PEO-based composite lithium polymer electrolyte, PEO-BaTiO3-Li(C2F5SO2)2N

Polyethylene oxide (PEO) based polymer electrolytes with BaTiO₃ as filler and Li(C₂F₅SO₂)₂N as salt have been examined in lithium polymer batteries. The aluminum disolution potential in PEO-Li(C₂F₅SO₂)₂N was estimated to be 4.1 V vs. Li/Li⁺ at 80 °C, which was compared to that of 3.8 V vs. Li/Li⁺ in PEO-Li(CF₃SO₂)₂N. The electrical conductivity of the system was measured as a function of O/Li ratio. The highest conductivity was observed in O/Li=8. The conductivity was 1.65×10⁻³ S/cm at 80 °C and 1.5×10⁻⁵ S/cm at 25 °C. The interfacial resistance of Li/polymer electrolyte/Li annealed at 80 °C for 15 days was lower than 100 Ωcm². Paper presented at the 8th EuroConference on Ionics, Carvoeiro, Algarve, Portugal, Sept. 16 – 22, 2001.     

Morphology of Nylon-6 blends with styrenic polymers

The morphology of blends of styrenic polymers in a matrix of 75% Nylon-6 prepared in a Brabender Plasti-Corder was examined by scanning electron microscopy. Styrene/acrylonitrile copolymers (SAN) form smaller particles as the AN level increases owing to the corresponding decrease in the SAN–polyamide interfacial tension. Various styrenic polymers containing functional groups, maleic anhydride or oxazoline type, that can react with Nylon-6 during melt processing were added to the SAN phase which also led to a decrease in the particle size owing to the graft copolymer formed in situ. The effects of functional group type, amount of functional groups per chain, amount of functional polymer added, and the miscibility of the styrene/maleic anhydride (SMA) and SAN copolymers on the morphology of the styrenic phase in the Nylon-6 matrix are described. © 1992 John Wiley & Sons, Inc.     

Simple and rapid determination of trace amounts of gold(III), palladium(II), and platinum(IV) in industrial waste solutions after recovery of noble metals by combined use of GFAAS and anion-exchange separation.

A simple and rapid method for the analysis of trace amounts of gold(III), palladium(II), and platinum(IV) by the combined use of graphite furnace atomic absorption spectrometry and anion-exchange separation was proposed, and successfully applied to the rapid determination of metals in industrial waste solutions obtained from the final process of noble-metal recovery factories, because noble metals can be selectively and quantitatively separated to a high degree by using a small column containing only a 0.7 g-portion of a common anion-exchange resin and a dilute thiourea solution.     

Influence of moisture on the viscoelastic relaxations in long aliphatic chain contained semiaromatic polyamide, (PA9‐T) fiber

The effect of moisture on the mechanical relaxation processes of semiaromatic semicrystalline polyamides synthesized by a long‐chain aliphatic diamine and terephthalic acid was investigated by dynamic viscoelastic analysis (DVA) and differential scanning calorimetry (DSC). Moreover, the implication of moisture with the amorphous and crystalline domains was also examined by temperature‐dependent wide‐angle X‐ray diffraction and Fourier transform infrared spectra. The characteristics of the relaxations such as α, β, γ, and the pronounced peak shoulder appeared at 25–100 °C in DVA tan δ curves were found to be strongly susceptible to the presence of moisture. With moisture evaporation, the peak shoulder of 25–100 °C and the β‐relaxation disappeared. The former is anticipated to originate from to the side group motion of hydrogen‐bonded water, whereas the later one is from the motions of the amide–water complex units. With the disappearance of the β‐relaxation, the γ‐relaxation appeared simultaneously in much lower temperatures and ultimately coupled with the δ‐relaxation. The γ‐relaxation is attributed to be associated with the molecular motion of the amide group and δ‐relaxation with for the motion of the methylene units. The existence of two types of water was identified in the polymer, namely, tightly bound and loosely bound. The tightly bound water is believed to be directly connected by hydrogen bonding with the strong polar groups and the loosely bound water weakly links with those connected water making hydrogen bridges. The moisture acts as a plasticizer in the polymer matrix, which causes quite a large depression in its glass transition temperature (T_g). WAXD and FTIR studies corroborated the existence of water solely in amorphous regions, i.e., no rapport of water with the crystalline parts. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2878–2891, 2003     

Polymorphy in the stereostructure of periodic polymer backbones

We theoretically investigated the polymorphy of the stereostructures of a periodic polymer. Using the polymer's internal conformation parameters of bond lengths, bond angles, and internal rotation angles, we extended the mathematical treatment for designing polymer backbones. We considered those periodic polymers whose unit cell consists of one (m = 1), two (m = 2), or three (m = 3) kinds of atoms. Moreover, for these three types of polymers, we supposed two catenation types for the skeleton atoms; one is a “homorotatory” sequence and the other is a “heterorotatory” one. To specify the backbone's stereostructure, we introduced several conformation parameters such as the helical pitch number n, the translation distance d, and the inclination angle of the skeleton plane Θ. By combining these parameters, we can systematically understand the variety and the possible polymorphy in the stereostructure of a periodic polymer backbone. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2829–2849, 2003     

