Pogostone Enhances the Antibacterial Activity of Colistin against MCR-1-Positive Bacteria by Inhibiting the Biological Function of MCR-1

The emergence of the plasmid-mediated colistin resistance gene mcr-1 has resulted in the loss of available treatments for certain severe infections. Here we identified a potential inhibitor of MCR-1 for the treatment of infections caused by MCR-1-positive drug-resistant bacteria, especially MCR-1-positive carbapenem-resistant Enterobacteriaceae (CRE). A checkerboard minimum inhibitory concentration (MIC) test, a killing curve test, a growth curve test, bacterial live/dead assays, scanning electron microscope (SEM) analysis, cytotoxicity tests, molecular dynamics simulation analysis, and animal studies were used to confirm the in vivo/in vitro synergistic effects of pogostone and colistin. The results showed that pogostone could restore the bactericidal activity of colistin against all tested MCR-1-positive bacterial strains or MCR-1 mutant–positive bacterial strains (FIC < 0.5). Pogostone does not inhibit the expression of MCR-1. Rather, it inhibits the binding of MCR-1 to substrates by binding to amino acids in the active region of MCR-1, thus inhibiting the biological activity of MCR-1 and its mutants (such as MCR-3). An in vivo mouse systemic infection model, pogostone in combination with colistin resulted in 80.0% (the survival rates after monotherapy with colistin or pogostone alone were 33.3% and 40.0%) survival at 72 h after infection of MCR-1-positve Escherichia coli (E. coli) ZJ487 (blaNDM-1-carrying), and pogostone in combination with colistin led to one or more order of magnitude decreases in the bacterial burdens in the liver, spleen and kidney compared with pogostone or colistin alone. Our results confirm that pogostone is a potential inhibitor of MCR-1 for use in combination with polymyxin for the treatment of severe infections caused by MCR-1-positive Enterobacteriaceae.     

Deep level transient spectroscopy investigation of deep levels in CdS/CdTe thin film solar cells with Te:Cu back contact

Deep levels in Cds/CdTe thin film solar cells have a potent influence on the electrical property of these devices. As an essential layer in the solar cell device structure, back contact is believed to induce some deep defects in the CdTe thin film. With the help of deep level transient spectroscopy (DLTS), we study the deep levels in CdS/CdTe thin film solar cells with Te:Cu back contact. One hole trap and one electron trap are observed. The hole trap H1, localized at E_v+0.128~eV, originates from the vacancy of Cd (V_Cd. The electron trap E1, found at E_c-0.178~eV, is considered to be correlated with the interstitial Cu_i⁼ in CdTe.     

故障树模块化在装甲车辆灭火系统故障诊断中的应用

为了实现装甲装备灭火系统故障的快速诊断,提出了一种故障树模块化分析方法;对灭火系统故障树进行深度优先最左遍历,并记录遍历过程,按照遍历顺序对故障树中的每个事件进行标定,并将灭火系统故障树划分为相互独立的模块,依据划分的模块可以通过故障现象对模块内的故障进行排查及修复;实验结果分析表明,该方法可以快速修复模块故障,恢复系统功能,简化了以往对灭火系统所有子事件遍历查错的繁琐过程。该方法同样可以计算故障模块的失效概率,并可以实现故障模块的整体更换,恢复系统性能;证明了故障树模块化方法在灭火系统故障诊断中具有较高的效率,简化了灭火系统诊断流程,在装甲车辆其他系统故障诊断中具有借鉴作用,符合现代作战对于装备保障的需求。     

Effect of H impurity on misfit dislocation in Ni-based single-crystal superalloy： molecular dynamic simulations

The effect of H impurity on the misfit dislocation in Ni-based single-crystal superalloy is investigated using the molecular dynamic simulation.It includes the site preferences of H impurity in single crystals Ni and Ni 3 Al,the interaction between H impurity and the misfit dislocation and the effect of H impurity on the moving misfit dislocation.The calculated energies and simulation results show that the misfit dislocation attracts H impurity which is located at the γ/γˊinterface and Ni₃ Al and H impurity on the glide plane can obstruct the glide of misfit dislocation,which is beneficial to improving the mechanical properties of Ni based superalloys.     

