Fe和Co催化的碳-碳偶联反应的最新进展

作为廉价而且低毒的金属, Fe和Co是发展催化剂的理想元素. 同时由于Fe和Co有着多种氧化还原价态, 它们的催化化学应该具有极其丰富的内容. 然而由于种种原因, Fe和Co的催化剂很少得到有机化学家的关注. 直到最近几年, 人们才发现Fe和Co的催化剂可以很好地催化碳-碳偶联反应. 综述了Fe和Co催化碳-碳偶联反应的条件、产率和选择性; 探讨了这些新奇反应的可能机理; 并介绍了这些反应在复杂化合物合成中的应用.     

电解沉积压电频移分析的理论与验证

提出了控制电位电解和恒电流电解两类电解沉积的压电频移分析法测定的理论公式,用实验结果验证了它的正确性.     

Construction and analytical application of ion-selective piezoelectric sensor for atropine sulfate

The method describes the use of a piezoelectric quartz crystal (PQC) as a substitute for ion-selective electrodes. The approach is feasible when the membrane materials are electrically non-conductive and membrane potential measurements are consequently not possible. An ion-selective piezoelectric sensor sensitive to atropine sulfate was constructed by coating a PVC membrane containing activant on one the side of a PQC. On the basis of selective adsorption of atropine ions across the modified film and the sensitive mass response of PQC, the method exhibits a sensitive, rapid response and is easy to operate without pretreatment of the sample. The logarithm of the frequency shift gave a linear relationship with the logarithm of atropine sulfate concentration in the 1.0 x 10(-8)-1.0 x 10(-3) M range with a detection limit of 5.0 x 10(-9) M at pH 7.0. Recoveries were from 98.7-102.2%. Two activants, atropine tetraphenylborate and atropine dipicrylaminate, were synthesized and investigated. Influencing factors were also examined and optimized. The results for real samples obtained by the proposed method agreed with those obtained by conventional methods.     

BaLaB_9O_（16）中Ce~（3＋）敏化Dy~（3＋）发光的机理

在紫外光激发下，研究了ＢａＬａＢ９Ｏ（１６）中Ｄｙ（３＋）、Ｃｅ（３＋）的发光光谱、激发光谱、发光强度及荧光寿命随着组成变化的规律性．结果表明：Ｄｅ（３＋）对Ｄｙ（３＋）的发光有相当强的敏化作用，Ｃｅ（３＋）→Ｄｙ（３＋）的能量传递效率可高达９３％，能量传递的机理为电偶极－偶极相互作用的共振传递．根据３４９ｎｍ激发下Ｄｙ（３＋）发光强度与浓度的关系，证明了Ｄｙ（３＋）发光的自身浓度猝灭机理也为电偶极－偶极相互作用．     

Effect of thermal history on crystallization and melting behaviour of lldpe

In this paper two LLDPE samples with their own structural parameters were studied by means of DSC. Experimental results show that DSC was good for revealing slight structural difference between these two samples. Furthermore, the effect of thermal history on crystallization and melting behaviour of LLDPE was observed clearly through varying conditions of thermal treatment.

---

Zusammenfassung Mittels DSC werden zwei LLDPE-Proben mit ihren eigenen Strukturparametern untersucht. Die Versuchsergebnisse zeigen, da\ sich DSC gut eignet, um gering fügige Unterschiede dieser zwei Proben nachzuweisen. Weiterhin wurde unter verschiedenen Bedingungen der Einflu\ der thermischen Vorgeschichte auf das Kristallisations-und Schmelzverhalten von LLDPE untersucht.

     

Ultraviolet photochemistry of ethane: implications for the atmospheric chemistry of the gas giants

Chemical processing in the stratospheres of the gas giants is driven by incident vacuum ultraviolet (VUV) light. Ethane is an important constituent in the atmospheres of the gas giants in our solar system. The present work describes translational spectroscopy studies of the VUV photochemistry of ethane using tuneable radiation in the wavelength range 112 ≤ λ ≤ 126 nm from a free electron laser and event-triggered, fast-framing, multi-mass imaging detection methods. Contributions from at least five primary photofragmentation pathways yielding CH₂, CH₃ and/or H atom products are demonstrated and interpreted in terms of unimolecular decay following rapid non-adiabatic coupling to the ground state potential energy surface. These data serve to highlight parallels with methane photochemistry and limitations in contemporary models of the photoinduced stratospheric chemistry of the gas giants. The work identifies additional photochemical reactions that require incorporation into next generation extraterrestrial atmospheric chemistry models which should help rationalise hitherto unexplained aspects of the atmospheric ethane/acetylene ratios revealed by the Cassini–Huygens fly-by of Jupiter.

The vacuum ultraviolet photodissociation dynamics of ethane provide clues for modelling the atmospheric chemistry of the gas giants.     

Special Mixing Behavior of Chelate-based Ionic Liquid with Methanol

Compared to the general ionic liquids (ILs), a significant deviation of the binary mixtures of 1-decyl-3-methylimidazolium tri(hexafluoroacetylaceto)-copper(II) ([C₁₀mim][Cu(hfacac)₃]) with methanol was found, indicating the way methanol interacts with ILs might be governed by the special structure of the chelating anion. IR results showed that the (C2-H) of 1-decyl-3-methylimidazolium hexafluoroacetylacetonate ([C₁₀mim][hfacac]) blue-shifted more significantly than that of [C₁₀mim][Cu(hfacac)₃], meanwhile the (C=O) red-shifted in [C₁₀mim][Cu(hfacac)₃], which is contrast with that in [C₁₀mim][hfacac]. Two-dimensional correlation analysis of the FTIR spectra indicated that the chelating cavity has little effect on the sequence of the ILs sites that interact with methanol. Combined with small angle X-ray scattering (SAXS) results, the picture of mixing processes in these two systems were proposed. Methanol interacts directly with the anion followed by the cation in [C₁₀mim][hfacac], while methanol preferentially enters the chelating cavity and enhances the packing effect in the [C₁₀mim][Cu(hfacac)₃] system.     

