Construction and validation of an automated spray-and-trap gas chromatograph for the determination of volatile organic compounds in aqueous samples

An automated spray-and-trap (ST) chromatographic system was constructed for fast and efficient extraction of volatile organic compounds (VOCs) in aqueous samples with the capability to be deployed in the field for unattended continuous monitoring of surface or ground water. This system was built upon a commercial gas chromatograph with full automation capability using self-developed hardware and software. For sample analysis, fine droplets of the aqueous solution were generated in the extraction chamber by pressure expansion of a clean air stream through a spray nozzle. A portion of the VOCs distributed into the gas phase was retained by a multi-sorbent micro-trap kept at ambient temperature. Flash heating of the sorbent trap desorbed the enriched VOCs onto the gas chromatography (GC) with flame ionization detection (FID) for hydrocarbons or electron-capture detection (ECD) for halocarbons. In order to validate the performance of the ST method. it was compared with a more conventional method, i.e., a purge-and-trap (PT), by analyzing a serious of standard solutions containing benzene, toluene, ethylene. and o-, m-xylenes. Using a purge-and-trap method as a reference for complete extraction, the ST method showed less sensitivity. Extraction recoveries are in consistent with Henry's law constants. To test response time the ST-GC-ECD was periodically switched between tap and underground waters. Negligible carry-over of halogenated species and reproducibility better than 2% relative standard deviation (R.S.D.) can be achieved regardless of large concentration difference between the two sources, thus demonstrating applicability of the ST system for on-site monitoring.     

Solvent-mediated folding of a doubly charged anion

The microsolvation of the suberate dianion, -O2C(CH2)6CO2-, with two separate charge centers was studied by photoelectron spectroscopy and molecular dynamics simulation one solvent molecule at a time for up to 20 waters. It is shown that the two negative charges are solvated in the linear suberate alternately. As the solvent number increases, the negative charges are screened and a conformation change occurs at 16 waters, where the cooperative hydrogen bonding of water is large enough to overcome the Coulomb repulsion and pull the two negative charges closer through a water bridge. This conformation change, revealed both from the experiment and from the simulation, is a manifestation of the hydrophilic and hydrophobic forces at the molecular level.     

8-羟基喹哪啶固相萃取光度法测定水样中的铁

研究了8-羟基喹哪啶与铁的显色反应，在pH为8．0的氯化氨-氨水缓冲介质中，在十六烷基三甲基溴化铵(CTMAB)存在下，8-羟基喹哪啶与铁反应生成3：1稳定的蓝紫色络合物，该络合物可被Waters Sep-Park-C18固相萃取小柱萃取，用乙醇洗脱后用光度法测定，络合物λmax=600nm。在此波长下其它金属离子的络合物无光吸收，对铁选择性很好，铁含量在0-5mg/L内符合比尔定律，方法用于水样中痕量铁的测定，结果令人满意。     

面向化妆品产业升级的江南大学应用化学专业建设思考与实践

Based on the development prospect of cosmetics industry, the advantage of light industry characteristic and the foundation of applied chemistry in Jiangnan University, a systematic upgrading of applied chemistry was carried out through "emerging engineering education (3E)" project "upgrade and practice of chemistry-related majors of local and/or trade university responding to the social developments" supported by the Ministry of Education. On the basis of investigation and analysis, the orientation and training goal of applied chemistry were updated first, and then the curriculum system was determined and the curriculum construction is strengthened, so as to achieve more distinctive characteristics, more solid foundation and more comprehensive quality. In view of the new requirements of the 3E for talent training, some practices have been formed in the aspects of multi-disciplinary integration, multi-angle coordination and close integration to industry. Contributing the development of cosmetics industry and seizing the commanding point of science and technology from the perspective of talent training, will play a unique role in human social progress.     

聚全氟丙醚油微观结构的研究

聚全氟丙醚油是一种新型的性能独特的润滑油。本实验采用~（１９）Ｆ－ＮＭＲ波谱法，结合~１Ｈ－ＮＭＲ和ＭＳ法，较详细地研究了油品微观结构。由谱线的化学位移和强度归纳出不同链节结构的分布，同时阐明了端基结构。     

Nd—Al双金属活性体的组成及其对共轭双烯烃的聚合

稀土Ziegler-Natta催化剂活性体对双烯烃配位聚合的研究已有很多报道。作者曾从NdCl_3·3P_(350)~(**)-Al(i-Bu)_3体系分离出Nd-Al双金属活性体。本文从NdCl_3·3P_(350)-HAl(i-Bu)_2和Al(C_2H_5)_3反应体系中分离出一系列Nd-Al双金属活性体,用元素分析方法研究了这些活性体的组成,并综合考察了在无助催化剂AlR_3存在下从不同烷基铝获得的活性体本身对共轭双烯烃的定向聚合能力。 单体、溶剂、HAl(i-Bu)_2、Al(C_2H_5)_5及活性体的合成,聚合方法,聚合物表征均按文献[4]。     

