Pulsed-laser-induced transformation path of graphite to diamond via an intermediate rhombohedral graphite

The new phase transformation of hexagonal graphite to cubic diamond was experimentally produced without catalyst, using a high-power pulsed laser. Interestingly, by the X-ray diffraction spectra, it was proved that this transition was not direct, but through an intermediate rhombohedral phase. Furthermore, it is important that the rhombohedral phase, as the theoretical transformation path of hexagonal graphite to cubic diamond, was first truly substantiated by our experimental results. The transformation mechanism was suggested that diamond with hexagonal structure was obtained by the direct transforming of hexagonal graphite to hexagonal diamond, and diamond with cubic structure was formed by the indirect transforming, i.e., hexagonal graphite to rhombohedral graphite to cubic diamond. Received: 7 February 2000 / Accepted: 28 March 2000 / Published online: 9 November 2000     

丝电爆过程的电流导入机理

丝电爆制备纳米粉时, 电流从电极导入金属丝的过程直接影响电极烧损和粉末中微米级大颗粒产生. 分别通过接触和气体放电两种方式导入电流进行电爆试验. 结果表明, 光测量装置检测到的丝端部光电流几乎与回路放电电流同时产生, 而中间位置的光电流则要滞后一段时间; 由探针收集的产物确定, 金属丝端部主要形成熔融粒子, 中间部分主要形成气相粒子. 分析可知, 接触方式导入电流时, 丝端部也存在气体放电现象, 大电流主要通过气体放电形成的等离子体导入. 等离子体对电流的旁路作用会阻碍能量向金属丝沉积, 这是产生微米级大颗粒和"积瘤"主要原因. 通过气体放电方式导入电流时, 电极烧损明显减轻, 并可以避免"积瘤"产生.     

甲醇在γ-Al2O3,CeO2及其负载Pd催化剂上吸附和分解的原位红外光谱研究

利用原位傅里叶变换红外光谱 (FTIR)技术对甲醇在γ Al2 O3,CeO2 以及Pd/Al2 O3,Pd/CeO2 催化剂上的吸附和分解行为进行了研究。综合考虑了载体和活性组分的作用 ,分析了甲醇在不同载体负载Pd催化剂上可能的分解途径。在Pd/CeO2 催化剂上 ,活性组分和载体对甲醇分解的过程表现出了一种协同效应。     

用于POF的高性能共振腔发光二极管

提出用AlGaAs材料为n型下DBR,AlGaInP材料为p型上DBR,GaInP/AlGaInP多量子阱为有源区来制备650nm波长的共振腔发光二极管（RCLED）.用传输矩阵法对器件的结构进行了理论设计,并制备了RCLED和普通LED两种结构.测试结果表明,RCLED有更高的发光效率,是普通LED的近1.3倍,当注入电流从3mA增加到30mA时,RCLED的峰值波长只变化了1nm,而普通LED的波长则变化了7nm,且RCLED的光谱半宽窄,远场发散角小. 关键词： 发光二极管 共振腔 金属有机物化学气相淀积     

Short Tm3+-doped fiber lasers with watt-level output near 2 μm

High-power operation of diode-pumped fiber lasers at wavelength near 2μm are demonstrated with short length of heavily Tm3 -doped silica glass fibers. With 7-cm long fiber, a laser at near 2 μm is obtained with the threshold of 135 mW, maximum output power of 1.09 W, and slope efficiency of 9.6% with respect to the launched power from a laser diode at 790 nm. The output stability of this fiber laser is within 5%.The dependence of the performance of fiber lasers on the operation temperature and cavity configuration parameters is also investigated.     

