Preconcentration of trace antimony in tap and sea water on activated alumina. Determination by graphite furnace atomic absorption spectrometry

Summary A method is described for antimony preconcentration based on retention on a column of activated alumina. Recovery is 80% when no pH-control and 4 mol/l HCl as eluent are used. The preconcentration factor is 400. The method was applied to the determination of antimony in spiked tap and sea water. The analytical performance of the method is discussed.     

TEM investigations on PECVD-titanium carbide layers

TiC_x-PECVD-layers were characterized by TEM. EDX analysis and electron diffraction. TiC_x-layers deposited using benzene showed a columnar structure, at which the column size decreases with rising excess carbon content. TiC_x-layers deposited using n-heptane presented a lamellar structure, at which the lamellar thickness diminishes with an increasing excess carbon content. In dependence on the layer thickness a periodic progress of the element contents was observed, at which a maximum for Ti and Cl correlates with a minimum for C. It was found that the incorporated chlorine is bonded to titanium. The lattice parameter depends on the chlorine content. Using TiCl₄/H₂/Ar-gas mixtures without any hydrocarbon, layers containing TiH₂ are formed.     

Chemometric approaches in environmental problems concerning PCDD and PCDF. Data interpretation and source correlation. Mechanisms of formation and destruction in MSW combustion process

Summary The role of multivariate analysis methods in evaluating, rationalizing, and working out complex environmental problems is discussed. The discussion is organized in two sections; a literature analysis of the application of chemometric methods to PCDD/PCDF data interpretation and source correlation and a review of the role of chemometric methods in analysing the results obtained by the Authors studying PCDD/PCDF formation and destruction mechanisms in MSW combustion processes.     

Trace determination of Tl, Cu, Pb, Cd, and Zn in specimens of the limnic environment using isotope dilution mass spectrometry with thermal ionization

Within the framework of the German Environmental Specimen Bank program, Tl, Cu, Pb, Cd and Zn were determined in homogenized materials from the limnic environment using Isotope Dilution Mass Spectrometry (IDMS) with thermal ionization. The analytical procedures which were developed for the trace metal analysis of bioindicator and sediment samples are described in detail. Results obtained in bream, mussels (Dreissena polymorpha) and sediments of Lake Constance/Estuary of Constance in the sampling years 1981, 1985, 1988, 1990, 1992 and 1993 are discussed and compared with those of bream from the lakeland district of Born-hoeved/Lake Belau and from the River Saar as well as from reference materials.     

Model calculations of interface segregation in dilute systems

Using a discrete model for the segregation kinetics based on the Darken theory of diffusion and on the regular solution model (RSM), one and two dimensional simulations of interface segregation in binary and ternary systems have been performed. The aim of the calculations was to investigate the kinetics of segregation sequences in ternary systems, the segregation kinetics in discrete systems during the initial phase and finally the kinetics of surface segregation in the region of a grain boundary intersected by the surface.     

Strategies for the development of a voltammetric sensor for the determination of hydrogen peroxide at high concentrations

Different strategies are presented for the development of a voltammetric sensor for in-line measurement and monitoring of H₂O₂ in high concentrations (up to 30 g/l) as used in textile bleaching systems. When using macroelectrodes, signal saturation is observed even at medium concentrations. Some improvement can be achieved by hydrodynamic electrodes like ring-disk electrodes. Satisfactory results up to the desired level in practical solutions (possessing only limited conductivity) are obtained with Pt-microelectrodes.     

HPLC with amperometric detection for the determination of pesticides of high polarity

A relatively simple procedure is described for the selective and highly sensitive determination of amitrole (3-amino-1,2,4-triazole) by ionpair HPLC with amperometric detection. The separation was achieved on a polar CN-column using hexane, propanol, water (62:36:2) with LiClO₄ (2.5 g·l^–1) and trichloroacetic acid (2 g·l^–1) as electrolytes. The determination range lies between 500 pg and 500 ng and the limit of detection was found to be 200 pg (s.d.: 11%; N=9). The minimum detectability for the alternative UV-monitoring was 2.5 ng. The developed method may be helpful in production and quality control and for the selective determination of amitrole in commercial formulations.     

Resonance ionization spectroscopy for trace analysis and fundamental research

Resonance ionization spectroscopy (RIS) and its combination with mass spectrometry (RIMS) have grown to become powerful techniques, which offer high sensitivity as well as elemental and isotopic selectivity. The principles of RIS and RIMS are introduced; they primarily concern the analysis of the optical spectra for the choice of efficient excitation schemes and the suitable design of the experimental apparatus. Recent applications span from studies of short-lived isotopes at on-line mass separators to a wide variety of trace analysis applications for radioactive isotopes, which can range from measurements of solar neutrino flux to environmental assessment.On leave from Pacific Northwest Laboratory, Richland, USA