Encrypting Chemical Reactivity in Protein Sequences toward Information‐Coded Reactions†

Controlling chemical reactivity has been the central theme in chemistry. Herein, we review the recent progress on the development of genetically encoded protein coupling reactions and their potential applications. The chemical reactivity is encoded in the protein sequences. The information is read out by folding and molecular recognition between two reactive components and subsequently translated into chemical bonding via autocatalysis. It has emerged as a unique way to tune the chemical reactivity and is regarded as one type of information‐coded reactions. Not only has it received many applications such as protein topology engineering, bioconjugation, biomaterials and synthetic biology, but also its principle may be extended beyond protein chemistry to enable new modes of supramolecular interactions that promote chemical bonding and that are simultaneously reinforced by covalent bonds.     

Sensitive Determination of DNA by Resonance Light Scattering with Pentamethoxyl Red

A novel sensitive method for the determination of nucleic acid (DNA) using the resonance light scattering (RLS) spectra of pentamethoxyl red has been developed. It is based on the effects on the resonance light scattering of Pentamethoxyl Red. The effective factors and the optimum conditions were studied, and the enhanced intensity of RLS is in proportion to the concentration of nucleic acids in the range of 0–2.54 µg mL⁻¹ for ct-DNA, 0–4.54 µg mL⁻¹ for hs-DNA. The limits of detection are 1.1 and 2.1 ng mL⁻¹, respectively. Most foreign substances do not interfere in the determination, and the method has good selectivity and high sensitivity. It has been applied to the determination of DNA in synthetic samples and in real samples with satisfactory results.     

Theoretical study on electronic structure and optical properties of phenothiazine-containing conjugated oligomers and polymers

The application of polyfluorenes in polymeric light-emitting diodes has been hampered because of the charge injection difficulties and the troublesome formation of a tailed emission band at long wavelengths (>500 nm) during device fabrication and operation, leading to both a color instability and reduced efficiency. The incorporation of the phenothiazine units has been proven to significantly enhance the hole injection and charge carrier balance and at the same time efficiently suppress the keto defect emission. In this contribution, we apply quantum-chemical techniques to investigate poly[10-(N-(2'-methyl)phenothiazine-3,7-diyl) and its fluorene copolymer poly[10-(N-(2'-methyl)phenothiazine-3,7-diyl)-co-alt-2,7-(9,9-dimethylfluorene)] (PFPTZ) and gain a detailed understanding the influence of phenothiazine units on the electronic and optical properties of fluorene derivatives. Density functional theory (DFT) and time-dependent DFT approaches are employed to study the neutral molecules, HOMO-LUMO gaps (Delta(H-L)), the lowest excitation energies (E(g)'s), positive and negative ions, as well as the IPs and EAs, focusing on the superiority of the electronic and optical properties attributed to the introduction of electron-donating moiety phenothiazine (PTZ) through comparing with pristine polyfluorene. The outcomes show that the highly nonplanar conformation of phenothiazine ring in the ground state preclude sufficiently close intermolecular interactions essential to forming aggregates or excimers. Furthermore, the HOMO energies lift about 0.4 eV, and thus, the IPs decrease about 0.3 eV in PFPTZ, suggesting the significant improved hole-accepting and transporting abilities, due to the electron-donating properties of phenothiazine ring by the presence of electron-rich sulfur and nitrogen heteroatoms and highly nonplanar characters, resulting in the enhanced performances in both efficiency and brightness compared with pristine polyfluorene. In addition, even though the introduction of electron-donating moiety PTZ onto fluorene leads to a slight bathochromic shift in absorption and emission spectra, the copolymer still exhibited strong blue emission.     

Amperometric monitoring of lactate accumulation in rabbit ischemic myocardium

Fabrication and characterization of miniature, flexible, planar biosensors for monitoring l-lactate accumulation in an ischemic myocardium are described. Three configurations of Au-based electrodes were fabricated by a photolithographic technique on flexible polyimide Kapton((R)) foil. All sensors are based on an immobilized lactate oxidase with amperometric detection of the enzymatically produced hydrogen peroxide at a platinum-electroplated-gold base electrode polarized at 0.5 V versus Ag/AgCl. An inner electropolymeric layer is used to prevent electrode fouling and to reject the interference effects of easily oxidizable molecules. In addition, a diffusion controlling outer layer that greatly enhances the linear dynamic range of the sensor, is obtained by casting a polyurethane external film. The developed sensor was evaluated in vitro and proved to have high selectivity, good operational stability, good accuracy and precision (average recovery = 102.3 +/- 0.4% for control sera), fast response time (t(95) = 20 s) and high upper limit of the linear dynamic range (25-80 mM, with sensitivity of 1.7-0.4 nA mM(-1) respectively at PO(2) = 15 mmHg). Subsequently, the sensor was brought into direct contact with the surface of the rabbit papillary muscle and used for continuous quantitative monitoring of extracellular lactate accumulation during no-flow ischemia.