Efficient synthesis of N-benzyl-3-aminopyrrolidine-2,5-dione and N-benzyl-3-aminopyrrolidin-2-one

Reaction of N-tert-butyloxycarbonylasparagine (Boc-Asn) with 2 equiv of benzyl bromide in presence of cesium carbonate led to N-benzyl-3-Boc-amino-pyrrolidin-2,5-dione 1a (N-benzyl-3-Boc-aminosuccinimide). Borane dimethylsulfide reduced 3-Boc-aminopyrrolidine-2,5-dione 1a into 3-Boc-aminopyrrolidin-2-one 2a. The same procedure could also be used to prepare derivatives 1 and 2 substituted on the aromatic ring.     

Trigonal‐Bipyramidal and Square‐Pyramidal Chromium?Manganese Chalcogenide Clusters, [E2CrMn2(CO)n]2− (E=S,Se, Te; n=9, 10): Synthesis,Electrochemistry, UV/Vis Absorption,and Computational Studies

The reactions of E powder (E=S, Se) with a mixture of Cr(CO)₆ and Mn₂(CO)₁₀ in concentrated solutions of KOH/MeOH produced two new mixed Cr? Mn? carbonyl clusters, [E₂CrMn₂(CO)₉]^2? (E=S, 1 ; Se, 2 ). Clusters 1 and 2 were isostructural with one another and each displayed a trigonal‐bipyramidal structure, with the CrMn₂ triangle axially capped by two μ₃‐E atoms. The analogous telluride cluster, [Te₂CrMn₂(CO)₉]^2? ( 3 ), was obtained from the ring‐closure of Te₂Mn₂ ring complex [Te₂Mn₂Cr₂(CO)₁₈]^2? ( 4 ). Upon bubbling with CO, clusters 2 and 3 were readily converted into square‐pyramidal clusters, [E₂CrMn₂(CO)₁₀]^2? (E=Se, 5 ; Te, 6 ), accompanied with the cleavage of one Cr? Mn bond. According to SQUID analysis, cluster 6 was paramagnetic, with S=1 at room temperature; however, the Se analogue ( 5 ) was spectroscopically proposed to be diamagnetic, as verified by TD‐DFT calculations. Cluster 6 could be further carbonylated, with cleavage of the Mn? Mn bond to produce a new arachno‐cluster, [Te₂CrMn₂(CO)₁₁]^2? ( 7 ). The formation and structural isomers, as well as electrochemistry and UV/Vis absorption, of these clusters were also elucidated by DFT calculations.     

Preparation and characterization of standard reference material 1849 infant/adult nutritional formula

Standard Reference Material (SRM) 1849 Infant/Adult Nutritional Formula has been issued by the National Institute of Standards and Technology (NIST) as a replacement for SRM 1846 Infant Formula, issued in 1996. Extraction characteristics of SRM 1846 have changed over time, as have NIST's analytical capabilities. While certified mass fraction values were provided for five constituents in SRM 1846 (four vitamins plus iodine), certified mass fraction values for 43 constituents are provided in SRM 1849 (fatty acids, elements, and vitamins) and reference mass fraction values are provided for an additional 43 constituents including amino acids and nucleotides, making it the most extensively characterized food-matrix SRM available from NIST.     

Superwetting Patterned Membranes with an Anisotropy/Isotropy Transition: Towards Signal Expression and Liquid Permeation

Superwetting membranes with responsive properties have attracted heightened attention because of their fine‐tunable surface wettability. However, their functional diversity is severely limited by the “black‐or‐white” wettability transition. Herein, we describe a coating strategy to fabricate multifunctional responsive superwetting membranes with SiO₂/octadecylamine patterns. The adjustable patterns in the responsive region are the key factor for functional diversity. Specifically, the coated part of the membrane displayed a superhydrophobicity/superhydrophilicity transition at different pH values, whereas the uncoated part exhibited invariant superhydrophilicity. On the basis of this anisotropy/isotropy transition, the membranes can serve as either responsive permeable membranes or signal‐expression membranes, thus enabling the responsive separation and permeation of liquids with satisfactory separation efficiency (>99.90 %) and flux (ca. 60 L m^?2 h), as well as real‐time liquid signal expression with alterable signals.     

