壳聚糖／黄原胶凝胶化性能的研究

壳聚糖-黄原胶通过改变质量分数(r)制备了混合凝胶.当多糖总浓度为4%,盐离子浓度为1 mol·L-1,壳聚糖质量分数为0.7,在80℃共混并恒温30 min,可达凝胶强度(G)的最大值;研究了制备温度(TP)、恒温时间(t)、体系中盐离子浓度及壳聚糖分子量(M)与脱乙酰度(DD)对凝胶化的影响.同时从其FTIR谱图上分析了这两种多糖凝胶化的作用机理.     

NaF饮水喂养的小白鼠肝脏线粒体代谢热化学研究

利用 L KB2 2 77生物活性检测系统 ,测定了用含不同浓度 Na F饮水喂养的小白鼠肝脏线粒体代谢热曲线 ,实验表明 ,饮水中 Na F浓度增加 ,最大热功率增大 ,代谢产热增加 ,停滞期和活性维持时间缩短 .热曲线测定完毕后的样品 ATP浓度分析表明 ,随着 Na F浓度增加 ,系统的 ATP浓度降低 .结合透射电镜对肝细胞超微结构研究结果 ,根据化学渗透假说对实验结果进行了比较完满的解释     

考虑处置效果的苯系物泄露应急方案生成方法

针对苯系物泄露次生突发环境事件的应急响应问题,研究了基于案例推理和处置效果的应急方案生成方法。首先,在计算案例相似度时,为避免历史案例不全产生的情景要素遗失,基于随机森林算法,结合专家知识构建了权重求解方法,采用案例检索方法得到相似案例集;然后,构建了应急处置效果评估指标体系,以全面评价相似案例对应的处置效果;进一步,考虑多专家评价可弥补决策者知识、经验等的不足,引入了自适应群共识调整算法,得到群体评价意见,通过集结相似度与处置效果,得到了方案的综合评价值并生成最优方案;最后,用算例说明了方法的可行性和有效性。     

2-羟基-5-磺酸基苯基重氮氨基偶氮苯分光光度法测定痕量汞(Ⅱ)

研究了 2 羟基 5 磺酸基苯基重氮氨基偶氮苯 (HSDAA)与汞 (Ⅱ )的显色反应。在TritonX 10 0存在下 ,于pH 10 30的硼砂 氢氧化钠缓冲溶液中 ,汞 (Ⅱ )与试剂形成 1∶2的稳定橙红色配合物 ,其最大吸收波长位于 5 19nm处 ,表观摩尔吸光系数为 1 6 7× 10 5L·mol- 1 ·cm- 1 。汞 (Ⅱ )在 0～ 6 0 0 μg·L- 1 之间符合朗伯 比尔定律。该法直接应用于水样中痕量汞的测定。     

Observable T7 lepton flavor symmetry at the Large Hadron Collider

More often than not, models of flavor symmetry rely on the use of nonrenormalizable operators (in the guise of flavons) to accomplish the phenomenologically successful tribimaximal mixing of neutrinos. We show instead how a simple renormalizable two-parameter neutrino mass model of tribimaximal mixing can be constructed with the non-Abelian discrete symmetry T(7) and the gauging of B-L. This is also achieved without the addition of auxiliary symmetries and particles present in almost all other proposals. Most importantly, it is verifiable at the Large Hadron Collider.     

Resolution enhancement with improved range Doppler algorithm in high numerical aperture OCT

The improved range Doppler algorithm is proposed to abate the trade-off between resolutions and depth of focus in spectral domain optical coherence tomography.By considering the finite beam width and the shape of the wavefronts produced by the Gaussian beam,a physical diffraction model is presented to simulate the light propagation process in the sample.The two-dimensional processing of the spectrum data is decomposed into two one-dimensional processings of Stolt transform and matched filter.Experimental results show that image reconstruction can be achieved.The transverse and axial resolutions are both improved significantly,especially in the out-of-focus range,and the resolutions are almost equivalent throughout the entire region of interest.     

2.0μm附近模拟呼吸气体中~(13)CO_2/~(12)CO_2同位素丰度的高精度实时在线测量

采用可调谐二极管激光吸收光谱技术,结合一新型多通池搭建了一套模拟呼吸气体中CO_2同位素丰度的测量装置.气体的压强、温度和流速被很好地控制且均能保持长期的稳定性;采用三次多项式拟合光谱基线,对光谱进行归一化,很好地消除了功率变化对测量结果的影响;利用移窗-回归技术消除频率漂移对同位素丰度测量的影响.实验结果表明:移窗-回归法的引入不仅延长了系统的稳定时间,还提高了系统的测量精度;小波去噪的应用获得了比多光谱平均法高2倍的信噪比;系统的稳定时间为100 s;Kalman滤波后系统测量精度为0.067‰.     

Beam bending through compound structure with two subwavelength metallic slits in each period

To provide a more practical, easy-to-implement method to achieve directional modulation with a plasmonic lens, beam manipulation method via compound metallic gratings with two subwavelength slits filled with different dielectrics inside each period is proposed and numerically investigated by finite-difference time-domain (FDTD) method. Compared with conventional metal-grating based structures, phase retardation is tuned by the Fabry-Pérot (FP) resonant condition and light bending is achieved by constructing a carefully designed, curved phase front for the plasmonic lenses. Our designs have advantages in ease of fabrication and capability to perform in the far field. With these advantages, the designs are expected to be valuable in applications such as plasmonic circuits and photonic communication.     

Beam dynamics studies of the photo-injector in low-charge operation mode for the ERL test facility at IHEP

The energy recovery linac test facility （ERL-TF）, which is a compact ERL-FEL （free electron laser） two-purpose machine, was proposed at the Institute of High Energy Physics, Beijing. As one important component of the ERL-TF, the photo-injector that started with a photocathode direct-current gun has been designed. In this paper, optimization of the injector beam dynamics in low-charge operation mode is performed with iterative scans using Impact-T. In addition, the dependencies between the optimized beam quality and the initial offset at cathode and element parameters are, investigated. The tolerance of alignment and rotation errors is also analyzed.