Group separation of trivalent actinides and lanthanides by tertiary pyridine-type anion-exchange resin embedded in silica beads

The separation of trivalent actinides and lanthanides was studied by using newly developed tertiary pyridine-type anion-exchange resin embedded in silica beads. Chromatographic elution experiments were carried out by using a packed column of the new resin and methanol-hydrochloric acid solution as an effluent. We confirmed that the actinides were eluted well from the elution bands of lanthanides. Actinides and lanthanides were eluted according to the reverse order of their atomic number.     

Slurry sampling techniques for the determination of lead in Bangladeshi fish samples by electrothermal atomic absorption spectrometry with a metal tube atomizer

Ultrasonic slurry sampling electrothermal atomic absorption spectrometry with a metal tube atomizer has been applied to the determination of lead in Bangladeshi fish samples. The slurry sampling conditions, such as slurry stabilizing agent, slurry concentration, pyrolysis temperature for the slurried fish samples, particle size and ultrasonic agitation time, were optimized for electrothermal atomic absorption spectrometry with the Mo tube atomizer. Thiourea was used as the chemical modifier for the interference of matrix elements. The detection limit was 53 fg (3S/N). The determined amount of lead in Bangladeshi fish samples was consistent with those measured in the dissolved acid-digested samples. The advantages of the proposed methods are easy calibration, simplicity, low cost and rapid analysis.     

Effect of initiators on grafting in the initial stage of the emulsion polymerization of methyl methacrylate using poly(vinyl alcohol) as a protective colloid

 To make clear the reason of unsuitability of poly(vinyl alcohol) (PVA) protective colloid for the emulsion polymerization of conjugated monomers, a model experiment of emulsion polymerization of methyl methacrylate (MMA) was carried out with ammonium persulfate (APS) or azobis(isobutyronitrile) (AIBN) initiators, where a small amount of MMA (1/100th of the concentration compared with ordinary emulsion polymerization) was employed. This corresponds to the initial stage of the emulsion polymerization. Grafting of MMA onto PVA took place remarkably irrespective of the kind of the initiators. Formation of homo-poly(MMA) was observed to a small extent. The formation of new emulsion particles smaller than 100 nm continued to increase to almost the end of the polymerization. PVA molecules in the grafted polymer are supposed to act as stabilizers of newly formed particles. From kinetic treatment using the experimental data, the important issues were derived as follows. Firstly, the sulfate anion radical from APS is much more reactive than the isobutyronitrile radical from AIBN in terms of hydrogen abstraction from PVA. Secondly, high grafting ability of the latter initiator system, notwithstanding the much lower reactivity in the hydrogen abstraction compared with the APS system, is attributed to the relative reactivity of the primary radicals, i.e., hydrogen abstraction reaction from PVA to initiation reaction with MMA. The much slower rate of addition of the isobutyronitrile radical to the monomer compared with that of hydrogen abstraction from PVA facilitates the grafting, although the rate constant of hydrogen abstraction is far smaller than that with the sulfate anion radical by 10⁻⁴ times. Received: 26 April 2001 Accepted: 6 September 2001     

Chiral self-dimerization of vanadium complexes on a SiO2 surface: the first heterogeneous catalyst for asymmetric 2-naphthol coupling

The self-dimerized chiral assembly of vanadium-Schiff-base complexes was found to occur on a SiO2 surface and to be the first heterogeneous catalyst for the asymmetric oxidative coupling of 2-naphthol with 100% selectivity and 90% enantioselectivity.     

A potentiometric microbial sensor based on immobilized escherichia coli for glutamic acid

The sensor consists of immobilized E. coli (which contains glutamate decarboxylase) and a carbon dioxide gas-sensor. Continuous introduction of sample solution into a flow system incorporating the sensor gives a potential which increases until a steady state is reached after 5 min. Measurements can also be made with only a 1- or 3-min introduction period with little loss of sensitivity. Calibration plots of mV measurements vs. logarithmic glutamic acid concentration are linear in the range 100–800 mg l^-1. The sensor is highly selective, stable and reproducible. It has been applied to the determination of glutamic acid in fermentation broths.     

