The Effect of Viscosity on the Diffusion and Termination Reaction of Organic Radical Pairs

The effect of viscosity on the diffusion efficiency (F_dif) of an organic radical pair in a solvent cage and the termination mechanism, that is, the selectivity of disproportionation (Disp) and combination (Comb) of the geminated caged radical pair and the diffused radicals encountered, were investigated quantitatively by following the photolysis of dimethyl 2,2′-azobis(2-methylpropionate) (V-601) in the absence and presence of PhSD. F_dif and Disp/Comb selectivity outside the cage [Disp_(dif)/Comb_(dif)] are highly sensitive to the viscosity. In contrast, the Disp/Comb selectivity inside the cage [Disp_(cage)/Comb_(cage)] is rather insensitive. The difference in viscosity dependence between Disp_(cage)/Comb_(cage) and Disp_(dif)/Comb_(dif) is explained by the spin state of the radical pair inside and outside the cage and the spin state dependent configurational changes of the radical pair upon their collision. Given that the configurational change of the radicals associates the displacement and reorganization of solvents around the radicals, the termination outside the cage, which requires larger change than that inside the cage, is highly viscosity dependent. Furthermore, while the bulk viscosity of each solvent shows good correlation with F_dif and Disp/Comb selectivity, microviscosity is the better parameter predicting F_dif and Disp_(dif)/Comb_(dif) selectivity regardless of the solvents.     

Generalized Longo–Rehren Subfactors and α-Induction

We study the recent construction of subfactors by Rehren which generalizes the Longo–Rehren subfactors. We prove that if we apply this construction to a non-degenerately braided subfactor N⊂M and α^±-induction, then the resulting subfactor is dual to the Longo–Rehren subfactor M⊗M ^opp⊂R arising from the entire system of irreducible endomorphisms of M resulting from α^plusmn;-induction. As a corollary, we solve a problem on existence of braiding raised by Rehren negatively. Furthermore, we generalize our previous study with Longo and Müger on multi-interval subfactors arising from a completely rational conformal net of factors on S ¹ to a net of subfactors and show that the (generalized) Longo–Rehren subfactors and α-induction naturally appear in this context. Received: 11 September 2001 / Accepted: 7 October 2001     

A new fluorescent probe for zinc(II): an 8-hydroxy-5-N,N-dimethylaminosulfonylquinoline-pendant 1,4,7,10-tetraazacyclododecane

A new fluorescent probe for Zn2+, namely, 8-hydroxy-5-N,N-dimethylaminosulfonylquinolin-2-ylmethyl-pendant cyclen (L8), was designed and synthesized (cyclen=1,4,7,10-tetraazacyclododecane). By potentiometric pH, 1H NMR, and UV spectroscopic titrations, the deprotonation constants pKa1-pKa6 of L(8)4 HCl were determined to be <2, <2, <2 (for amino groups of the cyclen and quinoline moieties), 7.19+/-0.05 (for 8-OH of the quinoline moiety), 10.10+/-0.05, and 11.49+/-0.05, respectively, at 25 degrees C with I=0.1 (NaNO3). The results of 1H NMR, potentiometric pH, and UV titrations, as well as single-crystal X-ray diffraction analysis, showed that L8 and Zn2+ form a 1:1 complex [Zn(H-1L8)], in which the 8-OH group of the quinoline ring of L8 is deprotonated and coordinates to Zn2+, in aqueous solution at neutral pH. On addition of one equivalent of Zn2+ and Cd2+, the fluorescence emission of L8 (5 microM) at 512 nm in aqueous solution at pH 7.4 [10 mM HEPES with I=0.1 (NaNO3)] and 25 degrees C increased by factors of 17 and 43, respectively. We found that the cyclen moiety has the unique property of quenching the fluorescence emission of the quinolinol moiety when not complexed with metal cations, but enhancing emission when complexed with Zn2+ or Cd2+. In addition, the Zn2+-L8 complex [Zn(H-1L8)] is much more thermodynamically and kinetically stable (Kd{Zn(H-1L8)}=[Zn2+]free[L8]free/[Zn(H-1L8)]=8 fM at pH 7.4) than the Zn2+ complexes of our previous Zn2+ fluorophores ([Zn(H-1L2)] and [Zn(L3)]). Furthermore, formation of [Zn(H-1L8)] is much faster than those of [Zn(H-1L2)] and [Zn(L3)]. The staining of early-stage apoptotic cells with L8 is also described.     

