大鼠肾脏糖胺聚糖的种类及二糖组成分析

采用两步酶解和离子交换色谱从Wistar大鼠肾脏中提取糖胺聚糖,以醋酸纤维素薄膜电泳分析糖胺聚糖种类,以弱阴离子交换色谱分离各种糖胺聚糖.纯化后的糖胺聚糖分别经特定糖胺聚糖酶裂解,采用强阴离子交换高效液相色谱(SAX-HPLC)紫外检测分析其二糖组成.结果表明,Wistar大鼠肾脏糖胺聚糖主要由硫酸乙酰肝素和少量硫酸皮肤素组成.硫酸乙酰肝素含有8种二糖,其中含有乙酰基二糖总含量高达77.6%,非硫酸化二糖(Ⅳ-A)含量为59.7%;硫酸皮肤素含有6种二糖,其中单硫酸化二糖总含量为54.8%,非硫酸化二糖含量为32.9%.     

HfO_2单层膜的吸收和激光损伤阈值测试

薄膜吸收是降低膜层激光损伤阈值的重要原因,为了研究薄膜吸收对激光损伤阈值的影响,对HfO2单层膜在1 064 nm处的吸收及其在不同波长激光辐照下的损伤阈值进行了测试和分析。研究结果表明:薄膜的激光损伤阈值由薄膜吸收平均值(决定于薄膜中缺陷的种类和数量)和吸收均匀性(决定于薄膜中缺陷的分布)共同决定;根据HfO2单层膜在1064 nm波长处的吸收值,不但可以定性判断薄膜在1 064 nm波长,而且还可以判断在其它波长激光辐照下的抗激光损伤能力。     

A 20.1 W solid-state laser pumped by 887 nm with high efficiency and TEM<Subscript>00</Subscript> mode

High efficiency, TEM₀₀ mode, high repetition rate laser pumped by 887 nm is reported. 20.1 W output laser emitting at 1064 nm is achieved in a 0.3 at % Nd-doped Nd:YVO₄, which absorbs pumping light of 30.7 W at 887 nm. The opto-optic efficiency and the slope efficiency are 65.5 and 88.5%, respectively. The stable Q-switching operation worked well at 100 kHz and the beam quality is near diffraction-limit with M² factor measured as M² ≈ 1.2. And the pulse waveform is analyzed in this paper.     

新型电感储能脉冲功率驱动源

提出了将传统单个储能电感利用传输线分隔成两部分的新型电感储能脉冲功率驱动源技术方案。理论分析表明,利用传输线电容的耦合延时作用,可有效对调制器输出脉冲波形进行整形,并且可以进一步提高能量转换效率,从而克服传统电感储能脉冲功率源输出波形质量差(类三角波波形)的缺点。基于该思想开展了实验研究,获得了电压约300 kV,电流约20 kA的电子束,并成功驱动S波段磁绝缘线振荡器获得了百MW量级的微波输出。     

SETMOS实现多涡卷蔡氏电路的研究

基于细胞神经网络结构,利用具有负微分电阻特性的单电子晶体管与金属氧化物半导体混合结构器件SETMOS实现了多涡卷蔡氏电路.对该电路系统的基本动力学特性(如相图、分岔图、Lyapunov指数、Poincaré映射和功率谱)进行了理论分析和数值仿真,并利用电路仿真实验验证了该三阶四涡卷蔡氏电路设计的正确性和可行性.研究结果表明,SETMOS的负微分电阻特性决定着多涡卷蔡氏电路的复杂动力学行为,而且所设计的电路结构简单易行.     

Scheme for direct measurement of Wigner function in two-mode cavity QED driven by classical fields

We propose a scheme for the direct measurement of Wigner function in two-mode cavity QED.The atoms are sent to resonantly interact with two orthogonally polarized cavity modes in the presence of strong classical field.The probability of measuring the atom in the ground state directly gives the useful information of the cavity field.This method can be used for quantum non-demolition measurement of the photon number.     

High sensitivity conductivity-temperature-depth sensing based on an optical microfiber coupler combined fiber loop

In order to meet the practical needs of all-fiber conductivity-temperature-depth sensors with high sensitivity,compact structure,and easy packaging,this Letter uses a microfiber coupler combined with fiber loop(MCFL)reflective photonic device to conduct salinity,temperature,and deep sensing experiments.These MCFLs’dynamic range and resolution of salinity,temperature,and depth can meet the requirements of actual marine environment monitoring.This structure opens up a new design idea for the practical research of microfiber coupler-based marine environmental parameter sensors.     

Highly efficient excitation of LP_(01) mode in ring-core fibers by tapering for optimizing OAM generation

We have demonstrated the highly efficient excitation of the linearly polarized mode(LP01)in ring-core fibers(RCFs)by tapering the spliced point between the RCF and the standard single-mode fiber(SMF)to optimize all-fiber orbital angular momentum(OAM)generation.The tapering technique has been investigated theoretically and experimentally.Before tapering,only 50%of light can be coupled from SMFs to RCFs.The modal interference spectrum with an extinction ratio(ER)of～9 dB is observed,showing that higher-order modes are excited in RCF.By tapering the spliced point,90%of light is coupled,and the ER is minimized to be～2 dB,indicating that the higher-order modes are effectively suppressed by tapering.Such tapered spliced points of RCF–SMF are further applied for all-fiber OAM generation.The efficiencies of OAM+1 and OAM?1 generation are found to be enhanced by approximately 11.66%and 12.41%,respectively,showing that the tapered spliced point of the RCF–SMF is a feasible way to optimize OAM generation.     

Anisotropic phononic crystal structure with low-frequency bandgap and heat flux manipulation

This study presents a two-dimensional phononic crystal with heat flux manipulation and wide bandgaps of out-of-plane modes within the low-frequency range. The anisotropic matrix made of spiral-multilayered materials with different thermal conductivities, and the coating layer inserted with metal are designed for heat flux manipulation. Rubber-coated metal cylinders are periodically embedded in the anisotropic matrix to obtain the low-frequency bandgaps of out-of-plane modes. Numerical simulation is carried out to validate the heat and elastic characteristics of the spiral-multilayered anisotropic structure and reveal the effects of the laying angle and temperature on the bandgaps. Subsequently, a spiral-multilayered plate with periodic structures is studied, which shows an obvious vibration attenuation in the frequency ranges of the bandgaps and a deflected heat flux from the initial propagation direction. In the experimental investigation, the multi-phase spiral-multilayered anisotropic plate is simplified to a single-phase anisotropic plate made of aluminum. The characteristics of this type of anisotropic phononic crystal structure may pave the way for the design of a new kind of thermo-acoustic metamaterial serving in combined thermal and acoustic environments.     

Production and constraints for a massive dark photon at electron-positron colliders

Dark sector may couple to the Standard Model via one or more mediator particles.We discuss two types of mediators:the dark photon A’and the dark scalar mediatorΦ.The total cross-sections and various differential distributions of the processes e+e-→qqA’and e+e→qqφ(q=u,d,c,s and b quarks)are discussed.We focus on the study of the invisible due to the cleaner background at future e+e-colliders.It is found that the kinematic distributions of the two-jet system could be used to identify(or exclude)the dark photon and the dark scalar mediator,as well as to distinguish between them.We further study the possibility of a search for dark photons at a future CEPC experiment with s1/2=91.2 GeV and 240 GeV.With CEPC running at s1/2=91.2 GeV,it would be possible to perform a decisive measurement of the dark photon(20 GeV相似文献