加强型Bi-2212超导股线有限元拉伸性能分析

为探究加强型Bi-2212超导股线的力学性能以及不锈钢包带对超导股线力学性能的影响,运用Ansys软件建立加强型Bi-2212超导股线的三维模型,采用有限元分析方法,对其机械结构进行仿真,模拟高温高压热处理后轴向受拉形变量和应力应变分布情况。仿真结果显示,在同样施加100 N拉力的情况下,与超导原线（Bi-2212超导线）相比,密绕Ni₈₀Cr₂₀包带后的加强型Bi-2212超导股线轴向受拉形变程度减小,约10%;应力应变均降低,约30%。采用Ni₈₀Cr₂₀作为外包带制成的加强型Bi-2212超导股线力学性能显著,是未来超导线发展方向之一。     

Properties of train traffic flow in a moving block system

The development direction of railways is toward the improvement of capacity and service quality, where the service quality includes safety, schedule, high speed, and comfort. In light of the existing cellular automaton models, in this paper, we develop a model to analyze the mixed running processes of trains with maximal speeds of 500 km/h and 350 km/h respectively in the moving block system. In the proposed model, we establish some sound rules to control the running processes of a train, where the rules include the departure rules in the intermediate stations, the overtaking rules, and the conditions of speed limitation for a train stopping at a station or passing through a station. With the consideration of the mixed ratio and the distance between two adjacent stations, the properties of the train traffic flow (including capacity and average speed) are simulated. The numerical results show that the interactions among different trains will affect the capacity, and a proper increase of the spatial distance between two adjacent stations can enhance the capacity and the average speed under the moving block.     

混沌系统平均初始误差增长饱和特性研究

在非线性误差增长理论框架下研究了混沌系统平均初始误差增长饱和特性 以及误差饱和值同系统可预报期限的关系.首先探索了Lorenz96系统中平均相对初始误差增长饱和规律, 发现平均相对初始误差增长饱和值同初始误差的自然对数存在简单的线性关系: 其二者自然对数之和为一常量,且该常量同初始误差无关.实验表明该结论对其他混沌系统也适用. 因此对给定混沌系统,在计算出和常数后可以外推得到任意固定初始误差的平均相对误差增长饱和值. 为进一步研究误差饱和值同可预报期限的关系,给出了平均绝对误差增长的定义. 理论分析表明混沌系统平均绝对误差增长也会达到饱和.其饱和值为常量, 与初始误差无关,混沌系统控制参数确定,饱和值就固定.依据上述研究, 最后给出一个定量计算可预报期限的模型T_p=1/∧ln(E_s/δ₀)+c, E_s为绝对误差增长饱和值.实验研究表明对于复杂的高阶混沌系统,该预报期限模型都能较好地适用.     

带电多孔二氧化硅纳米颗粒在硫醇/磷脂混合双层膜上的非特异性吸附

制备了表面带阴/阳离子的多孔二氧化硅纳米颗粒, 通过QCM-D研究了颗粒在不同pH值环境下与磷脂膜的非特异性吸附情况. 结果表明, NH₂-MSN 在4–8的pH值范围内与磷脂膜相互吸引, 而COOH-MSN由于与磷脂膜的电性始终保持一致而无法发生吸附现象. 本研究能够帮助理解和预测纳米颗粒与细胞膜间的相互作用, 为药物输运提供载体, 有助于多孔二氧化硅纳米颗粒在药物输运体系中的应用. 关键词： 多孔二氧化硅纳米颗粒 磷脂膜 非特异性吸附 QCM-D     

牙齿组织光热动态特性仿真与试验研究

调制激光作用牙齿组织发生散射形成光子密度波, 而由于光热效应产生热波, 基于一维介质辐射传输漫射近似方程与一维热传导方程建立了调制激光作用牙齿组织半透明混合介质的一维热波数学模型. 利用该模型仿真分析了牙齿龋损特性参数(牙釉质龋损层光吸收系数、散射系数、热扩散系数及龋损深度)对光热辐射动态响应特性的影响与规律. 利用红外探测器(HgCdTe, 2–12 μm)记录808 nm半导体激光激发牙齿组织产生的热波信号, 由锁相放大器计算热波信号的幅值与相位. 通过频率扫描试验获得了牙齿组织的光热动态响应, 利用多参数最佳统计拟合方法得到了牙齿组织特性参数. 结果表明光热辐射测量对牙齿组织不均匀性和龋损特性均具有较高敏感性与特异性.