Permeability,permselectivity, and penetrant‐induced plasticization in fluorinated polyimides studied by positron lifetime measurements

The ortho‐positronium (o‐Ps) lifetime τ₃ and its intensity I₃ in various fluorinated polyimides were determined by the positron annihilation technique and were studied with the spin–lattice relaxation time T₁ and the propylene permeability, solubility, diffusivity, and permselectivity for propylene/propane in them. τ₃, I₃, and the distribution of τ₃ changed when the bulky moieties in the polyimides were changed. The polyimides, having both large τ₃ and I₃ values, exhibited a short T₁ and a high permeability with a low permselectivity. The propylene permeability and diffusivity were exponentially correlated with the product of I₃ and the average free‐volume hole size estimated from τ₃. In highly plasticized states induced by the sorption of propylene, the permeability increased with the propylene pressure in excellent agreement with the change in the free‐volume hole properties probed by o‐Ps. The large and broad distribution of the free‐volume holes and increased local chain mobility for the 2,2‐bis(3,4‐decarboxyphenyl) hexafluoropropane dianhydride‐based polyimides are thought to be important physical properties for promoting penetrant‐induced plasticization. These results suggest that o‐Ps is a powerful probe of not only the free‐volume holes but also the corresponding permeation mechanism and penetrant‐induced plasticization phenomenon. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 308–318, 2003     

Synthesis and characterization of norbornene–ethylene–styrene terpolymers with a substituted ansa‐fluorenylamidodimethyltitanium‐based catalyst

This article reports a synthetic method for a norbornene–ethylene–styrene (N‐E‐S) terpolymer, which has not been well investigated so far, via incorporation of styrene (S) into vinyl‐type norbornene–ethylene (N‐E) copolymers catalyzed by a substituted ansa‐fluorenylamidodimethyltitanium [Me₂Si(3,6‐tBu₂Flu)(tBuN)]TiMe₂ catalyst ( I ) activated with a [Ph₃C][B(C₆F₅)₄]/Al(iBu)₃ cocatalyst at room temperature in toluene. The resulting terpolymerization product contained the targeted N‐E‐S terpolymer and the contaminated homopolymers, which were then able to be completely removed by solvent fractionation techniques. While homopolystyrene was easily extracted by fractionation with methylethylketone as a soluble part, homopolyethylene and a trace amount of homopolynorbornene could be perfectly separated by fractionation with chloroform as insoluble parts. The detail characterizations of a chloroform‐soluble polymer with gel permeation chromatography, nuclear magnetic resonance, and differential scanning calorimetry analyses proved that it contained a true N‐E‐S terpolymer with long N‐E sequences incorporated with isolated or short styrene sequences. The homogeneity of the morphology together with a single glass transition temperature that proportionally decreased with the increase of the styrene contents indicated that the N‐E‐S terpolymer obtained in this work is a random polymer with an amorphous structure. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2765–2773, 2007     

Hydration Structure Around the Carboxyl Group Studied by Neutron Diffraction with 12C/13C and H/D Isotopic Substitution Methods

Time-of-Flight (TOF) neutron diffraction measurements have been carried out on aqueous 8 mol% sodium acetate solutions in D₂O. Scattering cross sections that were observed for sample solutions involving ¹²C/¹³C and H/D isotopically substituted acetate ions were used to derive the first-order difference functions, Δ_H(Q) and Δ_C(Q), and corresponding distribution functions, G _H(r;r) and G _C(r;r), which describe the environmental structure around the methyl and the carboxyl groups within the acetate ion, respectively. Structural parameters concerning the first hydration shell of the carboxyl group within the acetate ion were obtained through the least squares fit to the observed intermolecular difference function, Δ_C ^inter(Q). The nearest neighbor C _O...D _W1 (C_O: carboxyl carbon atom, D_W1: water deuterium atom) distance, r(C _O...D _W1 ), and the angle, ∠ C _O ...D _W1 -O _W (O _W : water oxygen atom), were determined to be 2.63(1) Å and 120(1)°, respectively. The coordination number, n(C _O ...D _W1 ), was obtained to be 4.0(1). These results are consistent with the hydration structure in which water molecules in the first hydration shell of the carboxyl group are hydrogen-bonded with oxygen atoms of the carboxyl group.     

Preparation of chiral stationary phase via activated carbamate intermediate for liquid chromatographic optical resolution

Summary Chiral stationary phases (CSPs) for liquid chromatography were prepared by the way of an activated carbamate intermediate. The amino group of aminopropylsilyl silica gel was first activated by carbamylation with disuccinimido carbonate (DSC). The obtained activated carbamate silica gel (ACsil) proved useful as an intermediate for the preparation of urea-type CSPs. The reaction of ACsil with (S)- of (R)-1-(α-naphthyl)-ethylamine gave naphthylethylurea type CSPs. These CSPs were also obtained directly from aminopropylsilyl silica gel by its reaction with optically active (S)- or (R)-succinimido 1-(α-naphthyl)ethyl carbamate (SINEC). Several phenylthiohydantoin amino acid enantiomers and p-bromophenylcarbamyl amino acid enantiomers were resolved on the CSPs by elution with aqueous mobile phase.