Beiträge zur Chemie des Phosphors. 117. Synthese und Eigenschaften der Hexaorganyl-octaphosphane(6) P8R6, R = Me,Et, Pri

Contributions to the Chemistry of Phosphorus. 117. Synthesis and Properties of the Hexaorganyl-octaphosphanes(6) P₈R₆, R = Me, Et, Prⁱ The Hexaorganyl-octaphosphanes(6) P₈Me₆ ( 1 ), P₈Et₆ ( 2 ), and P₈Pr ( 3 ) have been obtained by reacting mixtures of the corresponding organyldichlorophosphanes and phosphorus(III) chloride with magnesium. In the case of 1 and 2 the organyl-cyclophosphanes (PR)_n can also be used in the reaction with phosphorus(III) chloride and magnesium. Besides, mainly P₇R₅ as well as other polycyclic organylphosphanes are formed. 2 and 3 have been isolated as pure substances, whereas 1 was concentrated to ?50 mol-% in the product mixture. According to their ³¹P-NMR spectra the three compounds possess a pentalane-analogous P₈-skeleton with the substituents within each five-membered ring in trans position and the substituents of different five-membered rings next to the zero bridge in cis position; the organyl groups in the 3, 7 position are trans oriented with respect to the free electron pairs of the bridgehead atoms. Therefore, the structures of 1 – 3 differ from the known tert-butyl compound P₈Bu, whereas the corresponding phosphorus hydride P₈H₆ has the same pentalane-analogous P₈-skeleton, thus being a bicyclo[3.3.0]octaphosphane.     

Reduction of 4-arylidene-1,3-(2H,4H)isoquinolinediones

Catalytic hydrogenation of some 4-arylidene-1,3-(2H,4H)isoquinolinediones (1) afforded the corresponding 4-arylmethyl-1,3-(2H,4H)isoquinolinediones (2) , but reduction of 1 by sodium borohydride gave 4-arylmethyl-1(2H)isoquinolones (isocarbostyrils, 3). Compounds of type 1 studied had aryl substituents phenyl, 3,4-dimethoxyphenyl, 3,4-methyleneoxyphenyl and 2-furyl. In one example of sodium borohydride reduction of an N-methylisoquinolinedione derivative (1) the heterocylic ring was opened, and 2-(1-hydroxymethyl-2-phenylethenyl)-N-methylbenzamide (4) was obtained from 4-benzylidene-2-methyl-1,3-(2H,4H)isoquinolinedione.     

An iron reservoir model based on ferrichrome: iron(III)-binding and metal(III)-exchange properties of tripodal monotopic and ditopic hydroxamate ligands with an L-alanyl-L-alanyl-N-hydroxy-beta-alanyl sequence

To gain knowledge about biological iron mobilization, tripodal monotopic and ditopic hydroxamate ligands (1 and 2) are prepared, and their iron-chelating properties are investigated. Ligands 1 and 2 contain three Ala-Ala-beta-(HO)Ala units and three [Ala-Ala-beta-(HO)Ala](2) units connected with tris(alanylaminoethyl)amine, respectively, and form six-coordinate octahedral complexes with iron(III) in aqueous solution. Ligand 1 and 1 equiv of iron give Fe-1, and ligand 2 and 1 or 2 equiv of iron produce Fe(1)-2, or Fe(2)-2. These complexes exhibit absorptions at lambda(max) 425 nm of epsilon 2800-3000/Fe, characteristic of tris(hydroxamato)iron(III) complexes, and preferentially assume the Delta-cis configuration. Loading of Fe(III) on 1, 2, and M(III)-loaded ligands (M-1 and M(1)-2, M = Al, Ga, In) with ammonium ferric oxalate at pH 5.4 is performed, and the second-order rate constants of loading with respect to Fe(III) and the ligand or M(III)-loaded ligands are determined. The rates of loading of Fe(III) on M-1 increase in the order Al-1 < Ga-1 < In-1, and those on M(1)-2 in the order Al(1)-2 < Ga(1)-2 < Fe(1)-2 < In(1)-2, indicating that the dissociation tendency of M(III) ions from the hydroxamate ligand is an important factor. The iron complexes formed with 2 are subjected to an iron removal reaction with excess EDTA in aqueous pH 5.4 solution at 25.0 degrees C, and the collected data are analyzed by curve-fitting using appropriate first-order kinetic equations, providing the rate constants for the upper site and the lower site of 2. Similar analysis for FeM-2 affords removal rate constants for Fe(up)-2, M(up)-2, and Fe(low)-2, and the iron residence probability at each site. The protonation constants of the hydroxamate groups for 1 and 2 (pK(1,) pK(2), pK(3), and pK(1,) pK(2)., pK(6)) are determined, and the proton-independent stability constants for Fe-1, the upper site of Fe(2)-2, and the lower site of Fe(1)-2 are 10(28), 10(29), and 10(28.5), respectively.     

