1,5-bis(dicarboxymethylaminomethyl)-2,6- dihydroxynaphthalene as a selective spectrofluorimetric reagent for calcium

1,5-Bis(dicarboxymethylaminomethyl)-2,6-dihydroxynaphthalene (BDDN) forms fluorescent complexes with aluminium, barium, beryllium, calcium, magnesium and strontium. All the complexes have 2:1 metal :ligand ratios. Barium, calcium, magnesium and strontium exhibit maximal fluorescence at pH 11.7, with excitation and emission maxima at 385 and 445 nm respectively. Aluminium and beryllium show maximal fluorescence at pH 5.8 and 5.2 respectively, the excitation and emission maxima being at 370 and 405 nm. The formation of the calcium complex provides a highly sensitive and selective determination of calcium in the range 10/2-500 ng. The fluorescence measurement of calcium should be made within 5 min of mixing the solutions because of the instability of the reagent at the given pH. Potassium cyanide may be used as a masking agent and ter- or quadrivalent cations should be removed by preliminary extraction with 8-hydroxyquinoline in chloroform at pH 6.0. In such conditions, of 33 cations studied, only magnesium (>20 ng), strontium (>70 ng) and barium (>150 ng) caused interference in the determination of 300 ng of calcium. Among 16 anions examined, only EDTA interfered seriously.     

Field alpha-spectroscopy of radon (<Superscript>222</Superscript>Rn) and actinon (<Superscript>219</Superscript>Rn) progeny in soil gas: Locating a radon source

Summary The activities of²¹⁸Po,²¹⁴Po and²¹¹Bi were determined in samples obtained of soil/gas. Sampling work was taken in Jáchymov (Czech Republic) at the outcrop of the Geister-vein,by electrostatic precipitation from filtered soil gas on stainless steel disks.The samples were measured in a field laboratory using a semi-conductor alpha-spectrometer.The activities of²¹⁸Po,²¹⁴Po and²¹¹Bi were calculated.Samples taken from active dump material (near-by radon source) exhibited a high²¹¹Bi/²¹⁴Po ratio, while those of the vein outcrop (a relatively deeper source) had a low ratio.A mathematical model was employed to determine the radon age calculated from the actinon/radon input ratio.This varied in a range of 5.6 to -7.7 seconds.Negative age values are probably caused by the preference for actinon, which rapidly comes into equilibrium with the source of this gas.     

Transfer reaction of the polystyrene radical with electron-acceptor molecules of tetrachlorophthalanhydride

The transfer constants (C_s) of the polystyrene radical with some derivatives of phthalic acid have been determined. Among the agents used, tetrachlorophthalanhydride (TCPA) differs distinctly from other compounds by its value of C_s 3·1 × 10^?3 for thermal and 3·4 × 10^?3 for initiated polymerization of styrene. The values of C_s for phthalanhydride, dimethyl phthalate, and tetrachlorodimethyl phthalate are lower by two decimal orders. The considerable decrease in the degree of polymerization of styrene prepared in the presence of TCPA is mainly attributed to the increased reactivity of chlorine atoms in TCPA induced by the acceptor effect of anhydride ring. Participation of a TCPA-styrene complex in transfer reaction has been assumed but not proved.     

Polychlorinated polyamides—III. Synthesis and characterization of polyamides derived from perchloroterephthaloyl dichloride

Six new polyamides have been prepared either by polymerization in solution or by interfacial polymerization by reacting perchloroterephthaloyl dichloride with aromatic diamines. The polymers were characterized by i.r. spectroscopy, elemental analysis, DSC, and TGA. The glass transition temperature, the melting temperature, and the thermal decomposition temperature have been determined. In order to estimate the molecular weights, intrinsic viscosities were determined. Some of the polymers showed high thermal stability.     

