Direct measurement of gas solubility and diffusivity in poly(vinylidene fluoride) with a high-pressure microbalance

We present solubility and diffusion data for the gases methane and carbon dioxide in the polymer poly(vinylidene fluoride). The polymer was cut from extruded piping intended for use in offshore oil and gas applications. Measurements were carried out using a purpose-built high-pressure microbalance. These properties were determined in the temperature range 80-120 °C and in the pressure range 50-150 bar for methane and 20-40 bar for carbon dioxide. In general, good agreement was obtained for similar measurements reported in the literature. Solubility follows a Henry’s law (linear) dependence with pressure. Diffusion coefficients for each of the gases in the polymer were also measured using the balance. Activation energies for diffusion and heats of solution for the two gases in the polymer were also determined.     

Solubility of gases in liquids. 18. High-precision determination of Henry fugacities for argon in liquid water at 2 to 40°C

The solubility of argon in pure liquid water was measured at ca. 100 kPa and from 2 to 40°C using an analytical method characterized by an imprecision of about ±0.05%. From the experimental results, Henry fugacities H _2,1 (T,P _s,1 ) (also known as Henry's Law constants or Henry coefficients) at the vapor pressure P _s,1 of water as well as Ostwald coefficients L _2,1 at infinite dilution were obtained. Measurements were made at roughly 0.5°C and/or 1° intervals between 2 and 8°C (region I), and at 5°C intervals above 10°C (region II). A difference plot lnH _2,1 /T suggests an unusual temperature dependence in region I, i.e., between 2 and 8°C. Because of this, the data were treated separately in two parts corresponding to these two regions. Our results are compared with the recent high-precision data of Krause and Benson (Henry fugacities), and with calorimetrically determined quantities (enthalpies and heat capacities of solution). Finally, experimental results are compared with values calculated via scaled particle theory.Communicated in part at the 2^nd International Symposium on Solubility Phenomena in Newark, New Jersey, August 12–15, 1986, and at the 4^th ISSP in Troy, New York, July 20–August 3, 1990.     

Enantioselective transition metal catalysis directed by chiral cations

Enantioselective transition metal catalysis directed by chiral cations is the amalgamation of chiral cation catalysis and organometallic catalysis. Thus far, three strategies have been revealed: ligand scaffolds incorporated on chiral cations, chiral cations paired with transition metal ‘ate’-type complexes, and ligand scaffolds incorporated on achiral anions. Chiral cation ion-pair catalysis has been successfully applied to alkylation, cycloaddition, dihydroxylation, oxohydroxylation, sulfoxidation, epoxidation and C–H borylation. This development represents an effective approach to promote the cooperation between chiral cations and transition metals, increasing the versatility and capability of both these forms of catalysts. In this review, we present current examples of the three strategies and suggest possible inclusions for the future.

Enantioselective transition metal catalysis directed by chiral cations is the amalgamation of chiral cation catalysis and organometallic catalysis.     

Photogeneration and quenching of reactive oxygen species by urocanic acid

Urocanic acid, UCA, is characterized by two electronic transitions in the UV-B (280-320 nm) which comprise its broad absorption spectrum and give rise to wavelength-dependent isomerization quantum yields. The absorption spectrum of UCA extends into the UV-A (320-400 nm). Given the UV-A component of sunlight is significantly greater than the UV-B component it is hypothesized even weak UV-A photochemistry of UCA could be important for in vivo responses to UV radiation. Degenerate pump-probe experiments performed on t-UCA at several wavelengths in the UV-A reveal an excited-state absorption that undergoes a rapid, approximately 1 ps decay. Photoacoustic experiments performed on both the cis and trans isomers reveal the formation of a long-lived intermediate following UV-A excitation. The efficiency and action spectra for this latter photoactive process are presented and are similar for both isomers of UCA. Cholesterol hydroperoxide assays designed to investigate the nature of the UV-A photoreactivity of t-UCA confirm the production of reactive oxygen species. The bimolecular rate constant for the quenching of singlet oxygen by t-UCA is determined to be 3.5 x 10(6) M(-1) s(-1). Taking into consideration recent theoretical calculations and jet expansion studies of the electronic structure of gas-phase t-UCA, a model is proposed to explain the isomerization and photoreactivity of t-UCA in solution over the UV-A region.     

Effect of mobile phase acidic additives on enantioselectivity for phenylalanine analogs

The use of acidic mobile phase additives allows the chiral separation of underivatized phenylalanine analogs on a common amylosic column. In addition to decreasing retention and band-broadening arising from non-ideal interactions, acidic additives may also increase selectivity. This appears to be due to the minimization of non-selective binding in the recognition site. Effects of the additives are related to additive pKa and size. Ethanesulfonic acid was typically the most effective additive with trifluoroacetic acid being one of the least effective.     

