Investigation of Aconitine-type Alkaloids from Processed Tuber of Aconitum carmiechaeli by HPLC-ESI-MS/MS~n

Introduction Aconitine-type alkaloids isolated from the roots of Aconitum carmiechaeli show a potential toxicity and a broad spectrum of bioactivity[1-4].On the basis of the C8-substituent of C19-diterpenoid skeleton,aconitine-type alkaloids can be divided into diester-diterpenoid alkaloids(DDAs),monoester-diterpenoid alkaloids(MDAs),and lipo-alkaloids(Fig.1).     

萘降解菌LHJ38生物合成靛蓝的研究

萘降解菌LHJ38在金属盐培养基中加入水杨酸钠诱导培养后能提高其生物合成靛蓝的能力,在LB培养基中加入水杨酸钠反而抑制了其生物合成靛蓝的能力.与LHJ38最适生长pH值不同,LHJ38生物合成靛蓝的最佳pH值范围是8.45—9.45,在pH为8.95的情况下生物合成靛蓝能力是其在pH值为6.95的情况下的两倍.     

三种化学方法合成K0.5Bi0.5TiO3粉体的机理比较

采用溶胶-凝胶法、水热法和溶胶-凝胶-水热法三种化学方法合成K_0.5Bi_0.5TiO₃ (KBT)无铅压电陶瓷粉体. 用X射线衍射(XRD)分析产物的结构, 用扫描电镜(SEM)和透射电镜(TEM)观察产物的形貌. 实验结果表明, 三种化学方法均可获得纯钙钛矿相KBT粉体, 但不同工艺获得的粉体在形貌和生成机制上有很大的不同. 溶胶-凝胶法属高温固相扩散机制, 需要700 ℃以上温度煅烧才可获得KBT纯相, 且粉体颗粒度大、团聚严重. 水热法符合溶解-结晶机制, 生长出四方形的KBT纳米片. 溶胶-凝胶-水热法利用了凝胶团聚体空间链状结构的模板作用, 通过原位结晶机制生长出KBT纳米线.     

液相电化学沉积类金刚石薄膜的研究进展

采用电化学沉积法开展液相中类金刚石薄膜的制备工艺和理论的研究,对于完善类金刚石薄膜的合成技术,开拓类金刚石薄膜的应用领域,具有很重要的理论意义和实用价值。本文概述了液相电沉积技术的基本原理和方法,重点从四个方面介绍了电化学方法制备类金刚石薄膜的研究进展,总结了该方法所制备样品的性能,并对可能的反应机制作了综合性的阐述,最后对液相电沉积类金刚石薄膜的发展前景进行了展望。     

Flow injection chemiluminescence determination of nitrofurazone in pharmaceutical preparations and biological fluids based on oxidation by singlet oxygen generated in N-bromosuccinimide-hydrogen peroxide reaction

A simple flow injection chemiluminescence (FI-CL) method was proposed for the determination of nitrofurazone. Strong CL signal was generated during the reaction of nitrofurazone with H₂O₂ and N-bromosuccinimide (NBS) in alkaline condition. The CL signal was proportional to the nitrofurazone concentration in the range 1.0 × 10⁻⁷ to 1.0 × 10⁻⁵ g mL⁻¹. The detection limit was 2 × 10⁻⁸ g mL⁻¹ nitrofurazone and the relative standard deviation was less than 4% (6.0 × 10⁻⁶ g mL⁻¹ nitrofurazone, n = 11). The proposed method was successfully applied to the determination of nitrofurazone in compound furacillin nasal drops, human plasma and urine samples. The CL reaction mechanism was also discussed briefly. Singlet oxygen generated in the reaction between H₂O₂ and NBS was suggested to be participated in the CL reaction.     