Reaction of the acetals with TESOTf-base combination; speculation of the intermediates and efficient mixed acetal formation

We report here unexpected highly chemoselective deprotection of the acetals from aldehydes. Treatment of acetal compounds from aldehydes with TESOTf-2,6-lutidine or TESOTf-2,4,6-collidine in CH2Cl2 at 0 degrees C followed by H2O workup at the same temperature caused the conversion of the acetal functions to aldehyde functions. The reaction had generality and was applied to many acetal compounds. Study using various bases revealed the reaction and reached the best combination of TESOTf-base. It was very mild and highly chemoselective and proceeded under weakly basic conditions. Then, many functional groups such as allyl alcohol, silyl ether, acetate, methyl ether, triphenylmethyl (Tr) ether, 1,3-dithiolane, methyl ester, and tert-butyl ester could survive under these conditions. Furthermore, this methodology could selectively deprotect the acetals in the presence of ketals as the most characteristic feature, although this chemoselectivity is difficult to achieve by other previously reported methods. A detailed study of the reaction including MS and NMR studies revealed the reaction mechanism for determining the structures of the intermediates, pyridinium-type salts. These intermediates had a weak electrophilicity and were successfully applied to the efficient formation of the mixed acetals in high yields.     

Separation of thiosulfate and the polythionates in gold thiosulfate leach solutions by capillary electrophoresis

A technique for the separation of thiosulfate (S(2)O(3) (2-)), polythionates (S(x)O(6) (2-), x = 3 to 5) and the gold(I) thiosulfate complex (Au(S(2)O(3))(2) (3-)) using capillary electrophoresis with simultaneous UV detection at 195 and 214 nm is presented. The five species were separated in under 3 min with a total analysis time of 8 min, using an electrolyte containing 25 mM 2,2-bis(hydroxymethyl)-2,2',2"-nitrilotriethanol (bis-tris) adjusted to pH 6.0 with sulfuric acid and an applied voltage of -30 kV. While the gold(I) thiosulfate complex could be separated from the other analytes of interest under these conditions, the quantification of this complex was not possible due to inconsistent peak areas and peak splitting effects induced by the sulfur-oxygen species in the leach matrix. Detection limits calculated for 3s pressure injection at 50 mbar ranged between 0.5-2 microM. The method was linear over the ranges 40-8000, 10-2000, 10-2000, and 5-2000 microM for thiosulfate, trithionate, tetrathionate, and pentathionate, respectively. The technique was applied successfully to leach liquors containing 0.5 M ammonium thiosulfate, 2 M ammonia, 0.05 M copper sulfate and 20% w/v gold ore, diluted 1:100 prior to analysis.     

Concise total synthesis of (-)-spongotine A

The first asymmetric total synthesis of spongotine A is described. The oxidative synthesis of the imidazoline/ketone unit from keto aldehyde and diamine is a key step in this synthesis. The absolute stereochemistry of the asymmetric center of natural spongotine A is revealed as the (S)-configuration.     

Strength characteristics of the self-sustained wave in grooved channels with different groove length

The self-sustained oscillations arising in a series of grooved channels are investigated experimentally. Pressure drop, time-averaged and time-various local pressure in the grooved channels with six kinds of groove length are measured with the differential transducer and the pressure sensor, respectively, and the flow structures are visualized using the aluminum dust method. The local pressure signal shows that the self-sustained wave appears in the first or second frequency, and the Strouhal number, based on the nature frequency of the self-sustained wave, is almost equivalent for the first or second frequency in the same channel. Meanwhile, the Strouhal number for each channel decreases monotonously with the groove length. Furthermore, it is found that increasing pressure will result in higher amplitude of the self-sustained wave, this behavior is significant for the efficient heat transfer in practical engineering.     

Anionic ring-opening polymerization behavior of trans-cyclohexene carbonate using metal tert-butoxides: Construction of living anionic ring-opening polymerization by lithium tert-butoxide

Anionic ring-opening polymerization (ROP) behavior of trans-cyclohexene carbonate (CHC) using metal alkoxides as initiators was investigated. As a result, lithium tert-butoxide-initiated ROP of CHC with a high-monomer concentration (10 M) at low temperature (−15 to −10°C) proceeded to afford a poly(trans-cyclohexene carbonate) (PCHC) without undesired side reactions such as mainly backbiting. The suppression of side reactions enables the control of the molecular weight (M_n = 2400–6100) of PCHC with low molar-mass dispersity values (M_w/M_n = 1.16–1.22). Furthermore, by increasing the feed ratio of the monomer to the initiator, the molecular weight increases proportionally, indicating a controllable polymerization. The results of a matrix-assisted laser desorption/ionization time-of-flight mass spectrometry analysis, a kinetic study, and a chain extension experiment suggested a living nature of this ROP using lithium tert-butoxide.     

Regiospecific cycloaddition reactions using functionalized isoprenylsilane and related compounds

1-Alkoxy-3-trimethylsilylmethyl- and 1-alkoxy-3-trimethylsilyl-l,3-butadienes ($\text{1}$) were newly prepared. The cycloaddition reactions of $\text{1}$ with various dienophiles including heterodienophiles were found to proceed very smoothly in a perfectly regiospecific mode.