光学扫描全息术中的孪生像噪音及消除

阐述了光学扫描全息术的基本原理,分析了孪生像噪音的来源,提出了一种新的数字滤波方法.计算机仿真结果表明:孪生像噪音以振荡形式传播,降低了重构图像的信噪比,影响了重构图像的分辨率;用电子复用技术,即用复全息图函数代替实全息图函数的方法可以有效地消除孪生像噪音;采用单一通道对信号进行处理,即只用一个实全息图函数,通过数字滤波方法同样可以消除孪生像噪音,该方法简便、实用而有效.     

激光辐照下皮肤组织光热响应有限元分析

为了更好地选择临床激光医疗曝光参量,采用有限元数值计算方法,模拟了脉冲激光与连续激光对人皮肤组织的光热作用及导致的温度变化效应,比较了两者的不同,得到了热响应时间及热弛豫时间与组织深度的关系,即组织越深(0～60 μm),其热响应时间(0～4 ms)与热弛豫时间(0.4～12.1 ms)越长;分析了激光脉宽长短对组织升温的影响;建立了评价脉冲间热损失的评价函数δ,并以此对脉冲间隔的选取作了探讨.     

N,O-羧甲基壳聚糖的合成和性质研究

采用多段升温法将壳聚糖改性 ,合成了取代度为 1.84、平均分子量为 3.0 8× 10 5、等电点为 7.2 8的N ,O 羧甲基壳聚糖 (CMC) ,分别用紫外光谱、红外光谱、荧光光谱对其结构进行了表征 ,并对其水溶液的Zeta电位、电导率、表面张力以及水分散体系中羧甲基壳聚糖微粒的粒径分布进行了研究 .结果表明 ,N ,O 羧甲基壳聚糖具有表面活性 ;介质的pH值和浓度对羧甲基壳聚糖溶液的稳定性有很大的影响     

Superhydrophobic Flexible Supercapacitors Formed by Integrating Hydrogel with Functional Carbon Nanomaterials

Main observation and conclusion With the rapid development of the wearable electronics,the flexible supercapacitor with high energy density has attracted more a...     

Effects of charge on the structures and spin moments of Nil3 cluster

The structural stability and magnetic properties of the icosahedral Ni13, Ni13^＋1 and Ni13^-1 clusters have been obtained by utilizing all-electron density functional theory with the generalized gradient approximations for the exchange-correlation energy. The calculated results show that the ground states of neutral and charged clusters all favour a D3d structure, a distorted icosahedron, due to the Jahn-Teller effect. The radial distortions caused by doping one electron and by doping one hole are opposite to each other. Doping one electron will result in a 1/2 decrease and doping one hole will result in a 1/2 increase of the total spin. Both increasing interatomic spacing and decreasing coordination will lead to an enhancement of the spin magnetic moments for Nil3 clusters.     

三氧化钨/氧化银复合材料的水热法合成及其光催化降解性能研究

染料污染是水污染中最严重的问题之一,吸引了很多科学家的关注.人们尝试了很多方法去解决该问题,如化学氧化法、物理吸附法、光催化降解法和生物降解法等.与其他几种方法相比,光催化法有着低能耗、环保以及高效等优势.三氧化钨是常见的半导体材料,具有独特的光学性能,近年来受到了广泛的研究.本文以钨酸钠和硫脲为前驱体,通过水热法制备了三氧化钨/氧化银(WO_3/Ag_2O)复合材料,并用光催化降解亚甲基蓝来分析其光催化性能.通过X射线光电子能谱、X射线衍射、透射电子显微镜、扫描电子显微镜、紫外可见吸收光谱等表征手段对样品的形貌、晶格结构和光催化的性能进行表征.氧化银的带宽为1.2 e V,对可见光很敏感,三氧化钨和氧化银的复合使材料在可见光下的光催化活性显著增强,在可见光下对亚甲基蓝染料的光降解率可以达到98%.实验结果表明,复合材料中的三氧化钨纳米棒为六方相,其平均直径约为200 nm,平均长度约为4μm.而复合材料中的氧化银纳米颗粒为六方相,附着在氧化钨纳米棒的表面,平均晶粒尺寸为20 nm.氧化银的存在为复合材料提供了更多的反应活性位点.相较于单一组分,复合材料在可见光下的光吸收度更高,这说明三氧化钨和氧化银的复合改变了材料的能带结构.研究发现,三氧化钨和氧化银之间形成的异质结构是其优良光催化性能的来源.此外,三氧化钨和氧化银复合材料还具有良好的催化稳定性和化学稳定性.本文结果表明,可以通过给宽带隙的半导体材料复合一些带隙合适的金属氧化物以提升其光催化活性.