Synthesis of LiNi1/3Co1/3Mn1/3O2 cathode material by a modified sol–gel method for lithium-ion battery

LiNi_1/3Co_1/3Mn_1/3O₂ was prepared by a modified sol–gel method, selecting ethylene diamine tetraacetic acid and citric acid as the co-chelating agent. The mole ratios of ethylene diamine tetraacetic acid (EDTA) to metal ion (Mⁿ⁺) were 0:1, 1:1 and 2:1. The obtained samples were characterized by XRD, BET and SEM. The XRD showed that LiNi_1/3Co_1/3Mn_1/3O₂ had good crystallinity and well-ordered layered structure. After calcined at 850 °C, the LiNi_1/3Co_1/3Mn_1/3O₂ particles exhibited a three-dimensional space network structure, which was greatly correlated with the ratio of EDTA to metal ion. The LiNi_1/3Co_1/3Mn_1/3O₂ obtained from a mole ratio of 1:1 (EDTA:Mⁿ⁺) had the best electrochemical performance. The reversible capacities were reached 168 and 100 mAh/g at 1C and 10C discharge rate, respectively. The result of the cycling performance showed a high capacity maintenance ratio of 89.3 % at 1C and 25 °C after 50 cycles. The further electrochemical performance was evaluated by electrochemical impedance spectroscopy and cyclic voltammetry.     

From Nitro‐ to Sulfonyl‐Based Chromophores: Improvement of the Comprehensive Performance of Nonlinear Optical Dendrimers

Through the combination of the divergent and convergent approaches, coupled with the utilization of the powerful Sharpless “click‐chemistry” reaction, two series of sulfonyl‐based high‐generation NLO dendrimers were conveniently prepared with high purity and in satisfactory yields. Thanks to the perfect three‐dimensional (3D) spatial isolation from the highly branched structure and the isolation effect of the exterior benzene moieties and the interior triazole rings, these dendrimers exhibited large second harmonic generation coefficient (d₃₃) values up to 181 pm V^?1, which, to the best of our knowledge, is the highest value so far for polymers containing sulfonyl‐based chromophore moieties. Meanwhile, compared with the nitro‐chromophore‐based analogues, their optical transparency and NLO stability were improved in a large degree, due to the lower dipole moment (μ) and the special main‐chain structure of sulfonyl‐based chromophore in these dendrimers.     

Preparation and characterization of ZrCO/C composite aerogels

Zr-containing organic aerogels were synthesized by ligand substitution reaction of polyzirconoxone and 2, 4-dihydroxybenzoic acid, followed by polymerization with formaldehyde, and then supercritical drying using CO₂. After carbonization and carbothermal reduction under an argon atmosphere, ZrCO/C composite aerogels with controllable zirconium content (47.8–78.6 wt%) were obtained. The carbothermal reduction was substantially completed at 1,500 °C, and the obtained ZrCO/C composite aerogels exhibit low oxygen contents (9.4–6.7 wt%) and high surface areas (589–147 m²/g). Pore morphologies of the ZrCO/C composite aerogels were investigated in detail by nitrogen sorption measurements, scanning electron microscopy and its associated energy-dispersive X-ray microanalysis measurements. The results show that the aerogels are composed of carbon framework and Zr-conglomerations, and the surface area of aerogel is severely affected by its zirconium content. The presence of reductive ZrC crystals can greatly enhance the oxidation resistance ability of amorphous carbon framework and prevent collapse.     

EXAFS and DFT studies of microscopic structure with different density upon Zn(II) adsorption on anatase TiO2

Microscopic structures of Zn(II) adsorbed on anatase TiO₂ surface with different densities were studied using extended X-ray absorption fine structure (EXAFS) spectroscopy and density functional theory (DFT) calculation. Quantitative analysis of the EXAFS spectra showed that microscopic structures of Zn(II) were fourfold coordinated complexes, and different microscopic structures were present of the solid surface. Three modes of corner–corner/sharing-corner/sharing-edge adsorptions on anatase (101) face cluster were calculated by the DFT method. The results from DFT method were consistent with the EXAFS fittings. The optimized Zn–O average distance of the Zn–O tetrahedron was determined as about 2.00 Å. The Zn–Ti distance was 3.69 Å for the corner–corner adsorption, 3.35 Å for the sharing-corner adsorption, and 3.02 Å for the sharing-edge adsorption. According to the adsorption energies calculated by the DFT method, the microscopic structure of corner–corner adsorption was less stable than those of the other adsorption modes. With the increasing adsorption density, the corner–corner adsorption mode would be enhanced more intensively than the other adsorption modes.     

Deformations of Charged Axially Symmetric Initial Data and the Mass–Angular Momentum–Charge Inequality

We show how to reduce the general formulation of the mass–angular momentum–charge inequality, for axisymmetric initial data of the Einstein–Maxwell equations, to the known maximal case whenever a geometrically motivated system of equations admits a solution. It is also shown that the same reduction argument applies to the basic inequality yielding a lower bound for the area of black holes in terms of mass, angular momentum, and charge. This extends previous work by the authors (Cha and Khuri, Ann Henri Poincaré, doi: 10.1007/s00023-014-0332-6, arXiv:1401.3384, 2014), in which the role of charge was omitted. Lastly, we improve upon the hypotheses required for the mass–angular momentum–charge inequality in the maximal case.     

A turn-on and reversible fluorescence sensor with high affinity to Zn in aqueous solution

A new simple receptor 1 based on aminosalicylimine was prepared. It exhibited an ‘off–on fluorescence type’ mode with high sensitivity in the presence of Zn²⁺. In particular, this chemosensor could clearly distinguish Zn²⁺ from Cd²⁺. Also, it could be a reusable chemosensor because the addition of EDTA quenched the fluorescence of the Zn²⁺-2·1 complex. Furthermore, receptor 1 had a sufficiently low detection limit (68 nM) in aqueous solutions, which implies that 1 could sense the nanomolar concentration of Zn²⁺. Therefore, this sensor has the ability to be a practical system for the monitoring of Zn²⁺ concentrations in aqueous samples.     

Synthesis and application of moisture-stable methallylsilanated phosphorylcholine as a surface modifier

New methallylsilanated phosphorylcholine (MASPCs) were synthesized via a copper-catalyzed ‘click’ reaction and demonstrated excellent moisture stability. Hydroxylated silicon compounds, silanol, and silica were grafted or modified by MASPCs in the presence of triflic acid (TfOH) and they possessed a good grafting efficiency and high loading rate.     

Total synthesis of Daphnodorin A

A total synthesis of Daphnodorin A, a member of the Daphnodorins, was accomplished. Key features of the synthetic strategy include construction of 2-substituted-3-functionalized benzofuran via intramolecular Heck reaction and a mild Barton–McCombie deoxygenation process mediated by triethylborane. The total synthesis provided Daphnodorin A in 19.7% or 5.6% overall yield over 7 or 15 steps.