Optimal controls that maximize the probability of hitting a set of targets: A numerical study

A two-dimensional random motion of a point is dealt with. The point velocity (v cos ?,v sin ?) is subjected to two different kinds of perturbations, the first represented by a vector of independent standard Wiener processes and the second by a generalized type of Poisson process. The control function is ?, whilev is kept fixed. We assume given a configuration ofn+1 target sets,A ₀,...,A _n , in the plane, all of these sets being surrounded by an open and bounded setD. We denote by ? _x (?(?)∈A _i the probability thatX _t , the location of the point, whereX ₀=x∈D, will reach the setA _i beforeX _i reaches any other setA _j ,i≠j, and before it leavesD. The problem dealt with here is to find an optimal control law ?*, ?*=?*(x),x∈D, such that the function $$V\left( {x;\theta } \right) = \sum\limits_{i = 0}^n {\lambda _i \mathbb{P}_x \left( {X_\tau \left( \theta \right) \in A_i } \right),}$$ where λ₁,i=0,...,n, are given nonnegative numbers, will be maximized on a given class of admissible control laws. Sufficient conditions on optimal controls, of a dynamic programming type, are derived. These conditions require the existence of a smooth solution to a nonlinear partial integrodifferential equation, which is solved here by applying a finite-difference scheme. Two examples are dealt with numerically.     

Aging of poly(2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene)/toluene solutions and subsequent effects on luminescence behavior of cast films

Morphological effects in luminescence properties of a representative semiconducting polymer, poly(2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene) (MEH-PPV), has recently attracted much attention. Previous studies indicated that short-term heat treatment of solution-cast MEH-PPV films may result in the formation of mesomorphic order that is responsible for the "red" emission around 640 nm, in contrast to the single-chromophore "yellow" emission near 590 nm from the disordered matrix. On the basis of microscopic and spectroscopic evidence for films cast from freshly prepared and aged solutions, here we show that prolonged storage of MEHyellowPPV solutions at room temperature or lower may result in retardation of the thermally induced mesophase formation in the subsequently cast films. According to small-angle neutron scattering and differential scanning calorimetric observations over aged MEH-PPV/toluene solutions, we propose that the suppressed transformation into mesomorphic order is due to further development of nanocrystalline aggregates that serve as physical cross-links among MEH-PPV chains in the solution state upon long-term storage. These solvent-induced nanocrystalline aggregates, however, do not exhibit new spectroscopic features beyond the suppression of "red" emission at 640 nm from the mesomorphic phase.     

Determination of buprenorphine by high-performance liquid chromatography with fluorescence detection: application to human and rabbit pharmacokinetic studies.

A rapid, sensitive, precise and accurate high-performance liquid chromatographic assay with fluorescence detection was developed for the determination of buprenorphine in human, rabbit, pig and dog plasma. It is comprised of only a one-step extraction procedure with hexane-isoamyl alcohol at pH 9.25 and reversed-phase chromatography on a muPorasil column. The recoveries of buprenorphine and nalbuphine (internal standard) were greater than 90%. Calibration graphs were linear over the concentration range 3-300 ng/ml with a coefficient of variation, both within-day and between-day, of less than 9% at any level. The limit of detection was 1.0 ng/ml of plasma based on a signal-to-noise ratio of 3. Eight other clinically used narcotics were investigated to check for potential interferences and their analytical conditions. The possible decomposed compounds of buprenorphine were also checked for the specificity of this assay. The method has been successfully applied to the stability and pharmacokinetic studies of buprenorphine. Buprenorphine in plasma did not decompose significantly at -20 degrees C for four weeks. Pharmacokinetic application in six rabbits and a surgical patient revealed that buprenorphine followed a linear three-compartment model with two distribution phases. The two distribution and elimination half-lives and the clearance of buprenorphine were 1.32, 24.8 and 230 min and 224 ml/min in human plasma, and 0.94, 12.5 and 232 min and 30 ml/min in rabbit plasma.     