Cu-Zn-Sn体系富Sn区液相限的研究

近些年来,无铅低熔点填料日渐引起人们的兴趣,且将得到广泛的应用。Cu-Zn-Sn合金正是无铅低熔点填料的一种基本合金。该体系相图虽有一些报道,但他们的研究只涉及富铜区(>50Wt％)的液相限和等温截面(500℃)。我们颇感兴趣的富Sn区的液相限,尚未见文献报道,因此测定该体系富Sn区的液相限是必要的。关于Cu-Zn-Sn体系的三个相关二元体系,已有文献报道,也较成熟。对于Cu-Zn体系,富Zn区600℃以下存在两个转熔反应,其转熔点分别为Q(～88Wt％Zn,598℃),W(97.5-98.5Wt％Zn,424℃);Cu-Sn体系富Sn区有一个转熔反应,其转熔点     

Elastic behavior of non-Gaussian polymethylene chains

In this paper, elastic behaviors of non-Gaussian polymethylene (PM) chains with chain length N=100 are investigated by rotational isomeric state model. Here the tetrahedral lattice of PM chain and the non-local interaction of Sutherland potential are adopted. In the metropolis movement of PM chain, a four-bond movement model is used. The average energy and average Helmholtz free energy with various elongation ratios λ are calculated by Monte Carlo simulation method. The average energy increases with elongation ratio λ and the average Helmholtz free energy decreases with elongation ratio λ. The elastic force f and the energy contribution to elastic force f_u can be obtained from f=∂〈A〉/∂r and f=∂〈U〉/∂r. We find that the elastic force f increases with elongation ratio λ and the energy contribution f_u decreases with elongation ratio λ, and f_u is less than zero. The ratio f_u/f is close to −0.21 for λ?1.25, and −0.04 to −0.35 for λ>1.25 at T=364 K. In our calculation, the rubber elasticity may be discussed in terms of the chemical structure of polymer chains.     

Impact of azaproline on Peptide conformation

The amino acid analog azaproline (azPro) contains a nitrogen atom in place of the C(alpha) of proline. Peptides containing azPro were shown to stabilize the cis-amide conformer for the acyl-azPro bond and prefer type VI beta-turns both in crystals and in organic solvents by NMR. The increased stability for cis-amide conformers was relatively minor with respect to the trans-conformers. Further, their conformational preferences were depended on solvent. To elucidate the impact of azPro substitution on amide cis-trans isomerism and peptide conformation, this paper reports ab initio studies on azPro derivatives and a comparison with their cognate Pro derivatives: 1-acetyl-2-methyl pyrrolidine (1), 1-acetyl-2-methyl pyrazolidine (2), Ac-Pro-NHMe (3), Ac-azPro-NHMe (4), Ac-azPro-NMe(2) (5), Ac-azAzc-NHMe (6), and Ac-azPip-NHMe (7). Conformational preferences were explored at the MP2/6-31+G** level of theory in vacuo. Solvation effects for 1 and 2 were studied implicitly using the polarizable continuum model and explicitly represented by interactions with a single water molecule. An increase in the conformational preference for the cis-amide conformer of azPro was clearly seen. An intramolecular hydrogen bond occurred solely in the trans-amide conformer that reduced the preference for the cis-conformer by 2.2 kcal/mol. The larger ring homolog aza-pipecolic acid (azPip), in which this internal hydrogen bond was diminished, significantly augmented stabilization of the cis-amide conformer. In aqueous solution, the preference for the cis-amide conformers was greatly reduced, mainly as a result of interaction between water and the lone pair of the alpha-nitrogen in the trans-amide conformer that was 3.8 kcal/mol greater than that in the cis-conformer. In the azPro analog, the energy barrier for cis-trans amide isomerization was 6 kcal/mol less than that in the cognate Pro derivative. Because the azPro derivatives can stabilize the cis-amide bond and mimic a type VI beta-turn without incorporation of additional steric bulk, such a simple chemical modification of the peptide backbone provides a useful conformational constraint when incorporated into the structure of selected bioactive peptides. Such modifications can scan receptors for biological recognition of reverse turns containing cis-amide bonds by the incorporation of type VI beta-turn scaffolds with oriented appended side chains.     

Study on open tubular capillary affinity liquid chromatography

A novel mode of affinity chromatography (AC) based on an open tubular capillary column (OTAC) is demonstrated. The OTAC column is prepared by immobilizing Cibacron blue F3GA onto the inner surface of a 50-microm-i.d. capillary column. The AC experiment is performed on a capillary electrophoresis instrument by using its pressure system as the driving force. Bovine serum albumin and lysozyme (Lys) are successfully separated with stepwise gradient elution. The relative standard deviation (RSD) for the elution time of the retained Lys is 0.08%, and good repeatability of its peak area and peak height with an RSD value lower than 2.12% for 10 consecutive runs is observed. The loading capacity and detection limit for the retained Lys are approximately 36 ng and 8.6 ng, respectively. It is also found that the amount of protein adsorbed is unaffected by the flow rate of the loading buffer, and OTAC can be used for the fast determination of biopolymers. Some of the advantages of OTAC over conventional modes of open tubular capillary liquid chromatography are that the detection sensitivity and loading capacity of a sample can be greatly improved, because the relatively large inner diameter of the capillary can be adopted and the whole capillary column can be used to adsorb the solute in OTAC.