DNA／聚（3-甲基噻吩）复合膜修饰电极的制备及其应用于研究8-羟基-2＇-脱氧鸟嘌呤核苷的伏安行为及测定

首先通过电聚合方法在玻碳电极表面制备了聚（3-甲基噻吩）（P3MT）修饰膜,然后在一定电位下将DNA分子电沉积到P3MT表面,制备了DNA／（P3MT）复合膜修饰玻碳电极．研究了8-羟基-2’-脱氧鸟嘌呤核苷（8-OH-dG）在该复合膜修饰电极上的伏安行为以及扫描速度、pH值和尿酸对其伏安行为和检测的影响．实验结果表明,该复合膜修饰电极结合了P3MT和DNA两者的优点,使8-OH-dG在复合膜修饰电极上的电化学行为明显改善,而且具有很好的重现性和稳定性．在0．1mol／LpH7．0的磷酸盐缓冲溶液（PBS）中,8-OH-dG的氧化峰电流与其浓度在0．28～4．2μmol／L和4．2～19．6μmol／L两个范围内成良好的线性关系,检出限为56nmol／L（S／N=3）．该研究可以为制备HPLC或毛细管电泳电化学检测器检测8-OH—dG打下一定的基础,因此在检测尿样中8-OH-dG的研究方面具有潜在的应用价值．     

One-pot synthesis of stable NIR tetracene diimides via double cross-coupling

Tetracene tetracarboxylic diimides have been synthesized based on direct double ring extension of electron-deficient naphthalene diimides involving metallacyclopentadienes. Atomic structure and electronic transitions responsible for their NIR absorption spectra are investigated with quantum-chemical calculations. In light of their unique structure and admirable photophysical and electronic properties, this new molecular skeleton is promising candidate for n-type semiconductors.     

IVSPlat 1.0: an integrated virtual screening platform with a molecular graphical interface

Background  

The virtual screening (VS) of lead compounds using molecular docking and pharmacophore detection is now an important tool in drug discovery. VS tasks typically require a combination of several software tools and a molecular graphics system. Thus, the integration of all the requisite tools in a single operating environment could reduce the complexity of running VS experiments. However, only a few freely available integrated software platforms have been developed.     

高碘酸氧化法快速测定进口粗甘油中甘油含量

建立了高碘酸氧化法快速测定进口粗甘油中甘油含量的分析方法。对高碘酸钠加入量、溶液pH值和放置时间等主要影响因素进行了考察。经试验确定了最佳实验条件:质量浓度为60 g/L的高碘酸钠溶液加入量35mL,pH值在0.4～1.6之间,放置时间40 min。在选定实验条件下,该方法测定结果的相对标准偏差为1.26%(n=7),加标回收率为97.2%～104.1%。     

Ultrathin Alternating Copolymer Nanotubes with Readily Tunable Surface Functionalities

Well‐defined ultrathin nanotubes (30 nm in diameter and of micrometer‐scale length) were generated through the self‐assembly of a novel alternative copolymer synthesized using an epoxy–thiol click‐chemistry reaction. The self‐assembly mechanism was investigated both by experiments and using dissipative particle dynamics (DPD) simulations. The obtained nanotubes can be readily functionalized with carboxy groups, amino groups, peptides, or other groups by simple modular click copolymerization.     

单链和寡链等规聚苯乙烯聚集体的结晶行为

自1960年Hoffman等提出聚合物结晶成核理论以来,人们对聚合物结晶生长速率、片晶的侧向尺寸随过冷度的变化等现象成功地进行了理论描述．1997年,Hoffman等对聚合物结晶成核理论进行修正,将de Gennes的聚合物“蛇行”概念。引入表面成核理论,通过对单根分子链从过冷熔体“卷绕”到晶体前沿所需的时间进行估算,其结果远远低于Flory预言时间约3～5个数量级,据此,Hoff-man认为,在聚合物结晶过程中,分子链在强迫稳态下的“蛇行”运动有足够的时间解缠结和结晶。     

Sonochemical Preparation of Micro- and Nanometer Cu2O

Cu2O particles with different morphologies and scales were prepared sonochemically on the solid-liquid interface of CuCl and water, by adjusting the reaction factors. The products were characterized by powder X-ray diffraction（XRD） and scanning electron microscopy（SEM）. The formation and morphology of Cu2O crystals were influenced by high-intensity ultrasound, reaction temperature, and addition of CuCl. The results indicate that micrometer Cu2O was crystallized in cubic and octahedral shapes, whereas, nanometer Cu2O was not produced in well-shaped crystals.     

