Uptake of transition metal ions using liposomes containing dicetylphosphate as a ligand.

The uptake of Cu2+ was investigated using various types of liposomes composed of phosphatidylcholine (PC), cholesterol (Chol) and dicethylphosphate (DCP). DCP played a role as a ligand for Cu2+. Multilamellar vesicles (MLVs) were more effective for the uptake of Cu2+ compared to unilamellar vesicles prepared by the extrusion technique. The uptake efficiency of MLVs for Cu2+ was dependent on the molar ratio of DCP in MLVs. The uptake percent of Cu2+ was 92% using MLVs having a PC:DCP:Chol molar ratio of 4:3:3; 95% of the total vesicle Cu2+ was bound to DCP of the outer membrane surface of the MLVs, and the remaining 5% of the total Cu2+ was distributed into the interior side of the MLVs. MLVs having a PC:DCP:Chol molar ratio of 4:3:3 were also effective as separation media for Mn2+, Co2+, Ni2+ and Zn2+. The uptake efficiency of the MLVs for the transition-metal ions increased in the order Co2+ < Zn2+ < Ni2+ < Mn2+ < Cu2+.     

Living cationic polymerization of 2‐adamantyl vinyl ether

Living cationic polymerization of 2‐adamantyl vinyl ether (2‐vinyloxytricyclo[3.3.1.1]^3,7decane; 2‐AdVE) was achieved with the CH₃CH(OiBu)OCOCH₃/ethylaluminum sesquichloride/ethyl acetate [CH₃CH(OiBu)OCOCH₃/Et_1.5AlCl_1.5/CH₃COOEt] initiating system in toluene at 0 °C. The number‐average molecular weights (M_n's) of the obtained poly(2‐AdVE)s increased in direct proportion to monomer conversion and produced the polymers with narrow molecular weight distributions (MWDs) (M_w/M_n = ～1.1). When a second monomer feed was added to the almost polymerized reaction mixture, the added monomer was completely consumed and the M_n's of the polymers showed a direct increase against conversion of the added monomer. Block and statistical copolymerization of 2‐AdVE with n‐butyl vinyl ether (CH₂?CH? O? CH₂ CH₂CH₂CH₃; NBVE) were possible via living process based on the same initiating system to give the corresponding copolymers with narrow MWDs. Grass transition temperature (T_g) and thermal decomposition temperature (T_d) of the poly(2‐AdVE) (e.g., M_n = 22,000, M_w/M_n = 1.17) were 178 and 323 °C, respectively. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1629–1637, 2008     

In situ monitoring of the H concentration change near an electrode surface through electrolysis using slab optical waveguide pH sensor

The H⁺ concentration change was monitored near an electrode surface through an electrolysis using a slab optical waveguide technique. Indium tin oxide transparent electrode modified by porous insulating polymer to which methyl red was covalently immobilized was used as a guiding layer, and the absorbance change of the polymer film was monitored. H⁺ generation at the vicinity of the electrode through the oxidation of ascorbic acid could be monitored by this technique.     

Catalytic activity and regeneration property of a Pd nanoparticle encapsulated in a hollow porous carbon sphere for aerobic alcohol oxidation

A core-shell composite consisting of a palladium (Pd) nanoparticle and a hollow carbon shell (Pd@hmC) was employed as a catalyst for aerobic oxidation of various alcohols. The core-shell structure was synthesized by consecutive coatings of Pd nanoparticles with siliceous and carbon layers followed by removal of the intermediate siliceous layer. Structural characterizations using TEM and N(2) adsorption-desorption measurements revealed that Pd@hmC thus-obtained was composed of a Pd nanoparticle core of 3-6 nm in diameter and a hollow carbon shell with well-developed mesopore (ca. 2.5 nm in diameter) and micropore (ca. 0.4-0.8 nm in diameter) systems. When compared to some Pd-supported carbons, Pd@hmC showed a high level of catalytic activity for oxidation of benzyl alcohol into benzaldehyde using atmospheric pressure of O(2) as an oxidant. The Pd@hmC composite also exhibited a high level of catalytic activity for aerobic oxidations of other primary benzylic and allylic alcohols into corresponding aldehydes. The presence of a well-developed pore system in the lateral carbon shell enabled efficient diffusion of both substrates and products to reach the central Pd nanoparticles, leading to such high catalytic activities. This core-shell structure also provided high thermal stability of Pd nanoparticles toward coalescence and/or aggregation due to the physical isolation of each Pd nanoparticle from neighboring particles by the carbon shell: this specific property of Pd@hmC resulted in possible regeneration of catalytic activity for these aerobic oxidations by a high-temperature heat treatment of the sample recovered after catalytic reactions.     

