⁺ for drinkable water. This method is proven to be simple, convenient, high sensitive and selective.     

Study on Biological Safety of Polyvinyl Alcohol/Collagen Hydrogel as a Tissue Substitute (II)

Physically crosslinked polyvinyl alcohol/collagen composite hydrogels were prepared by a cyclic freezing-drying technique. The biological properties of the hydrogels, including hemolysis, anaphylaxis, pyrogen and acute systemic toxicity tests and implantation in-vivo, were investigated. The hemolysis test suggested that the polyvinyl alcohol/collagen, with a hemolysis index of 1.19%, did not have an obvious hemolysis reaction. There was no toxicosis or death cases observed in the acute systemic toxicity test, and the hydrogel showed no anaphylaxis or pyrogen response. The composite hydrogel showed a good histological compatibility in the in-vivo study. The results indicated that the polyvinyl alcohol/collagen composite hydrogels have promising applications for pharmaceutical and biomedical fields.