Enantioselective Recognition for Carboxylic Acids by Novel Chiral Macrocyclic Polyamides Derived from L-/D-tartaric Acid

The enantioselectivity of chiral macrocyclic polyamides 1–3 derived from L-/D-tartaric acid was investigated by using ¹H NMR. All the macrocycles exhibited certain chiral recognition towards the enantiomers of the racemic carboxylic acids we had chosen. As a chiral solvating agent, the compound 3 has the excellent enantiomeric discriminating ability for mandelic acids and its derivatives, containing an α-OH at the chiral carbon, while the compound 2 has the best enantioselectivity towards dibenzoyltartaric acid. The molar ratio and the association constants of the compound 3 with each of the enantiomers of some guest molecules were determined by using the Job's plots and a nonlinear leastsquares fitting method, respectively. The effect of the structure of the hosts or guests on the enantioselectivity of the compound 1–3 has been explored.     

Physicochemical Characterization of Hydrated 4-Sulphonato-Calix[n]arenes: Thermal,Structural, and Sorption Properties

In this study, the thermal behavior of three hydrated water-soluble 4-sulphonato calix[n]arenes was investigated. The melting points, heats of fusion, and heats of solution of the calix[4]arene, calix[6]arene and calix[8]arene were 277, 262, and 270°C; 192, 242 and 351 kJ/mol; and 30, 58 and 63 kJ/mol, respectively. Lower heat of fusion, smaller increase in entropy and smaller heat of solution of the calix[4]arene compared to the calix[6]arene and calix[8]arene showed that less heat was required to break up the crystal lattice of the smaller macromolecule. This apparent anomaly is rationalized in terms of smaller cooperativity of interaction between the molecules of calix[4]arene in the crystal lattice, although the strength of the individual interactions is stronger as evidenced by the higher melting point. TGA analysis indicated that about 17–20% of water was associated with the calix[n]arenes. Both TGA and hot stage microscopy results indicated that upon heating these molecules underwent stepwise water loss. TGA kinetics showed that the 4-sulphonato-calix[8]arene lost water easier than the other two calixarenes. The moisture adsorption behavior of all calixarenes followed type II isotherms. For the same amount of material, the calix[6]arene adsorbed more moisture than the calix[4]arene and the calix[8]arene. Moreover, dehydrated less crystalline 4-sulphonic-calix[n]arenes powders are hydroscopic.

     

Two Thiourea-based Colorimetric Sensors for Anions: Structure and Binding Study

Two colorimetric thiourea-based chemsensors with two relatively rigid arms, 2A and 2B, were synthesized. Their binding abilities with halide anions, AcO^?, [Formula: See Text] were studied by UV-Vis spectroscopy in DMSO. The two sensors showed a notable selective color response to F^? anion from colorless to green-yellow in recognition. The structures of the two sensors and their binding behaviors are discussed. The association constants were calculated by nonlinear fittings of 1:1, 1:2 or 1:1 to 1:2.     

Three coordination polymers of 5-aminoisophthalic acid with similar benzimidazole derivative ligands: synthesis,structure and DNA-binding studies

Three novel coordination polymers, [Co(NH₂-Aip)(H₂Bibim)] _n (1), [Co(NH₂-Aip)(HBibimop)] _n  √ nH₂O (2) and [Mn(NH₂-Aip) √ H₂O] _n  √ 2nH₂O (3) with NH₂-Aip and similar benzimidazole derivative ligands (NH₂-Aip = 5-aminoisophthalic acid, H₂Bibim = 2,2′-bibenzimidazole and HBibimop = 1,3-bis(benzimidazol-2-yl)-2-oxapropane), have been synthesised under hydrothermal conditions and structurally characterised by single-crystal X-ray diffraction analysis, elemental analysis and IR spectroscopy. 5-Aminoisophthalic acid ligand adopts μ₂-, μ₃- and μ₄-bridge coordination fashion and benzimidazole derivatives exist as terminal- and bridge-mode in complexes 1–3. The intricate hydrogen bonds and π–π stacking interactions in supramolecular framework are discussed. Using the combination of ultraviolet–visible absorption titration and fluorescence spectra, the experimental results show that complexes 1 and 2 bind to DNA in an intercalative mode and their DNA-binding constants (K _b ) are also found.     

Synthesis of 3-[5-(biphenyl-4-yl)pyrrol-2-yl]-1-phenylprop-2-yn-1-ones by palladium-free cross-coupling between pyrroles and haloalkynes on aluminum oxide

Cross-coupling of 2-(biphenyl-4-yl)pyrroles derived from 1-(biphenyl-4-yl)ethanone oximes and acetylene with 3-bromo-1-phenylprop-2-yn-1-one on aluminum oxide gave 3-[5-(biphe-nyl-4-yl)pyrrol-2-yl]-1-phenylprop-2-yn-1-ones in 35–46% yields.     

