Studies on sustained-release suppositories. III. Rectal absorption of morphine in rabbits and prolongation of its absorption by alginic acid addition

Rectal absorption of morphine from various kinds of suppository bases was investigated. The extent of bioavailability of morphine by rectal administration varied with the bases used (30.5-97.5%), but every value was higher than that in the case of oral administration (13.5%). Witepsol bases were preferable to macrogol base for the rectal absorption of morphine. In particular, Witepsol S-55 or W-35 gave a higher plasma peak level than H-15 or E-75, whereas the difference in the mean residence times obtained from these bases could not be regarded as significant. Sustained-release suppositories of morphine could be prepared simply by mixing alginic acid (Alg) with morphine in a suppository base. Further, prolonged rectal absorption could be obtained by using these sustained-release suppositories, and the absorption rate was controlled by the amount of Alg added. It seems likely that the sustained release was due to the binding of morphine to Alg from the results of partition coefficient and binding ratio measurements in aqueous solution. The rapid initial absorption and the subsequent prolonged absorption of morphine simultaneously obtained from the morphine-Alg suppository may be useful in the clinical context.     

Preparation and properties of polyamides and polymides containing bibenzyl,stilbene, and tolan structures

Polyisophthalamides and polyterephthalamides were prepared by the solution polycondensation of the corresponding diacyl chlorides with 4,4′-diaminobibenzyl, trans-4,4′-diaminostilbene, and 4,4′-diaminotolan in N,N-dimethylacetamide (DMAc). Polypyromellitimides were synthesized in two steps by the ring-opening polyaddition of pyromellitic dianhydride with the aromatic diamines in DMAc, followed by thermal cyclodehydration. The amorphous polyisophthalamides were soluble in some amide solvents containing lithium chloride, while the polyterephthalamides having fair degree of crystallinity were insoluble in these solvents. The thermal stability of these aromatic polymers decreased in the order of the tolan-containing polymers > the stilbene-containing polymers > the bibenzyl-containing polymers, both in air and under nitrogen.     

Hydrogen-bonded networks in organic conductors: crystal structures and electronic properties of charge-transfer salts of tetracyanoquinodimethane with 4,4'-biimidazolium having multiprotonated States

[structure: see text] Novel hydrogen-bonded charge-transfer salts of TCNQ with mono- and diprotonated 4,4'-biimidazolium were synthesized in order to demonstrate the high potential of the 4,4'-biimidazole system in a molecular conductor from the viewpoint of crystal engineering and electronic modulation. Crystal structure analyses of neutral 4,4'-biimidazole and TCNQ salts revealed the formation of two types of hydrogen-bonding modes of the 4,4'-biimidazole moiety depending on the protonated states. Neutral 4,4'-biimidazole possessed a linear chain mode of hydrogen-bonding to construct two-dimensional network. In the TCNQ salt of monoprotonated 4,4'-biimidazolium, the 4,4'-biimidazole moiety formed a dimer by a complementary mode of hydrogen-bonding. In contrast, the salt of diprotonated 4,4'-biimidazolium showed a double linear chain mode of hydrogen-bonding to construct a three-dimensional network. The formation of two types of hydrogen-bonding modes made the difference in the stacking patterns of TCNQ columns and in their transport properties. The TCNQ salt of diprotonated 4,4'-biimidazolium exhibited high electrical conductivity (sigma(rt) = 1.1 x 10(-1) S cm(-1)).     

Solvent free synthesis of polyaniline-clay nanocomposites from mechanochemically intercalated anilinium fluoride

Nanocomposites consisting of conducting polyaniline and clay minerals were successfully synthesized from mechanochemically intercalated anilinium fluoride; the nanocomposites prepared by the mechanochemical intercalation method contained much more polyaniline in the clay layers than those prepared by a conventional solution method.     

Development of direct fluorination technology for application to materials for lithium battery

Direct fluorination of 1,3-dioxolan-2-one with elemental fluorine was successfully carried out to provide 4-fluoro-1,3-dioxolan-2-one, which was expected as an additive for lithium ion secondary battery. 4-Fluoro-1,3-dioxolan-2-one was also further fluorinated with elemental fluorine to give three isomers of difluoro derivatives by the same methodology. Another topic is the preparation of trifluoromethanesulfonyl fluoride, an intermediate of lithium battery electrolyte, by the reaction of methanesulfonyl fluoride with elemental fluorine. The use of perfluoro-2-methylpentane as a solvent gave satisfactory selectivity of trifluoromethanesulfonyl fluoride.     

Effect of sucrose on the structure of a cubic phase formed from a monoolein/water mixture

The effect of sucrose on the structure of molecular assemblies formed in an MO/H2O mixture has been studied using a small-angle X-ray scattering method. It was found that the phase transition Ia3d --> Pn3m --> H(II) occurs with increased sucrose concentration in the mixture with the composition 70 wt% MO at 20 degrees C. This structural change induced by sucrose addition would be ascribed to a cosmotropic property of sucrose, which leads to the dehydration of the MO head group and hence causes a decrease in the effective area occupied by the MO molecule at the polar/apolar interface, which facilitates the formation of molecular assemblies with a high curvature for the reversed liquid-crystal mesophase.     

Organoaluminum–cyclic ether-cyclic imide catalysts for the polymerization of epoxides

A catalyst for the polymerization of epoxides consisting of trialkylaluminums, cyclic ethers, and cyclic imides has been investigated. Various catalyst components were examined to reveal that the combination of triisobutylaluminum, dioxane, and succinimide gives the most active catalyst. The catalytic activity is greatly enhanced with aging in which the change in color from pale yellow to dark red takes place. The polymerization data show that the dioxane provides a pathway for the catalyst components to form an active species. The dioxane-containing catalyst is likely to be different in structure from that of the dioxane-free catalyst. It was shown that the catalyst solution is electrically conductive. A parallel correlation seems to exist between the electrical conductivity and the catalytic activity, suggesting that the catalytic species may be of an ionic character.     

A concise route to the right wing of ciguatoxin

A concise route to the HIJKLM-ring fragment 10 of ciguatoxin (CTX) and 51-hydroxyCTX3C was developed in which oxiranyl anion addition and intramolecular carbonyl olefination were utilized as key transformations. The present procedure requires only 23 steps from the I-ring 5, while 35 steps were employed in a previous synthesis of the corresponding right wing 11 of CTX3C. The high efficiency of the present synthesis ensures a supply of 10 for total synthesis and biomedical applications.     

Solvothermal synthesis of large surface area zirconia

The reaction of zirconium n-propoxide in glycol at 300°C yielded microcrystalline tetragonal zirconia (ZrO₂). The crystallite size of the product depended on the carbon number of the glycol and increased in the following order (carbon number of glycol): 2<6<4, which suggested that the heterolytic cleavage of O-C bond of gylcoxide formed by transesterification is the prime factor for the formation of the product. In toluene, zirconium isopropoxide also gave tetragonal zirconia at 300°C, and zirconium tert-butoxide decomposed at 200°C yielding amorphous zirconia, while zirconium n-propoxide was stable at 300°C. These results suggest that the reaction in toluene depends on the structure of the alkyl group of the alkoxides. Thus-obtained tetragonal zirconias maintained large surface areas (90–160 m²/g) even after calcination at 500°C.