X-ray spectra induced by slow highly charged Ar q + ions in collision with Nb surface

The X-ray spectra of Nb surface induced by Ar ^q+ (q = 16,17) ions with the energy range from 10 to 20 keV/q were studied by the optical spectrum technology. The experimental results indicate that the multi-electron excitation occurred as a highly charged Ar¹⁶⁺ ion was neutralized below the metal surface. The K shell electron of Ar¹⁶⁺ was excited and then de-excited cascadly to emit K X-ray. The intensity of the X-ray emitted from K shell of the hollow Ar atom decreased with the increase of projectile kinetic energy. The intensity of the X-ray emitted from L shell of the target atom Nb increased with the increase of projectile kinetic energy. The X-ray yield of Ar¹⁷⁺ is three magnitude orders larger than that of Ar¹⁶⁺. Supported by the National Natural Science Foundation of China (Grant Nos.10774149 and 10405025)     

Different types of bursting in Chay neuronal model

Based on actual neuronal firing activities, bursting in the Chay neuronal model is considered, in which V _K, reversal potentials for K⁺, V _C, reversal potentials for Ca²⁺, time kinetic constant λ _n and an additional depolarized current I are considered as dynamical parameters. According to the number of the Hopf bifurcation points on the upper branch of the bifurcation curve of fast subsystem, which is associated with the stable limit cycle corresponding to spiking states, different types of bursting and their respective dynamical behavior are surveyed by means of fast-slow dynamical bifurcation analysis. Supported by the National Natural Science Foundation of China (Grant Nos. 10432010, 10526002 and 10702002)     

Bi2Te3拓扑绝缘体表面颗粒化铅膜诱导的超导邻近效应

拓扑绝缘体的出现为寻找拓扑超导体和Majorana费米子提供了一种可能的途径. 在拓扑绝缘体Bi₂Te₃表面沉积极薄的不连续铅膜, 试图通过邻近效应感应出大片的超导区, 为下一步研究拓扑超导电性创造条件.借助四引线电输运测量实验, 在0.25 K的低温下看到了超流现象, 表明沉积在Bi₂Te₃表面的厚度小于20 nm的颗粒化铅膜能够诱导邻近效应, 并且使大片Bi₂Te₃超导. 关键词： 超导邻近效应 S-N-S结 拓扑绝缘体     

The Construction of Sandbag Microstructure in Polyamide 6/Ethylene-Propylene-Diene Terpolymer/Nanometer Calcium Carbonate Ternary Composite

A sandbag microstructure was constructed in Polyamide 6(PA6)/ethylene-propylene-diene terpolymer (EPDM)/nanometer calcium carbonate (nano-CaCO₃) ternary composites by the addition of maleinated EPDM (EPDM-g-MA) to reduce the interfacial tension between EPDM and PA6 and EPDM and nano-CaCO₃. Scanning electron microscopy (SEM) observation and differential scanning calorimetry (DSC) analysis revealed that the microstructure of the ternary composites evolved from the initial separated EPDM and nano-CaCO₃ dispersion structure to the sandbag structure and finally to the separated dispersion structure again with the increase of EPDM-g-MA content in the elastomer phase. The mechanical results showed the composites with the sandbag microstructure exhibited excellent toughness and stiffness.     

Preparation and Characterization of Chitosan-Blended Multiwalled Carbon Nanotubes

Composites comprised of chitosan (CS) and multiwalled carbon nanotubes (MWCNTs) were fabricated by milling and ultrasonication dispersion methods. Scanning electron microscopy images showed homogeneous dispersion of MWCNTs throughout the CS matrix for samples prepared by either ultrasonication or milling methods. Further, the crystallinity of the CS component was found to decrease with the addition of MWCNTs, although the decomposition temperature and the storage modulus (E′) of the samples were improved. The decomposition temperature for the composite prepared by milling was 7°C higher than that by the ultrasonication. Meanwhile, the E′ decreased relatively slowly with temperature in the dynamic mechanical analysis measurements. In addition, IR analysis implied an interaction between CS and MWCNTs, which likely originated from hydrogen bonds between the amino, hydroxyl, and carboxyl groups of the two components. Compared with the ultrasonication, milling was more effective to promote the formation of the hydrogen bonds between CS and the MWCNTs and thus enhance the thermal stability of CS.     