Effects of metal elements on beta-hexosaminidase release from rat basophilic leukemia cells (RBL-2H3).

Immediate allergy is caused by a chemical mediator released from basophile and mast cells via cell degranulation due to reaction between an immunoglobulin E (IgE) antibody, bound with the IgE receptor on the cell membrane, and an antigen. The present authors have established a new method for assaying the enzyme activity of beta-hexosaminidase as an index of chemical mediator release. Using cultured cells instead of conventional methods based on histamine release from mast cells, the present method permits highly accurate mass screening since it uses a well-established cell line of rat basophilic leukemia cells (RBL-2H3). The effects of metal elements on immediate allergic reaction were evaluated using a newly developed assay system. A total of 38 metal elements were investigated for effects on immediate allergic reactions in vitro. These elements were classified by five types on the basis of action on beta-hexosanimidase release: 1) those which showed very strong inhibitory action, such as ZnCl2 and ZrCl4, 2) those which showed relatively strong inhibitory action, such as CdCl2 and CuCl2, 3) those which showed relatively weak inhibitory action, such as CoCl2 and Pb(NO3)2, 4) those which showed neither inhibitory nor promoting action, such as MnCl2 and SrCl2, and 5) AgNO3, which alone showed promoting action.     

Reduced metabolites of 18-hydroxy-11-deoxycorticosterone

Conditions are described for the preparation of the dihydro (2 and 6) and tetrahydro derivatives (3, 5 and 7) of 18-hydroxy-11-deoxycortisterone (1a) by microbial transformations using Clostridium parapurificum and chemical methods. The products were fully characterized and degraded into their respective 20 → 18 etiolactones. Microbial and chemical reductions of the Δ⁴-3-ketolactone 8 are presented.     

Reaction d'un thiolate de molybdene sur l'hexafluorobutyne

Bis(methyl)disulphide and the organometallic compound {(Cp)Mo(CO)₃}₂ in low oxidation state under photolysis give especially with the hexa-fluorobut-2 yne a 18-electron olefin complexe {(Cp)Mo(CO)₃(CF₃C₂CF₃SCH₃)}. The new compounds are reported and the reaction discussed.     

Separation of N2-ethyl-2'-deoxyguanosine-5'-monophosphate and four native deoxyribonucleoside monophosphates using capillary zone electrophoresis with polyethylene glycol as buffer additive

We investigated the separation of five deoxyribonucleoside monophosphates: 2'-deoxyguanosine-5'-monophosphate (dGMP), 2'-deoxyadenosine-5'-monophosphate (dAMP), 2'-deoxycytosine-5'-monophosphate (dCMP), 2'-deoxythymidine-5'-monophosphate (dTMP) and a dGMP adduct possessing N2-ethyl-guanine, which has been noted in relation to mutagenesis of alcohol, using capillary zone electrophoresis (CZE). The concentration of polyethylene glycol (PEG) as a modifier and the pH of the running solutions can efficiently control the observed separation. Interaction of PEG with analytes was quantitatively evaluated. PEG worked effectively as a hydrophobic selector in these separations. The values of pKa of the acidic-NH-groups in the base moieties of dGMP, dTMP, and the dGMP adduct are close to that of boric acid used as buffer of the running solutions. The control of their charge was facilitated, enabling improved separations. A more sufficient and fast separation was achieved by both optimization of pH of the running solutions and PEG concentration compared with that obtained by pH control alone. On-line concentration using a stacking method followed by the PEG-assisted CZE was briefly studied.