Medium Optimization Based on Statistical Methodologies for Pristinamycins Production by <Emphasis Type="Italic">Streptomyces pristinaespiralis</Emphasis>

The optimization of nutrient levels for the production of pristinamycins by Streptomyces pristinaespiralis CGMCC 0957 in submerged fermentation was carried out using the statistical methodologies based on the Plackett–Burman design, the steepest ascent method, and the central composite design (CCD). First, the Plackett–Burman design was applied to evaluate the influence of related nutrients in the medium. Soluble starch and MgSO₄·7H₂O were then identified as the most significant nutrients with a confidence level of 99%. Subsequently, the concentrations of the two nutrients were further optimized using response surface methodology of CCD, together with the steepest ascent method. Accordingly, a second-order polynomial regression model was finally fitted to the experimental data. By solving the regression equation from the model and analyzing the response surface, the optimal levels for soluble starch and MgSO₄·7H₂O were determined as 20.95 and 5.67g/L, respectively. Under the optimized medium, the yield of pristinamycins in the shake flask and 5-L bioreactor could reach 1.30 and 1.01g/L, respectively, which is the highest yield reported in literature to date.     

Fluorescence properties of novel rare earth complexes using carboxyl-containing polyaryletherketones as macromolecular ligands

The fluorescence properties of a series of rare earth (Re³⁺ = Eu³⁺, Tb³⁺) polymeric complexes (PEK-Re³⁺-HLs) using three high-T_g novel carboxyl-containing polyaryletherketones (PEK) as macromolecular ligands and small molecules (HL) such as 1,10-phenanthroline (Phen), dibenzoylmethane (DBM) and 8-hydroxyquinoline (HQ) as co-ligands were investigated by means of fluorescence excitation and emission spectroscopy as well as fluorescence lifetime measurement methods. Among them, PEK-1-Re³⁺-Phens, in which the Re³⁺ ions were coordinated simultaneously with Phen and PEK-1 containing both carboxyl and bulky isopropyl groups on the polymer backbone, exhibited strong fluorescence intensities, long lifetimes, and good film-formation properties. The smooth films of PEK-1-Eu³⁺-Phen and PEK-1-Tb³⁺-Phen, cast from their DMF solutions, could emit bright red and green light under the UV lamp of 365 nm, respectively, which characteristics are of great significance for their potential applications in the large area display material fields. The excellent fluorescence properties of complexes in this study were attributed to the synergistic effects of PEK-1 ligand and Phen co-ligand. Especially, the rigid twisted structure and the bulky isopropyl substituents on PEK-1 backbone forced the coordinated rare earth ion moieties apart, and thus the probability of non-radiative decay rate of Re³⁺ ions at the excited levels were decreased to a large extent.     

Structure of aqueous sodium metaborate solutions: X-ray diffraction study

A structural analysis of aqueous sodium metaborate solutions (NaBo₂ · nH₂O, n = 10, 15, 20) at 298 ± 0.5 K by a rapid liquid ??-?? X-ray diffractometry with a highly effective X??celerator detector is reported in present paper. The radial distribution functions (RDF) and theoretical partial radial distribution functions for B-O, O-O, Na-O, Na-B, and Na-Na atom pairs were obtained from precisely diffraction data processing. Structure of aqueous sodium metaborate solutions was given through model calculation and described in three different items: hydrated sodium ion, hydrated metaborate ion and ion association. Effects of concentration on the structure of the solutions were discussed in detail. The mechanisms of ion aggregation and the formation of crystal nuclei in the solution are proposed. The results show that a clear picture of the structure of aqueous sodium metaborate solution has been acquired.