Characterization and electrochemical investigation of boron-doped mesocarbon microbead anode materials for lithium ion batteries

The structure and anodic performance of boron-doped and undoped mesocarbon microbeads (MCMBs) have been comparatively studied and the results obtained by XPS, XRD, SEM, Raman spectroscopy and electrochemical measurements are discussed. It is found that boron doping introduces a depressed d ₀₀₂ spacing and the larger amount of "unorganized carbon", which induces vacancy formation in the graphite planes and leads to a quite different morphology from that of the undoped material. Electrochemical charge/discharge cycle tests indicated that after boron doping the lithium intercalation was carried through at a somewhat higher potential, being attended by greater irreversible capacity loss. Electronic Publication     

缩聚反应合成侧链液晶聚合物

侧链液晶聚合物的合成方法,可归纳为3类:一是烯基的单体,如甲基丙烯酸酯,或丙烯酸酯,氯代丙烯酸酯等,经自由基聚合反应,阴离子聚合反应及甲基丙烯酸酯的基团转移聚合反应,得到侧链液晶聚合物;二是变性反应,如聚硅氧烷与丙烯酸酯介     

Enhanced deep-red emission in donor-acceptor molecular architecture: The role of ancillary acceptor of cyanophenyl

Cyanophenyl as ancillary acceptor to modify donor-acceptor compound,plays an effective role in shifting the emission color to deep red and maintaining the luminescent efficiency.     

扫描近场光学显微镜对纳米结构的观察

光学显微镜在人们认识微观世界的过程中一直扮演着非常重要的角色．随着认识的深入，对空间分辨率的要求也越来越高．但是众所周知，普通光学显微镜（远场情况下）的分辨率受光的衍射效应所限制，一般可表达为0．61A／N．A．（约等于A／2，A为照射光的波长，N．A．为数值孔径）     

Emissive Annular Digold(I) Compounds Containing Diphosphine and Dithiolate Ligands

Molecular structures of three emissive annular digold compounds [Au₂(dmpm)(dtc)]Cl (dmpm = Me₂PCH₂PMe_2,dtc = S₂CNEt₂), 1 , [Au₂(dppm)(dtc)]PF₆, (dppm = Ph₂PCH₂PPh₂),₂,and [Au₂(dppe)(dtc)]-(PF₂) (dppe = Ph₂P(CH₂)₂PPh₂), 3, were determined. All three compounds are dimetallacycles having two gold atoms bridged by a dithiolate ligand and a diphosphine ligand, the geometry around each gold atom being almost linear. All the dimetal lacy die rings are slightly distorted from planarity with intramolecular Au-Au distances shorter than 3.0 Å. Compound 1 forms a polymeric chain through intermolecular Au-Au contacts (3.061 ? 3.135 Å). Compound 2 forms a tetramer through intermolecular Au-Au interactions (Au-Au distances ranging from 3.086 to 3.222 ). Compound 3 is monomeric. All of the compounds luminesce at 77 K in the solid state. Emissions originating from ³LMCT from dtc ligand to Au excited states are assigned. The emission maxima of 1 ? 3 are at 541,535 and 520 nm respectively and are blue shifted as the number of Au-Au interactions is decreased.     

Separation and preconcentration of ultratrace lead in biological organisms and its determination by graphite furnace atomic absorption spectrometry

A biological organism (chitosan) was utilized to preconcentrate lead ions from tap water. This preconcentration was achieved by mixing 0.8 ml of chitosan slurry with 10-50 ml of lead-containing solution and subsequently separating by centrifugation. The chitosan paste was then dissolved in 1 ml of 0.2% nitric acid and analysed by graphite furnace atomic absorption spectrometry. The extraction efficiency can approach 100% in the pH range 4-10. The amount of chitosan used was not critical. The effect of some impurities was also investigated. If six samples were prepared simultaneously, the time needed to preconcentrate each sample was less than 3 min. Two different modes of standard addition (the standard lead solutions being added before and after preconcentration) were used for analysis of tap water samples, and the results obtained by the two modes were found to be quite consistent.     

Formation,growth mechanism and packing sequences of binary alloy cluster anions from laser ablation of mixtures of lead and transition metals

By using laser ablation of the mixtures of a transition metal (M: Ti, Cr, Mn, Fe, Co, Ni, Cu, Zn, Pd, Ag) plus lead, M/Pb binary cluster anions were observed except for Zn, and the number of transition metal atoms contained in the binary clusters is at most 4. This behavior is different from that reported previously for M/Ge binary clusters. The experiments indicate that it is also very difficult to form Al/Pb clusters. The distribution patterns of M/Pb binary alloy cluster anions are remarkably similar to those of pure Pb clusters, consistent with a formation mechanism in which transition metal atoms are sequentially attached to [M(x-1)Pb(y)](-) clusters and thus form [M(x)Pb(y)](-) clusters by a simple condensation process. As the number of transition metal atoms increases, the intensities of binary clusters gradually decrease. It is proposed that [MPb(4)](-) and [MPb(5)](-) cluster anions might be the unit building blocks of M/Pb binary cluster anions, and the layer packing sequences for magic clusters are predicted on this basis. The [M(x)Pb(y)](-) binary clusters containing 13 atoms (x + y = 13; x not equal 0) are proposed to have an icosahedral structure.     

Infrared-optical properties of vapour-deposited metal films

Spectroscopic infrared ellipsometry was applied to determine the optical constants of thin metal layers deposited on dielectric substrates such as glass or CaF(2). The layers were produced by evaporating gold or silver in a vacuum, and the coverage, that is the deposited mass per area, was chosen in the range 80-1200 mg m(-2) for gold, which refers to thicknesses in the lower nanometer range; in the case of the specifically lighter silver, about half the coverage was applied. At low coverage a metal island structure is obtained, which gives rise to surface-enhanced infrared absorption (SEIRA). Depending on the coverage, the deposited films exhibit either dielectric or metallic optical properties. Atomic force microscopy and conductivity measurements complement the spectroscopic observation.     

高分辨等离子体质谱法直接测定高纯镓中的痕量元素

建立高分辨电感耦合等离子体质谱法(HR-ICP-MS)测定高纯镓样品中Be、Mg、A l、S i、Ti、V、Cr、Mn、Fe、Co、N i、Cu、Zn、Ge、As、Mo、Ag、Cd、In、Sb、Ba、Pb、B i等痕量元素的方法。样品用HNO3 HC l经微波消解后,试液直接进样用HR-ICP-MS法同时测定上述元素,在高分辨质谱测量模式下避免了大量的质谱干扰,详细地研究了HC l和高纯镓所产生的基体效应,以Sc、Rh、Tl作为内标元素校正了基体效应,讨论和确定了实验的最佳测定条件。结果表明,23种痕量元素的检出限在0.001~0.21μg/L之间;回收率在89.8%~111.6%之间,相对标准偏差(RSD)小于3.3%。     

Computer optimization of small atomic clusters

We have successfully identified stable configurations of both rare-gas and NaCl clusters with a new optimization procedure. An initial cluster configuration is prepared in a so-called shoot-and-stay process. Its total energy is then minimized with respect to the atomic coordinates. To prevent the system from being locked in local minima, the step size of each move is chosen as the width of the energy well at a higher level. As the system evolves, the global minimum is contained in the volume bounded by the decreasing value of step sizes. We have also carried out the optimization of NaCl clusters by the simulated annealing technique, for comparison. The results show that for such heterogeneous systems, the latter method cannot always find the global minimum, because of large energy gaps between different catchment regions in phase space.