Characterization and photocatalytic activity of Fe- and N-co-deposited TiO2 and first-principles study for electronic structure

Titanium dioxide (TiO₂), co-deposited with Fe and N, is first implanted with Fe by a metal plasma ion implantation (MPII) process and then annealed in N₂ atmosphere at a temperature regime of 400-600 °C. First-principle calculations show that the (Fe, N) co-deposited TiO₂ films produced additional band gap levels at the bottom of the conduction band (CB) and on the top of the valence band (VB). The (Fe, N) co-deposited TiO₂ films were effective in both prohibiting electron-hole recombination and generating additional Fe-O and N-Ti-O impurity levels for the TiO₂ band gap. The (Fe, N) co-deposited TiO₂ has a narrower band gap of 1.97 eV than Fe-implanted TiO₂ (3.14 eV) and N-doped TiO₂ (2.16 eV). A significant reduction of TiO₂ band gap energy from 3.22 to 1.97 eV was achieved, which resulted in the extension of photocatalytic activity of TiO₂ from UV to Vis regime. The photocatalytic activity and removal rate were approximately two-fold higher than that of the Fe-implanted TiO₂ under visible light irradiation.     

N-(Benzyloxycarbonyl)-L-vinylglycike Methyl Ester from L-Methionine Methyl Ester Hydrochloride

A reproducible, large scale and practical synthesis of N-(benzyloxycarbonyl)-L-vinylglycine methyl ester starting from L-methionine methyl ester hydrochloride is described.     

一种新型的含联二萘结构的手性聚芳醚酮的合成及表征

目前,对于外消旋体的拆分已经越来越引起人们的关注,在药物化学领域中尤为突出,原因是手性药物的两个对映体虽然在物理和化学性质上大多相同,但其在药效及药物动力学方面却表现出很大的差别,目前尚没有通用的手性固定相用于外消旋体的拆分,为了解决这一问题,以淀粉、纤维素以及其衍生物制备的手性固定相已被人们广泛使用。     

Detailed Structural Characterizations of SBA‐15 and MCM‐41 Mesoporous Silicas on a High‐Resolution Transmission Electron Microscope

Using high‐resolution transmission electronic micrograph (HR‐TEM) observation, one can clearly see the pore geometry of the MCM‐41 and SBA‐15 mesoporous silicas to determine that their pore shapes are hexagonal and round, respectively. With the perpendicular orientations of the nanochannels to the electron beam, parallel line images of the (100) and (110) repeating spacings were observed. In the SBA‐15 mesoporous silicas, there are byproducts of the granular silica and disordered mesostructures, attributed to the weak hydrogen interactions between Pluronic 123 blockcopolymer and the silica species. There are also many different and significant +π disclination defects in SBA‐15 and MCM‐41 surfactant‐silica composites. The SBA‐15 with a thicker silica wall is more stable under irradiation by high‐energy electron beams compared to MCM‐41, which has thinner wall thickness. Some carbon nanostructure impurities were found in some carbon films on the metal grids.     

Towards Dynamic Control of Wettability by Using Functionalized Altitudinal Molecular Motors on Solid Surfaces

We report the synthesis of altitudinal molecular motors that contain functional groups in their rotor part. In an approach to achieve dynamic control over the properties of solid surfaces, a hydrophobic perfluorobutyl chain and a relatively hydrophilic cyano group were introduced to the rotor part of the motors. Molecular motors were attached to quartz surfaces by using interfacial 1,3‐dipolar cycloadditions. To test the effect of the functional groups on the rotary motion, photochemical and thermal isomerization studies of the motors were performed both in solution and when attached to the surface. We found that the substituents have no significant effect on the thermal and photochemical processes, and the functionalized motors preserved their rotary function both in solution and on a quartz surface. Preliminary results on the influence of the functional groups on surface wettability are also described.     

Impact of an indium oxide/indium-tin oxide mixed structure for GaN-based light-emitting diodes

An interesting GaN-based light emitting diode (LED) using a 50 nm indium oxide (In₂O₃)/250 nm indium-tin oxide (ITO) mixed structure to replace the commonly used ITO (250 nm) current spreading layer is fabricated and studied. Use of the In₂O₃ layer could reduce the contact resistance of p-GaN in LEDs. In addition, this highly-resistive In₂O₃ layer, below the ITO layer could improve the current spreading performance. Experimentally, at room temperature, using this mixed structure, the luminous and EL intensities are enhanced by 17.7 and 17.1%, respectively.