Synthesis, Structure and Optical Properties of Cerium(Ⅲ) Triphosphate CeP3O9

The single crystal and crystallized powder of triphosphate CeP3O9 have been synthesized, and the space group of CeP3O9 has been determined to be C2221 with the cell parameters ofa = 8.6059, b = 11.2437, c = 7.3518 (A), V= 711.4(3) (A)3, Z= 4, Dc = 3.520 g/cm3, F(000) = 700,R = 0.0377 and wR = 0.0930. The absorption and emission spectra have been measured, for which the strongest absorption and emission peaks are located at 280 and 320 nm, respectively. The density of state (DOS) and dielectric function have been calculated by the DFT method. The crystal is transparent provided the wavelength is larger than 341 nm, and the observed ultraviolet cut-off edge is at about 350 nm for a polycrystalline power sample. It is possible that the triphosphate CeP3O9 will become an ultraviolet emission material.     

镉与2—[（邻羟苄叉）氨基]酚和吡啶配合物的表征和晶体结构

合成了镉与2-[(邻羟苄叉)氨基]酚(H_2Sap)和吡啶配合物,Cd_2(C_(13)H_9No_2)_2(C_5H_5N)_6.测定其晶体属单针晶系,P2_1/c空间群,的配位构型为八面体.用红外、核磁、热分析等枝术进行了表征.     

Phase behaviour and microstructures of microemulsions (I)

By the orthogonal design, the optimal formation conditions for the middle-phase microemulsions in the system dioctadecyldimethylammonium chloride (DODMAC)/ sodium dodecyl sulfate (SDS)/n-butanol/n-hep-tane/brine were obtained as follows: W_DODMAC: W_SDS = 1:4-1:5,C _π-butanol (%) = 11.0-12.0, andC _NaCl (%) = 3.25 Investigations have been made on the effects of the concentrations of NaCl and n-butanol (l.0%-14.0%), the ratios ofWDODMAC: to W_SDS, and the kinds of alcohols (n-propanol, n-butanol, and n-pentanol) on the formation, the phase behaviour, the ultralow interfacial tensions, the optimal salinity (S^*), and the length of salinity (δS). Some rules and data were worked out about the formation and characteristics of the middle-phase microemulsions. The mi-crostructures of the middle-phase microemulsions were also studied by using FT-IR, ESR, and freeze fracture electron microscopy techniques. The results from the three methods show that the microstructures of the middlephase mi-croemulsions undergo the change from O/W to bicontinuous (B.C.) and to W/O. The distribution rule of the orga-nized molecule assemblies in the middle-phase microemulsions is conducible to constructing the model of microemulsion systems, to recognizing the microstructures of the middle-phase microemulsions, and to setting forth the relationship between the microstructures and macro-properties of rnicroemulsions. Project supported by the Niltional Natural Science Foundation of China and the Chinese Postdoctoral Science Foundation.     

Correlation of the Dielectric Properties of Dispersed Particles with the Electrorheological Effect

The dc field rheological properties and frequency dependent dielectric properties of a set of electrorheological (ER) fluids composed of oxidized polyacrylonitrile or aluminosilicate materials dispersed in silicone oil were examined in this paper. Our experimental investigations show that there is a complicated relationship between the dielectric properties of dispersed particles and the ER effect. The dielectric loss of dispersed particles, which has not attracted much attention in previous work, was found to play a considerable role in ER response. The large dielectric loss tangent, experimentally around 0.10 at 1000 Hz, is found to be needed for a strong ER effect. A good ER solid material should first have large dielectric loss, and then the higher the dielectric constant, the stronger the ER effect. The large dielectric loss would facilitate the turning of dispersed particles, and the high dielectric constant would maintain the fibrillation structure stable and strong. Two processes, the particle turning process and the particle polarization process, are thought to be involved in ER activity. Our findings, in connection with the Wagner model, can better explain why the strongest ER effect occurs at particle conductivity of 10⁻⁷S/m; why the shear stress of some ER fluids decreases with frequency while with others the shear stress increases with frequency; and why trace water can enhance the ER effect considerably, which would help in understanding the mechanism of the ER effect. Too large a dielectric loss is thought to be unfavorable for the ER effect, and its suitable range is worth further study. The results also present a method of designing high performance ER fluids, which would significantly promote development of electrorheology and its application in industrial areas.     

Chelate synthesis of 2,2′-bipyridin-4-one

A method for the synthesis of 2,2′-bipyridin-4-one from 4-amino-4-(2-pyridyl)-but-3-en-2-onevia its diphenylboron, chelates was proposed. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2071–2073, November, 1997.