Thermodynamic Resolution of Pharmaceutical Precursor Modafinil Acid on the Basis of Chiral-at-Metal Strategy

Main observation and conclusion Chiral-at-metal strategy was developed to resolve the essential sulfoxide pharmaceutical intermediates R-modafinil acid and its ...     

快脉冲直线变压器驱动源模块的原理及实验

 介绍了直线型变压器驱动源（LTD）产生快脉冲的基本原理及技术优势,阐述了快脉冲LTD模块设计的要点,设计了输出脉冲上升时间小于100 ns的快脉冲LTD模块,并进行了初步的实验研究。实验得到该LTD模块充电±16 kV时,短路放电的电流峰值为23.7 kA,电流振荡1/4周期为69.6 ns;充电±50 kV驱动0.85 Ω负载时,电流峰值为41.4 kA,上升时间为36.8 ns（10%~90%）和60.8 ns（0~100%）。     

双层钙钛矿La1.8Ca1.2Mn2O7磁性相关I-V非线性与电输运性质

采用传统固相反应法制备了双层钙钛矿结构锰氧化物La_1.8Ca_1.2Mn₂O₇陶瓷,并用X射线粉末衍射法,扫描电镜,HL5500PC Hall效应分析仪和综合物性测量系统(PPMS)对其磁、电性质进行了表征.结果表明:经过两次高温烧结可合成具有双层Sr₃Ti₂O₇型四方结构的La_1.8Ca_1.2Mn_2<     

a-C:F薄膜的热稳定性与光学带隙的关联

以CF4和C6H6的混合气体作为气源,在微波电子回旋共振化学气相沉积(ECRCVD)装置中制备了氟化非晶碳薄膜(aC:F),并在N2气氛中作了退火处理以考察其热稳定性.通过傅里叶变换红外吸收谱和紫外可见光谱获得了薄膜中CC双键的相对含量和光学带隙,发现膜中CC键含量与光学带隙之间存在着密切的关联,在高微波功率下沉积的氟化非晶碳膜具有低的光学带隙和较好的热稳定性. 关键词： 氟化非晶碳膜 光学带隙 退火温度 热稳定性     

The local field effects in resonance Raman scattering Structural anisotropy studies in some nematic cyanophenyl derivatives

Abstract

Different methods for the determination of the local field anisotropy in liquid crystals are analysed and the problems resulting from their application are outlined. One such method, namely that based on the comparison of the polarization of resonance Raman scattering and absorption bands is studied in more detail. The method is applied to determine the structural anisotropy for the 4-n-pentyl-(4′-cyanophenyl) derivatives of benzene, cyclohexane and bicyclooctane. To account for the difference between the optical properties of the probe and of the solvent at the wavelength of the scattered light the local field factor is treated theoretically within the framework of an anisotropic continuous dielectric medium.     

Alkali-treated Si nanowire array for improving solar cell performance

The Si nanowire array (SiNWA) was achieved by metal-assisted etching. The effect of alkali-treating of SiNWA on the photovoltaic performance of solar cells was investigated. We found that the post-chemical treatment of SiNWA on solar cells could reduce (i) the surface reflection and (ii) the thickness of “dead layer” so that the short-wavelength spectral response is enhanced. As a result, a solar-spectrum-averaged reflectance of less than 3 % has been reached, a 3-fold enhancement on the spectral response of post-treated SiNWA cell at the wavelength of 400 nm has been observed, together resulting in a remarkable improvement of 45 % in the conversion efficiency.     

Design and Synthesis of a Ruthenium(II) Complex-Based Luminescent Probe for Highly Selective and Sensitive Luminescence Detection of Nitric Oxide

Nitric oxide (NO) is one of the most important intercellular signaling molecules, and plays important roles in various biological systems. In this work, a unique Ru^II complex, tris[(5-(4-methylamino-3-aminobenzylamino)-1,10-phenanthroline)] ruthenium(II) hexafluorophosphate [Ru(MAA-phen)₃][PF₆]₂, has been designed and synthesized as a luminescent probe for the detection of NO in aqueous media. The complex itself is almost non-luminescent, but can specifically react with NO under the aerobic conditions to afford its highly luminescent triazole derivative in aqueous media, [Ru(MTA-phen)₃]²⁺ (MTA-phen: methyl-trazolebenzylamino-1,10-phenanthroline), accompanied by a 302-fold increase in luminescence intensity at 598 nm with a 130 nm Stokes shift. The luminescence response of [Ru(MAA-phen)₃]²⁺ to NO is rapid, highly specific without interferences of other reactive oxygen/nitrogen species, and highly stable against the pH changes in the range of pH 4.5–9.5. These features enable [Ru(MAA-phen)₃]²⁺ to be used as a probe for the highly selective and sensitive luminescence detection of NO in weakly acidic, neutral, and weakly basic media.     

Fabrication of rhenium Josephson junctions

Rhenium is a superconductor with a relatively weak tendency to oxidize, which is advantageous in superconducting quantum circuit and qubit applications. In this work, Re/A1-A1Ox/Re Josephson tunnel junctions were fabricated using a selective film-etching process similar to that developed in Nb trilayer technology. The Re films had a superconducting transition temperature of 4.8 K and a transition width of 0.2 K. The junctions were found to be highly reproducible using the fabrication process and their characteristics had good quality with a low leakage current and showed a superconducting gap of 0.55 meV.     

CPT symmetry in honeycomb lattices and quantum brachistochrone problem

In this paper, we have provided a matrix Hamiltonian model for honeycomb lattices and subsequently obtained the dispersion relation. Furthermore, we have constructed the C operator for the given non-Hermitian Hamiltonian model. The quadratic surfaces are sketched and the quantum Brachistochrone problem is discussed for the given honeycomb lattice model.