Inverse electron demand asymmetric cycloadditions of cyclic carbonyl ylides catalyzed by chiral Lewis acids—Scope and limitations of diazo and olefinic substrates

High enantioselectivities (94-96% ee) were obtained for the inverse electron-demand 1,3-dipolar cycloadditions between cyclohexyl vinyl ether and 2-benzopyrylium-4-olate generated via Rh₂(OAc)₄-catalyzed decomposition of o-methoxycarbonyl-α-diazoacetophenone. The reactions were effectively catalyzed by Eu(OTf)₃, Ho(OTf)₃, or Gd(OTf)₃ complexes (10 mol %) of chiral 2,6-bis[(4S,5S)-4,5-diphenyl-2-oxazolinyl]pyridine. The reactions with the other electron-rich dipolarophiles such as allyl alcohol, 2,3-dihydrofuran, and butyl-tert-butyldimethylsilylketene acetal showed moderate enanantioselectivities (60-73% ee). Good to high enantioselectivities (73-97% ee) were also obtained for the cycloadditions between 3-acyl-2-benzopyrylium-4-olates, generated from methyl 2-(2-diazo-1,3-dioxoalkyl)benzoates and butyl or cyclohexyl vinyl ethers, in the presence of binaphthyldiimine (BINIM)-Ni(II) complexes (10 mol %). Under similar conditions, the reaction between methyl 2-(2-diazo-1,3-dioxohexyl)benzoate and 2,3-dihydrofuran was highly endo-selective, and moderately enantioselective (70% ee). For the BINIM-Ni(II)-catalyzed reactions of cyclohexyl vinyl ether, the use of an epoxyindanone as the 3-acyl-2-benzopyrylium-4-olate precursor revealed that the chiral Lewis acid can function as a catalyst for asymmetric induction. The scope of the cyclic carbonyl ylides was extended to those generated from 1-diazo-2,5-pentanedione derivatives, which were reacted with butyl or TBS vinyl ether and catalyzed using the (4S,5S)-Pybox-4,5-Ph₂-Lu(OTf)₃ complex to give good levels of asymmetric inductions (75-84% ee).     

Corrosion behaviour of mechanically polished AA7075‐T6 aluminium alloy

In the present study, the effects of mechanical polishing on the microstructure and corrosion behaviour of AA7075 aluminium alloy are investigated. It was found that a nano‐grained, near‐surface deformed layer, up to 400 nm thickness, is developed due to significant surface shear stress during mechanically polishing. Within the near‐surface deformed layer, the alloying elements have been redistributed and the microstructure of the alloy is modified; in particular, the normal MgZn₂ particles for T6 are absent. However, segregation bands, approximately 10‐nm thick, containing mainly zinc, are found at the grain boundaries within the near‐surface deformed layer. The presence of such segregation bands promoted localised corrosion along the grain boundaries within the near‐surface deformed layer due to microgalvanic action. During anodic polarisation of mechanically polished alloy in sodium chloride solution, two breakdown potentials were observed at ?750 mV and ?700 mV, respectively. The first breakdown potential is associated with an increased electrochemical activity of the near‐surface deformed layer, and the second breakdown potential is associated with typical pitting of the bulk alloy. Copyright © 2009 John Wiley & Sons, Ltd.     

Evaluation of thermodynamic and kinetic stability of CuAlO<Subscript>2</Subscript> and CuGaO<Subscript>2</Subscript>

Thermodynamic and kinetic stabilities of CuAlO₂ and CuGaO₂ have been evaluated by using thermogravimetry and thermodynamic calculations. It has been revealed that CuAlO₂ and CuGaO₂ are not thermodynamically stable in air below 800 °C and 1,200 °C, respectively, and that the oxidation reaction, 4CuMO₂ + O₂ → 2CuO + 2CuM₂O₄ (M = Al, Ga), should occur if the reaction kinetics are high enough. However, rate constants and activation energies indicated slow kinetics of the oxidation reaction, showing kinetic stability of CuMO₂ even under some thermodynamically unstable temperatures and atmospheres. It was also concluded that CuAlO₂ showed higher thermodynamic and kinetic stability than CuGaO₂.