具有四个状态可修复系统本征值分布

给出一类具有四个状态可修复系统算子预解式特性,对任意给定的δ>0,r=a+bi,固定a1,a2,使得-μ+δ相似文献   

CoPt(FePt)-C纳米复合膜的结构与磁性

用磁过滤脉冲真空电弧沉积方法制备了CoPt(FePt) C纳米复合薄膜，并在不同温度下进行了退火处理，研究了薄膜中碳的含量以及退火温度对薄膜结构与磁性能的影响.制备态薄膜经过足够高的温度退火后，x射线衍射和磁力显微镜分析发现，在碳基质中生成了面心四方相的CoPt(FePt)纳米颗粒.对于特定组分为Co24Pt31C45和Fe43Pt35C22的薄膜，矫顽力以及颗粒尺寸都随退火温度的升高而增大，当退火温度为700℃时，Co24Pt31C45薄膜的矫顽力为21×105A/m，晶粒尺寸为17nm;当退火温度为650℃时，Fe43Pt35C22相应值分别为28×105A/m和105nm. 关键词： 磁记录材料 磁性薄膜 CoPt FePt纳米复合薄膜     

脉冲激发三能级体系半导体量子点的单光子发射效率

研究了脉冲激发下单个半导体量子点中单光子发射的统计特性.在旋转波近似条件下，由系统粒子数演化主方程并结合量子回归理论推导了二阶相关函数的运动方程，利用此方程讨论了二阶相关函数随输入脉冲面积的关系.在窄脉冲宽度的脉冲激发下，单光子的发射概率p和效率η都随着强度的增强而产生振荡.研究表明，采用窄脉冲宽度，当输入脉冲面积在π附近时可以得到较高的单光子发射效率. 关键词： 半导体量子点 单光子发射 三能级系统     

Comparison of Yb-doped fiber laser with one-end and double-end pumping configuration

A high-power Ytterbium-doped fiber laser (YDFL) with homemade double clad fiber (DCF) is introduced in this paper. The output power characteristics of a linear cavity fiber laser have been studied theoretically by solving the rate equations and experimentally tested with single- and double-end-pumping configurations. When both ends of the fiber are pumped by two high-power laser diodes with a launched power of 300 W each, a maximum CW output of 444 W is obtained with a slope efficiency of 75%.     

Existence of Solutions for a Quasilinear Schrödinger Equation with Potential Vanishing

Acta Mathematicae Applicatae Sinica, English Series - We study the following quasilinear Schrödinger equation $$ - \Delta u + V(x)u - \Delta ({u^2})u = K(x)g(u),\,\,\,\,\,\,\,\,x \in...     

State-Independent Geometric Quantum Gates via Nonadiabatic and Noncyclic Evolution

Geometric phases are robust to local noises and the nonadiabatic ones can reduce the evolution time, thus nonadiabatic geometric gates have strong robustness and can approach high fidelity. However, the advantage of geometric phase has not been fully explored in previous investigations. Here,a scheme is proposed for universal quantum gates with pure nonadiabatic and noncyclic geometric phases from smooth evolution paths. In the scheme, only geometric phase can be accumulated in a fast way, and thus it not only fully utilizes the local noise resistant property of geometric phase but also reduces the difficulty in experimental realization. Numerical results show that the implemented geometric gates have stronger robustness than dynamical gates and the geometric scheme with cyclic path. Furthermore, it proposes to construct universal quantum gate on superconducting circuits, with the fidelities of single-qubit gate and nontrivial two-qubit gate can achieve 99.97% and 99.87%, respectively. Therefore, these high-fidelity quantum gates are promising for large-scale fault-tolerant quantum computation.     

线型聚能装药的理论研究

本文提出了一端起爆的线型聚能装药射流形成的不定常理论模型。根据这一模型,当金属罩在爆轰波作用下的运动速度为已知时,则不论此速度是否是时间或初始位置的函数,都能得到射流形成时的速度,质量和位置等参数。 按照本文模型,Defourneaux.M.的定常射流形成定常模型是一个简单的特例。我们利用本文的模型对等厚度装药的情况进行了计算,并与实验结果比较,两者符合良好。同时计算结果表明,考虑射流形成的不定常因素,可以较好地解释射流头部的质量堆积和射流内部的反向速度梯度等实验现象。本文的模型可以为线型聚能切割索的设计提供较为准确的理论指导。     

超音速气动雾化制粉机理的实验研究及分析

本文根据雾化模拟实验,提出了初次雾化模型。并利用已有超音速气动知识,对这一模型进行了定性的解释和定量的描述,给出粒度分布和冷却速率的解析表达式,对雾化工艺参数的选择有一定的指导意义。     

迎风通量差分分裂法对边界层特性的数值模拟

迎风通量差分分裂法作为一种高效率的数值方法,已被广泛地用于模拟各种复杂流场,但用这类方法模拟有边界层存在的超音速粘性流场时,必须保证通量差分分裂为守恒的;否则,将在边界层内引入一个可观的虚假人工扩散项和压力梯度项,歪曲了边界层特性。本文就这个问题进行理论和数值的研究。     

变深度螺旋槽止推轴承的边界元法计算

本文以分析变深度螺旋槽止推轴承为例介绍了边界元法在润滑力学研究领域中的应用,以及相应的边界条件的处理方法,同时还讨论了轴承的尺寸参数对其性能参数的影响。