Turbulence modelling and role of compressibility on oil spilling from a damaged double hull tank

The viscosity plays an important role, and a multiphase solver is necessary to numerically simulate the oil spilling from a damaged double hull tank (DHT). However, it is uncertain whether turbulence modelling is necessary, which turbulence model is suitable; and what the role of compressibility of the fluids is. This paper presents experimental and numerical investigations to address these issues for various cases representing different scenarios of the oil spilling, including grounding and collision. In the numerical investigations, various approaches to model the turbulence, including the large eddy simulation (LES), direct numerical simulation and the Reynolds average Navier–Stokes equation (RANS) with different turbulence models, are employed. Based on the investigations, it is suggested that the effective Reynolds numbers corresponding to both oil outflow and water inflow shall be considered when classifying the significance of the turbulence and selecting the appropriate turbulence models. This is confirmed by new lab tests considering the axial offset between the internal and the external holes on two hulls of the DHT. The investigations conclude for numerically simulating oil spilling from a damaged DHT that when the effective Re is smaller the RANS approaches should not be used and LES modelling should be employed; while when the effective Reynolds numbers is large, the RANS models may be used as they can give similar results to LES in terms of the height of the mixture in the ballast tank and discharge but costing much less CPU time. The investigation on the role of the compressibility of the fluid reveals that the compressibility of the fluid may be considerable in a small temporal‐spatial scale but plays an insignificant role on macroscopic process of the oil spilling. Copyright © 2016 John Wiley & Sons, Ltd.     

Controlled release of acetochlor from poly (butyl methacrylate-diacetone acrylamide) based formulation prepared by nanoemulsion polymerisation method and evaluation of the efficacy

Acetochlor is an important herbicide for gramineous weeds and some small seed broadleaf weeds. Controlled-release formulations of herbicide are highly desirable not only for attaining the most effective utilisation of the weed control, but also for reducing environmental pollution. Acetochlor was incorporated in poly (butyl methacrylate-diacetone acrylamide) based formulation to obtain controlled release properties. The acetochlor nanocapsules were characterised by size distribution, infrared spectroscopy (IR) and field emission scanning electron microscopy (FESEM), and factors related to loading efficiency, swelling behaviour of the formulation were investigated. For this controlled-release formulation, the loading efficiency could reach about 50% (w/w). n, the diffusion parameter was indicative of the transport mechanism, and the values for ‘n’ were in the range of 0.28–0.61, which indicated that the release of acetochlor was diffusion-controlled. The time taken for 50% of the active ingredient to be released into water, t₅₀, was also calculated for the comparison of formulations in different conditions. The formulation with higher temperature and more diacetone acrylamide had lower value of t₅₀, which means a quicker release of the active ingredient. This study highlighted some pieces of evidence that improved herbicide incorporation and slower release were linked to potential interactions between the herbicide and the polymer.     

Effect of spacer length on mesomorphic behaviours of chiral liquid crystal compounds containing (-)-menthyl

ABSTRACT

A homologous series of new chiral liquid crystal compounds, MnBEB (n = 4–10), was prepared by covalently linking a chiral (–)-menthyl with biphenyl-benzoate via a dicarboxylic spacer of varying length and parity. A combination of analysis methods, such as FT-IR, ¹H NMR spectra, differential scanning calorimetry (DSC), polarised optical microscopy (POM) and X-ray diffraction was carried out to systematically investigate their phase structures and phase transition behaviours. The length and parity of the flexible spacers has a profound influence on the T_m and T_c and a modest odd-even effect is observed for the chiral liquid crystal compounds MnBEB. Only compound M4BEB developed an N* phase with selectively reflection on heating and a blue phase on cooling process. In addition, increasing the length of the flexible spacers tends to narrow the temperature range of the N* phase and widen the smectic phase, moreover, the pitch becomes longer with the spacer increases.     

Validated UPLC‐MS/MS method for determination of moclobemide in human brain cell supernatant and its application to bidirectional transport study

A simple and sensitive analytical method based on ultraperformance liquid chromatography–tandem mass spectrometry (UPLC‐MS/MS) has been developed for determination of moclobemide in human brain cell monolayer as an in vitro model of blood–brain barrier. Brucine was employed as the internal standard. Moclobemide and internal standard were extracted from cell supernatant by ethyl acetate after alkalinizing with sodium hydroxide. The UPLC separation was performed on an Acquity UPLC^TM BEH C₁₈ column (50 × 2.1 mm, 1.7 µm, Waters, USA) with a mobile phase consisting of methanol–water (29.5:70.5, v/v); the water in the mobile phase contained 0.05% ammonium acetate and 0.1% formic acid. Detection of the analytes was achieved using positive ion electrospray via multiple reaction monitoring mode. The mass transitions were m/z 269.16 → 182.01 for moclobemide and m/z 395.24 → 324.15 for brucine. The extraction recovery was 83.0–83.4% and the lower limit of quantitation (LLOQ) was 1.0 ng/mL for moclobemide. The method was validated from LLOQ to 1980 ng/mL with a coefficient of determination greater than 0.999. Intra‐ and inter‐day accuracies of the method at three concentrations ranged from 89.1 to 100.9% for moclobemide with precision of 1.1–9.6%. This validated method was successfully applied to bidirectional transport study of moclobemide blood–brain barrier permeability. Copyright © 2013 John Wiley & Sons, Ltd.     