Rheological Behaviors of Poly(Vinylidene Fluoride)/“Bud-Branched” Nanotubes Nanocomposites

Bud-branched nanotubes, fabricated by growing metal particles on the surfaces of multiwall carbon nanotubes (MWCNTs), were used to prepare poly(vinylidene fluoride) (PVDF)-based nanocomposites. The melt viscoelastic behaviors of PVDF and its nanocomposites were characterized. The results showed that the introduction of both the MWCNTs and bud-branched nanotubes (MWCNTs-B) increased the storage modulus, loss modulus, and complex viscosity of the nanocomposites. However, the bud-branched nanotubes were more efficient to increase the elasticity than the MWCNTs that have relatively smooth surfaces. In particular, it was observed that the bud-branched nanotubes caused an increase of normal force and crossover modulus, while for MWCNTs, no variation in the normal force and a decrease of the crossover modulus were observed.     

Crystallization,Flame Retardancy and Mechanical Properties of Poly(Butylene Terephthalate)/Brominated Epoxy/Nano-Sb2O3 Composites Dispersed By High Energy Ball Milling

Nano-Sb2O3 particles and brominated epoxy resin (BEO) powders were dispersed in poly (butylene terephthalate) (PBT) by high energy ball milling (HEBM). Then the nanocomposites were prepared by a twin screw extruder. The influence of the nano-Sb2O3 particles on the crystallization, thermal stability, flame retardancy and mechanical properties of the PBT/BEO/nano-Sb2O3 composites were investigated by X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), limiting oxygen index (LOI), UL-94 tests and scanning electron microscopy (SEM). The results showed that the nano-Sb2O3 particles improved the crystallizability, thermal stability and flame retardancy properties of the PBT/BEO/nano-Sb2O3 composites. When the content of nano-Sb2O3 particles was 2.0?wt%, the LOI of nano-Sb2O3/BEO/PBT composites increased from 22.0 to 27.8 and the tensile strength reached its maximum value (62.44?MPa), which indicated that the optimum value of flame retardancy and mechanical properties of PBT/BEO/nano-Sb2O3 composites were obtained.     

Competing ferromagnetism and superconductivity on FeAs layers in EuFe2(As0.73P0.27)2

We have measured the spin-polarized electron momentum density distributions of EuFe2(As0.73P0.27)2 by magnetic Compton scattering (MCS) measurements. For the first time, we show direct evidence of competing ferromagnetism and superconductivity (SC) on FeAs layers in this iron pnictide system. The MCS orbitalwise decomposition of the density distributions reveals that between 16 and 19 K, the spin-polarized Fe-3d character is enhanced (as the ferromagnetic character supersedes superconducting character), where the resistivity shows a maximum, reentrant SC-like peak, at 18 K. The spin polarization of the Fe-3d orbital, enhanced by ferromagnetic Eu ions, suppresses the SC around 18 K, while at other temperatures the system indeed exhibits SC where the Fe-3d spin polarization is suppressed or collapses.     

Design of dispersive multilayer with particle swarm optimization method

<正>We present a new and efficient method for the design of dispersive multilayer by employing a particle swarm optimization(PSO) technique.Its mathematical background is given and an adaptive PSO is realized with computer code.Two practical designing tasks are solved with this method,and the obtained results are competitive compared with other published structures.The adaptive PSO method demonstrates its merits of fast convergence and powerful global search ability,and could be used as a valuable tool for the optical thin film design.     

Centrally controlled quantum teleportation

Through designing a quantum communication network, we propose a protocol for the teleportation between multiple senders and multiple receivers via only one controller. In order to rationally employ the quantum entanglement resources, the controller shares the entangled state with every sender, while there is no directly shared entanglement link between sender and receiver. The security is analyzed in detail. Moreover, this protocol reduces the classical communication cost in the public channel by means of the coding.