Gas-phase spectroscopy of the unstable sulfur diisocyanate molecule S(NCO)2.

Sulfur diisocyanate is generated from a heterogeneous reaction of gaseous sulfur dichloride with silver cyanate and studied for the first time in the gas phase. Combined with quantum chemical calculations, the electronic structure is characterized by photoelectron spectroscopy (PES). Simultaneously, an investigation of the possible ionization and dissociation processes for the molecular cation is presented based on experimental soft ionization mass spectrometry. From the calculated bond-dissociation energies, the dissociation pathway is determined. S(NCO)2+ undergoes 1,3-sigmatropic rearrangement with a smaller barrier height (9.9 kcal mol(-1)) than the neutral counterpart. Thus, the 1,3-sigmatropic rearrangement is preferred for the molecular cation, and OCNCO+ and NS+ is produced by subsequent dissociation of the rearrangement product. The analysis agrees very well with the experimental mass spectrum.     

Pressurized gradient capillary electrochromatographic separation of eighteen amino acid derivatives

A pressurized gradient capillary electrochromatography (pCEC) instrument was developed to separate 18 amino acid derivatives. A reversed-phase C18 column (3 microm, 130 mm x 75 microm I.D.) and an acetate buffer (50 mmol/l NaAc, pH 6.4) with an ion-pair reagent (1% N,N-dimethylformamide) were used to separate derivatized amino acids from a standard solution (2 microg/ml), and the wavelength of the UV-Vis detector was 360 nm. The pressure on the capillary column was kept at approx. 70 Pa and 3 kV positive voltage was added on the outlet end of column. The effect of voltage on the eluting order of amino acids and the resolution of separation were studied, and it was found that when the voltage was higher than 3 kV, the adsorption of amino acids in the porous C18 column occurred. The effect of salt concentration, injection volume, and column length on the separation of amino acids was determined. The amino acid sample was separated by pCEC, and RSDs of the migration times of each amino acid were all less than 2.5%.     

Differential pulse voltammetric determination of arsenic(III,V) and antimony (III,V) in glasses

Summary Analytical methods based on differential pulse voltammetry (DPV) have been described for the determination of total As, As(III), As(V), total Sb and Sb(III) as trace to minor constituents in complex glasses. For total As, the sample is decomposed with HF-H₂SO₄-KMnO₄. The As(V) is chemically reduced to As (III) by hypophosphite and a DPV scan is carried out at the dropping mercury electrode from –0.2 to –0.7 Vvs. SCE (E _p –0.41V). As(V) is determined by decomposing the sample in HF-H₂SO₄ and volatilizing the As(III) as AsF₃. The chemical reduction of As(V) and the DPV scan are then applied. If the glass can be decomposed with cold HF, the As(III) present in the glass can be determined by applying the DPV scan after cold sample-dissolution. For Sb(III), the sample is decomposed with HF-H₂SO₄, diluted, and adjusted to 1M in HCl. A DPV scan is conducted from –0.03 to –0.5 V (E _p –0.15 V). Sb(V) is not reduced in the 1M HCl supporting electrolyte. Total Sb is determined by using an aliquot of the sample solution adjusted to 6M in HCl. The DPV sweep is carried out from –0.5 to –0.1 V [E _p for Sb(V) and Sb(III) is –0.30 V]. The methods have been applied to a wide range of glass compositions and the results compared with values obtained by spectrophotometry and coulometric titration.

---

Bestimmung von Arsen(III, V) und Antimon(III, V) in Gläsern mit Hilfe der Differential-Puls-Voltammetrie

Zusammenfassung Analytische Methoden auf der Grundlage der Differential-Puls-Voltammetrie (DPV) für die Bestimmung des gesamten Arsens, As(III), As(V), des gesamten Antimons und Sb(III) als Spuren in komplexen Gläsern wurden beschrieben. Zwecks Bestimmung des Gesamt-As wird die Probe mit Flußsäure +Schwefelsäure + Permanganat aufgeschlossen. As(V) wird mit Hypophosphit reduziert und die DPV wird an einer Quecksilber-Tropfelektrode zwischen –0,2 und –0,7V gegen eine ges. Kalomelelektrode (E _p =–0,41V) durchgeführt. Zur Bestimmung von As(V) wird die Probe mit HF-H₂SO₄ unter Verflüchtigung des As(III) als AsF₃ aufgeschlossen. Dann erfolgt die Reduktion des As(V) und die DPV. Wenn sich das Glas mit kalter HF lösen läßt, wird anwesendes As(III) mittels DPV in dieser Lösung bestimmt. Zur Bestimmung des Sb(III) wird die Probe mit HF-H₂SO₄ zersetzt, verdünnt und bis zur 1-Molarität mit HCl versetzt. Dann wird mit DPV zwischen –0,03 und –0,5V gemessen (E _p =–0,15V). Sb(V) wird in 1M salzsaurer Lösung nicht reduziert. Das Gesamt-Sb wird in einem Aliquot der Probelösung bestimmt, das dazu mit HCl bis zur 6fachen Molarität versetzt wird. Der DPV-Bereich wird von –0,5 bis –0,1 V ausgenützt (E _p f:ur Sb(V) und Sb(III) ist –0,30 V). Das Verfahren wurde für Gläser verschiedenster Zusammensetzung angewendet. Die Ergebnisse wurden mit den Resultaten der Spektrophotometrie und der coulometrischen Titration verglichen.

---

---

Presented at the 8th International Microchemical Symposium, Graz, August 25–30, 1980.