Fast analysis of triterpenoids in Ganoderma lucidum spores by ultra‐performance liquid chromatography coupled with triple quadrupole mass spectrometry

A rapid and reliable method was established for simultaneous determination of main triterpenoids in Ganoderma lucidum spores using ultra‐high‐performance liquid chromatography coupled with triple quadrupole mass spectrometry (UPLC‐TQ‐MS). The established method was validated in terms of linearity, sensitivity, precision, accuracy and stability, and was successfully applied to determine the contents of 10 main triterpenoids in different batches of G. lucidum spores. The analysis results showed that moderate levels of triterpenoids were found in G. lucidum spores. In addition, a MS full scan with a daughter ion scan experiment was performed to identify the potential derivatives of triterpenoids present in G. lucidum spores. As a result, a total of 22 triterpenoids from different G. lucidum spores were unequivocally or tentatively identified via comparisons with authentic standards and literatures. This method provides both qualitative and quantitative results without the need for repetitive UPLC‐MS analyses, thereby increasing efficiency and productivity, making it suitable for high‐throughput applications. Copyright © 2013 John Wiley & Sons, Ltd.     

Rapid LC‐MS/MS determination and pharmacokinetic application of linarin in rat plasma

A sensitive, selective and robust liquid chromatography tandem mass spectrometry (LC‐MS/MS) method was developed for the rapid determination of linarin in rat plasma. Separation of the analyte and warfarin as internal standard (IS) from 100 μL rat plasma was carried out by simple protein precipitation treatment. Chromatographic separation of the analyte was performed on a Diamonsil® C₁₈ column (150 × 4.6 mm, 5 µm) using isocratic mobile phase consisting of methanol–0.5% formic acid (80:20, v/v). The flow rate was 0.6 mL/min and the total run time was not more than 4.0 min. The method was validated over a wide dynamic concentration range of 1.00–1000 ng/mL for linarin. The precision and accuracy values for linarin met the acceptance criteria according to US Food and Drug Administration guidelines. Linarin was stable in the stability studies including a long‐term test (?80°C for 43 days), a short‐term test (ambient for 2 h and autosampler for 8 h) and three freeze–thaw cycles (?80–25°C). The developed assay method was applied to the pharmacokinetic study in rats after a single intramuscular administration of 713 µg/kg linarin. Copyright © 2012 John Wiley & Sons, Ltd.     

Evaluation of calcipotriol transdermal permeation through pig,rat and mouse skin using liquid chromatography–tandem mass spectrometry

A rapid and sensitive liquid chromatography–tandem mass spectrometric method to evaluate the permeation and retention of calcipotriol in excised samples of pig, rat and mouse skin after application of a calcipotriol ointment has been developed and validated. After sample preparation of ointment, skin homogenate and receptor medium by liquid–liquid extraction, chromatography was performed on an Extend‐C₁₈ column using isocratic elution. Detection was by electrospray ionization in the negative ion mode using multiple‐reaction monitoring of the precursor to product ion transitions of calcipotriol at m/z 411.1 → 393.5, and of lovastatin (internal standard) at m/z 403.2 → 101.2. The assay was linear in all matrices with LLOQs of 1, 0.5 and 40 ng/mL for skin homogenate, receptor medium and ointment samples respectively. In terms of the permeation profiles, it was found that calcipotriol permeated through all skins to only a limited extent over 20 h after application but was efficiently retained in all skins at a level at 20 h of between 40% (pig) and 60% (rat and mouse) of the applied dose. This indicates that calcipotriol ointment has the potential to provide sustained therapeutic benefit in the treatment of psoriasis with minimal systemic side effects. Copyright © 2013 John Wiley & Sons, Ltd.     

Production, Characterization, and Application of an Organic Solvent-Tolerant Lipase Present in Active Inclusion Bodies

An organic solvent-tolerant lipase from Serratia marcescens ECU1010 (rSML) was overproduced in Escherichia coli in an insoluble form. High concentrations of both biomass (50 g cell wet weight/L culture broth) and inclusion bodies (10.5 g/L) were obtained by applying a high-cell-density cultivation procedure. Activity assays indicated that the enzymatic activity of rSML reached 600 U/L. After treatment with isopropyl ether for 12 h, the maximum lipase activity reached 6,000 U/L. Scanning electron microscopy and Fourier transform infrared microspectroscopy revealed the activation mechanism of rSML in the presence of organic solvents. rSML was stable in broad ranges of temperatures and pH values, as well as in a series of organic solvents. Besides, rSML showed the best enantioselectivity for the kinetic resolution of (±)-trans-3-(4-methoxyphenyl)glycidic acid methyl ester. These features render the S. marcescens ECU1010 lipase attractive for biotechnological applications in the field of organic synthesis and pharmaceutical industry.     

On the equilibrium set of magnetostatic energy by differential inclusion

This paper concerns the set of equilibriums of the nonlocal magnetostatic energy for saturated magnetizations. We study the stability of the equilibrium set under the weak-star convergence using methods of differential inclusion and quasiconvex analysis. The equilibrium set is shown to be unstable under the weak-star convergence and an estimate on its weak-star closure is obtained. This estimate is also shown to be accurate when the physical domain is an ellipsoid.     

A new method for the synthesis of 3-hydroxymethylbenzofuran

A new one-step synthesis of 3-hydroxymethylbenzofuran, based on intramolecular cyclization of 2- （methoxymethyl）-2-（2＇-methoxymethyl-4＇-methylphenyl）-butanone I under diluted hydrochloric acid in THF, was developed. The mechanism for this process was investigated via chemical equilibrium shift of tautomer in acidic conditions. The applicability of this new method was studied further in this paper.