Identification of reducing and nonreducing neutral carbohydrates by laser‐enhanced in‐source decay (LEISD) MALDI MS

In this work, laser‐enhanced in‐source decay (LEISD) technique of matrix‐assisted laser desorption/ionization Fourier transform ion cyclotron resonance mass spectrometry (MALDI‐FT‐ICR‐MS) was used to distinguish reducing and nonreducing carbohydrates. Interestingly, easier cleavage of (1 → 2)‐linked glycosidic bonds for nonreducing carbohydrates containing D‐fructofuranosyl units was observed in MALDI‐FT‐ICR‐MS, which was in agreement with the result of theoretical calculation by the software package Gaussian 09. Importantly, no cross‐ring cleavage of fructofuranosyl residues was detected in the LEISD spectra of nonreducing carbohydrates. LEISD method therefore offers an attractive alternative for fast and efficient differentiation of reducing and nonreducing carbohydrates, and the positions of nonreducing monosaccharide residues in a carbohydrate chain could be easily speculated. Copyright © 2013 John Wiley & Sons, Ltd.     

Magnesium boride sintered as high-energy fuel

Boron was chosen as fuel owing to its excellent thermodynamic values for combustion. The difficulty of the boron in combustion is the formation of a surface oxide layer, which postpones the combustion process, reducing the performance of the rocket engine. In this paper, magnesium boride was sintered as high-energy fuel as a substitute for boron. The combustion heat and efficiency of magnesium boride and boron were determined using oxygen bomb calorimeter. The combustion characteristics of magnesium boride were investigated by thermal analysis, chemical analysis, XRD, and EDS. Results show that the combustion performance of magnesium boride are better than that of amorphous boron in oxygenated environments. The evaporation of magnesium in magnesium boride combustion process prevent the formation of a closed oxide layer, leading to higher combustion efficiency.     

Studies on self-assembly hydrothermal fabrication and thermal stability of Chromium oxyhydroxide nanomaterials synthesised from Chromium oxide colloids

Chromium oxyhydroxide nanomaterials with narrow size-distribution were synthesised through a simple hydrothermal method. Experimental conditions, such as reaction duration and pH values of the precipitation process and hydrothermal treatment played important roles in determining the nature of the final product chromium oxyhydroxide nanomaterials. The effect of these synthesis parameters were studied with the assistance of X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy and thermogravimetric analyses. This research has developed a controllable synthesis of Chromium oxyhydroxide nanomaterials from Chromium oxide colloids.     

Excellent electrochemical performance of nitrogen-enriched hierarchical porous carbon electrodes prepared using nano-CaCO3 as template

Recently, tremendous research efforts have been concentrated on developing high-performance electrode materials to meet the ever-increasing energy and power demands in supercapacitors. Herein, we presented a high-capacity supercapacitor material based on nitrogen-enriched hierarchical porous carbons (NHPCs) synthesized by the carbonization of melamine formaldehyde resins using eco-friendly and inexpensive nano-CaCO₃ as template. The effects of carbonization temperature and template content on the porous structure and electrochemical characteristics were compared and discussed in detail. The prepared NHPCs possessed large surface area up to 834 m² g^?1 and high nitrogen content up to 20.94 wt %. As electrode material for supercapacitors, NHPCs exhibited superior electrochemical performances with high specific capacitance (190 F g^?1 at 20 A g^?1), outstanding rate capability (80 %), and excellent cycling stability (over 2,000 cycles at 5 A g^?1) in 1 M sulfuric acid media. The excellent electrochemical performances are due to the synergic effects of unique hierarchical porous microstructure, abundant nitrogen and oxygen functionalities, as well as high degree of graphitization framework.     

Facile electrochemical synthesis of a conducting copolymer from 5-aminoindole and EDOT and its use as Pt catalyst support for formic acid electrooxidation

5-Aminoindole and 3,4-ethylenedioxythiophene (EDOT) were copolymerized electrochemically on a carbon cloth (CC) electrode in an aqueous sulfuric acid solution. The as-prepared copolymer was characterized by cyclic voltammogram, SEM, and UV-vis and FT-IR spectra through which the electrochemical properties, structure, and composition of the as-obtained copolymer were determined. The electrochemical activity and stability of the as-formed copolymer are significantly improved in comparison with poly(5-aminoindole) due to the incorporation of EDOT units into the conjugated chain. The copolymer film-modified CC electrode was used as substrate for Pt particle deposition (denoted as Pt/copolymer/CC), and then, its catalytic activity towards formic acid electrooxidation was studied. Experimental results indicate that the catalytic activity of Pt/copolymer/CC towards formic acid electrooxidation is enhanced in comparison with that of Pt/homopolymer/CC, which can be attributed to the homogeneous distribution of Pt nanoparticles on the copolymer/CC substrate and the improved electrochemical activity of the copolymer film.