Synthesis,characterization and a thermogravimetric study of copper,cobalt and tin mono- and bis-adducts with ethyleneurea,ethylenethiourea and propyleneurea

This paper describes the synthesis, characterization and a thermogravimetric (t.g.) study of 11 adducts of general formula MCl₂·nL (M = Cu, Co and Sn; n = 1 and 2 for Sn, and 2 for Cu and Co; L = ethyleneurea eu, ethylenethiourea etu, and propyleneurea pu). The i.r. results shows that the eu and pu adducts are coordinated through oxygen, whereas for etu nitrogen is the coordination site. The (C=O) or (C=S) trend is: Cu > Co > Sn. The t.g. curves show that the adducts release ligand molecules in a single mass loss step. As regards considering adducts with the same stoichiometry, the observed thermal stability trend is: etu > pu > eu.     

Small carbon clusters doped with early transition metals: a theoretical study of ScCn, ScCn+, and ScCn- (n = 1-8) open-chain clusters

A theoretical study of the ScCn, ScCn+, and ScCn- (n = 1-8) open-chain clusters has been carried out. Predictions for their electronic energies, rotational constants, dipole moments and vibrational frequencies have been made using the B3LYP method with different basis set including effective core potentials, ECPs. For the ScCn open-chain clusters the lowest-lying states correspond to quartet states for n-odd members, whereas for n-even species the ground state is found to be a doublet. In the cationic and anionic species, the electronic ground state is found to be a singlet for even n and a triplet for odd n. An even-odd parity effect (n-even clusters being more stable than n-odd ones) is observed in neutral and charged clusters. Ionization energies and electron affinities also exhibit a clear parity alternation trend, with n-even clusters having higher values than n-odd ones.     

Quantitative separation of zinc traces from cadmium matrices by solid-phase extraction with polyurethane foam

A system for separation of zinc traces from large amounts of cadmium is proposed in this paper. It is based on the solid-phase extraction of the zinc in the form of thiocyanate complexes by the polyurethane foam. The following parameters were studied: effect of pH and of the thiocyanate concentration on the zinc extraction, shaking time required for quantitative extraction, amount of PU foam necessary for complete extraction, conditions for the separation of zinc from cadmium, influence of other cations and anions on the zinc sorption by PU foam, and required conditions for back extraction of zinc from the PU foam. The results show that zinc traces can be separated from large amounts of cadmium at pH 3.0±0.50, with the range of thiocyanate concentration from 0.15 to 0.20 mol l⁻¹, and the shaking time of 5 min. The back extraction of zinc can be done by shaking it with water for 10 min. Calcium, barium, strontium, magnesium, aluminum, nickel and iron(II) are efficiently separated. Iron(III), copper(II) and cobalt(II) are extracted simultaneously with zinc, but the iron reduction with ascorbic acid and the use of citrate to mask copper(II) and cobalt(II) increase the selectivity of the zinc extraction. The anions nitrate, chloride, sulfate, acetate, thiosulphate, tartarate, oxalate, fluoride, citrate, and carbonate do not affect the zinc extraction. Phosphate and EDTA must be absent. The method proposed was applied to determine zinc in cadmium salts using 4-(2-pyridylazo)-resorcinol (PAR) as a spectrophotometric reagent. The result achieved did not show significant difference in the accuracy and precision (95% confidence level) with those obtained by ICP–AES analysis.     

Corpuscular diagnostics of a hollow-cathode discharge-III. The metal-ions-regime evolution

The variations in time of mass spectra of ions, extracted from the hollow-cathode discharge in the regime of the intensive sputtering of the cathode material were measured. The mass spectrum changes in time conspicuously. From the results of measurements a distinct anisotropy of ion beam is inferred. The discharge turns into a metal-ions regime.The helpful discussions with Dr. J. Musil are gratefully acknowledged.     

Periodic solutions of a nonlinear propagation equation via a fixed point argument

In this work the initial value problem for the equation $$u_t + \beta u_x + yf(u)_x - \delta u_{xxt} = g,\forall x \in R, \forall t \in [0,T],$$ with periodic boundary conditions is interpreted in the sense of periodic distributions and studied via fixed point arguments. Weak solutions exist iff∈C ⁰ (R) andg∈L ^∞(L ²(0,1)). Moreover, regularity inf, g and the initial data implies regularity of solutions.