An improvement in the bending ability of a hinged trisaccharide with the assistance of a sugar-sugar interaction

Hinged di- and trisaccharides incorporating 2,4-diamino-beta-D-xylopyranoside as a hinge unit (Hin) were synthesized. Bridging of the diamino group of Hin by carbonylation or chelation to a metal ion results in a conformational change from (4)C1 to (1)C4, which in turn causes a bending of the oligosaccharides. In this study, the bending abilities of the hinged oligosaccharides were compared, in terms of the reactivities toward carbonylation and chelation. Di- or trisaccharides containing a 6-O-glycosylated mannopyranoside or galactopyranoside at their reducing ends had bending abilities similar to that of the Hin monosaccharide, probably because there were neither attractive nor repulsive interactions between the reducing and nonreducing ends. However, when Hin was attached at O2 of methyl mannopyranoside (Man alphaMe), the bending ability was dependent on the nonreducing sugar and the reaction conditions. Typically, a disaccharide--Hin beta(1,2)Man alphaMe--was difficult to bend under all the tested reaction conditions, and the bent population in the presence of Zn(II) was only 4%. On the other hand, a trisaccharide--Man alpha(1,3)Hin beta(1,2)Man alphaMe--was bent immediately after the addition of Zn(II) or Hg(II), and the bent population reached 75%, much larger than those of all the other hinged trisaccharides ever tested (<40%). This excellent bending ability suggests an attractive interaction between the reducing and nonreducing ends. The extended conformation was recovered by the addition of triethylenetetramine, a metal ion chelator. Reversible, quick, and efficient bending of the hinged trisaccharide was thus achieved.     

Multipoint recognition of catecholamines by hydrindacene-based receptors accompanied by the complexation-induced conformational switching

The molecular recognition of catecholamines by hydrindacene-based receptors 1 and 2, as well as the durene-based receptor 3, and the guest-induced conformational changes are reported. These receptors selectively bind adrenaline and dopamine salts through the guests' ammonium group and 3-hydroxyl group on the aromatic ring. In the case of adrenaline, an additional hydrogen bond with a benzylic hydroxyl group is formed. In 2 % CD3CN/CDCl3, the association constants are of the order of 10(4) M(-1), which is much larger than with guests without the 3-hydroxyl groups (10(3) M(-1)). The two amide groups of receptor 1 can rotate freely around the C(aromatic)--C(amide) bond, whereas the tert-amide in 2 changes between two stable conformations at a slow enough rate to allow detection by (1)H NMR spectroscopy. In the absence of a guest molecule, the syn-conformer is less stable than the anti-conformer. On complex formation with adrenaline, the syn-conformer becomes dominant due to an intramolecular dipole-reversal effect in addition to multipoint hydrogen bonding.     

Water‐Soluble N‐(n‐Fatty acyl)chitosans

Chitosan was partially N‐acylated by treatment with n‐fatty acid anhydrides in a homogeneous solution in 2 vol.‐% aqueous acetic acid‐methanol (1:2 v/v). The degree of substitution (d.s.) for N‐acyl groups in the water‐soluble N‐acylchitosan derivatives was in the range of 0.42–0.82 for N‐acetyl, 0.37–0.76 for N‐propionyl, 0.52–0.71 for N‐butyryl and 0.54–0.64 for N‐pentanoyl and ca. 0.58 for N‐hexanoyl, respectively.

Water soluble N‐(n‐fatty acyl)chitosans.     

Continuous flow system for the determination of trace vanadium in natural waters utilizing in-line preconcentration/separation coupled with catalytic photometric detection

A sensitive and rapid method is presented for the determination of vanadium at ng to sub-ng ml(-1) levels in natural waters, in which in-line preconcentration/separation is directly coupled with catalytic detection of vanadium in a flow-injection system. Vanadium was adsorbed on a small column packed with Sephadex G-25 gel and desorbed with a small volume of 0.010 M HCl. The catalytic action of vanadium on the oxidation of chromotropic acid (1,8-dihydroxy-3,6-naphthalenedisulphonic acid) by bromate in pH 3.8 buffered media was used in the sensitive determination of vanadium. Effective preconcentration/separation of trace vanadium can be achieved from Fe(III), Cu(II) and a large excess of sodium chloride in seawater sample. A linear calibration using a 5 m sample loop was obtained for vanadium in the range 0-2.5 ng ml(-1). The limit of detection was 0.02 ng ml(-1) and the relative standard deviation was 1.2% for 1.0 ng ml(-1) vanadium (n=5). The present FIA system is rapid and sensitive and can be readily applied to river water and coastal seawater samples.