Synthesis, crystal structure, and structural conversion of Ni molybdate hydrate NiMoO4·nH2O

The synthesis and crystal structure of NiMoO₄·nH₂O were investigated. The hydrate crystallized in the triclinic system with space group P−1, Z=4 with unit cell parameters of a=6.7791(2) Å, b=6.8900(2) Å, c=9.2486(2) Å, α=76.681(2)°, β=83.960(2)°, γ=74.218(2)°. Its ideal chemical composition was NiMoO₄·3/4H₂O rather than NiMoO₄·1H₂O. Under hydrothermal conditions the hydrate turned directly into α-NiMoO₄ above 483 K, giving nanorods thinner than the crystallites of the mother hydrate. On the other hand, it turned into Anderson type of polyoxomolybdate via a solid-solution process in a molybdate solution at room temperature.     

Mono-aromatic ring-fused versus adjacently di-aromatic ring-fused tetraazaporphyrins: regioselective synthesis and their spectroscopic and electrochemical properties

A method which preferentially produces adjacently di-aromatic ring-substituted tetraazaporphyrins (TAPs) has been developed, and their electrochemical and spectroscopic properties have been studied and compared with those of the corresponding series of mono-aromatic ring-fused TAPs. Mono-aromatic ring-fused TAPs show a split Q-band, and the splitting energy increases with increasing size of the aromatic ring. In addition, for the split Q-bands, the relative intensity of the band at longer wavelength decreases with increasing molecular size of the fused aromatics, compared with the shorter wavelength band. In the di-aromatic ring-fused TAPs, this kind of splitting is not seen, and only a shift of the band is observed. The intensity and band position of the split or unsplit Q-bands are quantitatively evaluated by simultaneous band deconvolution analysis, using both electronic absorption and magnetic circular dichroism spectra. The preparation of these TAP compounds has made it possible to adjust the Q-band position in a stepwise manner between ca. 600 and 750 nm. The first reduction and oxidation potentials of the TAP ring shift negatively with increasing number and size of the fused aromatics. The extent of the shift is found to be very small for the LUMOs but significant for the HOMOs. These spectroscopic and electrochemical properties are almost perfectly reproduced by molecular orbital calculations within the framework of the Pariser-Parr-Pople approximation. In particular, a small variation of the LUMO level and large destabilization of the HOMO level on ring expansion are rationalized from the extent of stretch of molecular orbitals: i.e., since the LUMOs are localized in the central TAP moiety irrespective of the molecular size, while the HOMOs have appreciable coefficients even over the fused aromatics, the HOMO level destabilizes while the LUMO level remains constant with increasing molecular size. In one CoTAP derivative, Co(III/II) and the first ligand oxidation couples occur experimentally at the same potential.     

Origin of the stability of Ge(105) on si: a new structure model and surface strain relaxation

The structure of Ge(105)-(1 x 2) grown on Si(105) is examined by scanning tunneling microscopy (STM) and first-principles calculations. The morphology evolution with an increasing amount of Ge deposited documents the existence of a tensile surface strain in Si(105) and its relaxation with increasing coverage of Ge. A detailed analysis of high-resolution STM images and first-principles calculations produce a new stable model for the Ge(105)-(1 x 2) structure formed on the Si(105) surface that includes the existence of surface strain. It corrects the model developed from early observations of the facets of "hut" clusters grown on Si(001).     

Characterization of diene polymers. I. Infrared and NMR studies: Nonadditive behavior of characteristic infrared bands

Extinction coefficients of the characteristic infrared bands due to isomeric structural units were measured for polybutadiene and polyisoprene in CS₂ or CCl₄ solutions and were compared with the isomer composition determined by NMR. The NMR signal assignments were made on the basis of the spectra of deutero derivatives of the polymers. In the case of polyisoprene, linear relations were obtained between the extinction coefficients and the isomer contents determined by NMR for the absorption bands at 1385 cm^?1 (characteristic of trans-1,4 units), 1376 cm^?1 (cis-1,4 units), and 889 cm^?1 (3,4 units). However, for the absorption bands at 840 cm^?1 (characteristic of cis-1,4 and trans-1,4 units), isomerized polyisoprenes did not give such a linear relationship. In polybutadiene, the extinction coefficient for the atactic 1,2 units was found to be lower than that of the syndiotactic 1,2 unit. These experimental facts lead to the conclusion that additivity of the extinction coefficients does not always hold for diene polymers. The deviation from the linear relation may be associated with regular sequences of one isomeric conformation in the chain.     

Hydrogen-induced instability of the Ge(105) surface

The structure and stability of the hydrogen-terminated (105) surface of Ge deposited on Si(105) substrates are investigated by scanning tunneling microscopy (STM). Investigations combining STM, electron energy loss spectroscopy, and theory reveal that Si incorporation into the surface Ge layer of hydrogen-terminated Ge/Si(105) drastically destabilizes the surface. The STM images obtained on this surface are well explained by the recently established rebonded-step structure model.     

Measurement of Cu K-shell and Ag L-shell ionization cross sections by low-energy positron impact

Inner shell ionization cross sections by low-energy positron impact have been measured. Development of an x-ray detector with thin Si(Li) crystals has enabled the first measurements of the absolute cross sections for the positron impacts in the energy range below 30 keV. Threshold behavior of the measured cross sections for the Cu K shell and Ag L shell are compared with the theoretical results of Gryzinski and Kowalski [Phys. Lett. A 183, 196 (1993)]] and Khare and Wadehra [Can. J. Phys. 74, 376 (1996)]]. Good agreement has been found for the Cu K shell, while the experimental values for the Ag L shell were found to be smaller than the corresponding theoretical results.     

Photodecarbonylation of ruthenium carbonyl octaethylporphyrin via stepwise two-photon absorption of visible light

The photoinduced decarbonylation of a ruthenium(II) carbonyl octaethylporphyrin (RuOEP(CO)(Py)) complex has been shown to occur upon nanosecond pulse laser irradiation as a visible light excitation source, which is reasonably interpreted by a stepwise two-photon absorption process.